Grizzly 40 Cooler Pad
Get the most out of your Tundra cooler with Hjdeck cooler traction pads.
Cooler Traction Pad. It features a pressure sensitive adhesive back to permanently secure the backing, so you get better traction and less worry when using your cooler as a casting platform.
In addition, your cooler becomes a more comfortable seat because Hjdeck cooler traction pads are made of 6 mm.
Made of 6mm EVA foam. Custom fit for YETI Tundra Cooler 35-160 models.
Material: EVA foam
Thickness: 6mm
Hardness: 60°- 65°
UV: ≥4.5G
1. Customized colors is available.
2. Customized thickness is available.
3. Customized size in you requirement.
4. Customized shape according to supply drawing.
5. Customized logo: We can make logo for your cooler pad.
Wet Sounds SHIVR-55 QT Cooler Pad
Get the most out of your Tundra cooler with Hjdeck cooler traction pads.
Cooler Traction Pad. It features a pressure sensitive adhesive back to permanently secure the backing, so you get better traction and less worry when using your cooler as a casting platform.
In addition, your cooler becomes a more comfortable seat because Hjdeck cooler traction pads are made of 6 mm.
Made of 6mm EVA foam. Custom fit for YETI Tundra Cooler 35-160 models.
Material: EVA foam
Thickness: 6mm
Hardness: 60°- 65°
UV: ≥4.5G
1. Customized colors is available.
2. Customized thickness is available.
3. Customized size in you requirement.
4. Customized shape according to supply drawing.
5. Customized logo: We can make logo for your cooler pad.
Yeti Tundra Haul?Cooler Pad
Get the most out of your Tundra cooler with Hjdeck cooler traction pads.
Cooler Traction Pad. It features a pressure sensitive adhesive back to permanently secure the backing, so you get better traction and less worry when using your cooler as a casting platform.
In addition, your cooler becomes a more comfortable seat because Hjdeck cooler traction pads are made of 6 mm.
Made of 6mm EVA foam. Custom fit for YETI Tundra Cooler 35-160 models.
Material: EVA foam
Thickness: 6mm
Hardness: 60°- 65°
UV: ≥4.5G
1. Customized colors is available.
2. Customized thickness is available.
3. Customized size in you requirement.
4. Customized shape according to supply drawing.
5. Customized logo: We can make logo for your cooler pad.
Yeti Tundra 250 Cooler Pad
Get the most out of your Tundra cooler with Hjdeck cooler traction pads.
Cooler Traction Pad. It features a pressure sensitive adhesive back to permanently secure the backing, so you get better traction and less worry when using your cooler as a casting platform.
In addition, your cooler becomes a more comfortable seat because Hjdeck cooler traction pads are made of 6 mm.
Made of 6mm EVA foam. Custom fit for YETI Tundra Cooler 35-160 models.
Material: EVA foam
Thickness: 6mm
Hardness: 60°- 65°
UV: ≥4.5G
1. Customized colors is available.
2. Customized thickness is available.
3. Customized size in you requirement.
4. Customized shape according to supply drawing.
5. Customized logo: We can make logo for your cooler pad.
Yeti Tundra 105 Cooler Pad
Get the most out of your Tundra cooler with Hjdeck cooler traction pads.
Cooler Traction Pad. It features a pressure sensitive adhesive back to permanently secure the backing, so you get better traction and less worry when using your cooler as a casting platform.
In addition, your cooler becomes a more comfortable seat because Hjdeck cooler traction pads are made of 6 mm.
Made of 6mm EVA foam. Custom fit for YETI Tundra Cooler 35-160 models.
Material: EVA foam
Thickness: 6mm
Hardness: 60°- 65°
UV: ≥4.5G
1. Customized colors is available.
2. Customized thickness is available.
3. Customized size in you requirement.
4. Customized shape according to supply drawing.
5. Customized logo: We can make logo for your cooler pad.
Yeti Tundra 65 Cooler Pad
Get the most out of your Tundra cooler with Hjdeck cooler traction pads.
Cooler Traction Pad. It features a pressure sensitive adhesive back to permanently secure the backing, so you get better traction and less worry when using your cooler as a casting platform.
In addition, your cooler becomes a more comfortable seat because Hjdeck cooler traction pads are made of 6 mm.
Made of 6mm EVA foam. Custom fit for YETI Tundra Cooler 35-160 models.
Material: EVA foam
Thickness: 6mm
Hardness: 60°- 65°
UV: ≥4.5G
1. Customized colors is available.
2. Customized thickness is available.
3. Customized size in you requirement.
4. Customized shape according to supply drawing.
5. Customized logo: We can make logo for your cooler pad.
2017 Chaparral Boats H2O 21 SPORT EVA Foam Faux Teak Boat Deck MatteMarine Flooring Marine Boat Decking Carpet Yacht Pad
Notes:
Please confirm your boat type before adding to cart. If you are not sure if it fits your needs, you can contact us online or send us an email to confirm the size.
If you want to add logo or pattern, you can send JPG image to our email, we will design the pattern and send it to you for confirmation, of course you need to pay extra fee.
Description:
Material: EVA foam
Texture: Brushed / Embossed (Default Brushed)
Thickness: 6mm
Hardness: 60°- 65°
UV: ≥4.5G
Adhesive: 3M99786 (3M Self-Adhesive Backing - No need to buy glue)
If you need other colors, you can email eric@hjdeck.com, we are a factory and can realize the colors you want.
For Design:
1. We can design drawings according to customers' requirements (free of charge).
2. We can provide design drawings for your choice.
3. Support LOGO customization, need file, format file: DXF/AI/PDF/JPJ/PNG, etc.
Installation Notes:
1. Before installation the floor needs to be cleaned with acetone or alcohol (to remove the wax from the surface of the new boat) and make sure it is dry before starting the installation.
2. Lay all EVA flooring flat before installation. After confirming the position, tear off the adhesive backing on one corner and start the installation.
3. Fix the adhesive and do not move the EVA flooring.
4. Use the round wheel to roll during the installation process (you need to press the 5. LOGO position with your finger in advance to avoid air entry). If there is air generated, a small needle can be used to puncture the bubble exclusion.
Note: 48 hours after installation shall not be immersed in water.
Making Templates:
If we don't have a matching boat in our sales list, please provide us with a template and we can manufacture it according to your template requirements. More details of customized templates are available:?https://www.hjdeck.com/pages/custom-features#section6
2005-2007 Formula 31 PC EVA Foam Boat Flooring Cockpit Floor Pad
2005-2007 Formula 31 PC EVA Foam Boat Flooring Cockpit Floor Pad
2005-2007?Formula 31 PC EVA Foam Boat Flooring Cockpit Floor Pad
Precautions
Please confirm your boat type before adding to the shopping cart. If you are not sure whether it meets your needs, you can contact us online or send us an email to confirm the size.
If you want to add your logo or want to add a pattern, you can send a JPG picture to our email, we will design a pattern and send it to you for confirmation, of course there will be a little extra cost that you need to pay.
Products information
Material: EVA foam
Thickness: 6mm
Hardness: 60°- 65°
Color：Teak Brown Black /Gray Black
Or if you need other colors, you can email us, we are a factory and can realize the colors you want
UV: ≥4.5G
Adhesive: 3M99786 （ Self-Adhesive Backing - No need to buy glue）
Application Guide:
2005 Formula 31 PC
2006 Formula 31 PC
2007 Formula 31 PC
2000-2011 Rinker Captiva 262 Cuddy Swim Platform EVA Foam Boat Deck Mat Flooring
2000-2011 Rinker Captiva 262 Cuddy Swim Platform EVA Foam Boat Deck Mat Flooring
2000-2011 Rinker Captiva 262 Cuddy Swim Platform?EVA Foam Faux Teak Boat Deck MatteMarine Flooring Marine Boat Decking
Notes:
Please confirm your boat type before adding to cart. If you are not sure if it fits your needs, you can contact us online or send us an email to confirm the size.
If you want to add logo or pattern, you can send JPG image to our email, we will design the pattern and send it to you for confirmation, of course you need to pay extra fee.
Description:
Material: EVA foam
Texture: Brushed / Embossed (Default Brushed)
Thickness: 6mm
Hardness: 60°- 65°
UV: ≥4.5G
Adhesive: 3M99786 (3M Self-Adhesive Backing - No need to buy glue)
If you need other colors, you can email eric@hjdeck.com, we are a factory and can realize the colors you want.
For Design:
1. We can design drawings according to customers' requirements (free of charge).
2. We can provide design drawings for your choice.
3. Support LOGO customization, need file, format file: DXF/AI/PDF/JPJ/PNG, etc.
Installation Notes:
1. Before installation the floor needs to be cleaned with acetone or alcohol (to remove the wax from the surface of the new boat) and make sure it is dry before starting the installation.
2. Lay all EVA flooring flat before installation. After confirming the position, tear off the adhesive backing on one corner and start the installation.
3. Fix the adhesive and do not move the EVA flooring.
4. Use the round wheel to roll during the installation process (you need to press the 5. LOGO position with your finger in advance to avoid air entry). If there is air generated, a small needle can be used to puncture the bubble exclusion.
Note: 48 hours after installation shall not be immersed in water.
Making Templates:
If we don't have a matching boat in our sales list, please provide us with a template and we can manufacture it according to your template requirements. More details of customized templates are available:?https://www.hjdeck.com/pages/custom-features#section6
Application Guide:
2000-2011 Rinker Captiva 262 Cuddy
Moomba Mojo 2015 EVA Foam Faux Teak Boat Deck MatteMarine Flooring Marine Boat Decking Carpet Yacht Pad
Precautions
Please confirm your boat type before adding to the shopping cart. If you are not sure whether it meets your needs, you can contact us online or send us an email to confirm the size.
If you want to add your logo or want to add a pattern, you can send a JPG picture to our email, we will design a pattern and send it to you for confirmation, of course there will be a little extra cost that you need to pay.
Products information
Material: EVA foam
Thickness: 6mm
Hardness: 60°- 65°
Color: Teak Brown Black /Gray Black
Or if you need other colors, you can email us, we are a factory and can realize the colors you want
UV: ≥4.5G
Adhesive: 3M99786 （ Self-Adhesive Backing - No need to buy glue）
Frequently Asked Questions
What are precut boat flooring kits?
Precut boat flooring kits are CNC-cut EVA foam decking systems designed to fit specific boat models and replace worn marine carpet or vinyl flooring.
Which boat brands do you support?
HJDECK offers custom boat flooring kits for Sea Ray, Malibu, Nautique, MasterCraft, Moomba, Regal, Chaparral, Monterey, Four Winns, Crownline, Yamaha, and many more.
Can I replace marine carpet with EVA foam flooring?
Yes. EVA foam flooring is a popular replacement for traditional marine carpet because it is comfortable, easy to clean, and provides excellent traction.
Do I need professional installation?
No. Most customers can install HJDECK flooring kits themselves using the included layout and marine-grade adhesive backing.
What if my boat model is not listed?
We can create a custom flooring kit from templates, measurements, CAD files, or 3D scans.
Share contact information, store details, and brand content with your customers.
Contact: eric@hjdeck.com
Share contact information, store details, and brand content with your customers.
Contact: eric@hjdeck.com