Sea Ray

1998-2002 SeaRay 210 Sundeck Option A EVA Foam Boat Flooring Marine Decking Swim Platform Cockpit Pad

Precautions

Please confirm your boat type before adding to the shopping cart. If you are not sure whether it meets your needs, you can contact us online or send us an email to confirm the size.

If you want to add your logo or want to add a pattern, you can send a JPG picture to our email, we will design a pattern and send it to you for confirmation, of course there will be a little extra cost that you need to pay.


Products information

Material: EVA foam
Thickness: 6mm
Hardness: 60°- 65°
Color: Teak Brown Black /Gray Black
Or if you need other colors, you can email us, we are a factory and can realize the colors you want
UV: ≥4.5G
Adhesive: Self-Adhesive Backing - No need to buy glue

1997 Sea Ray 210 Signature EVA Foam Boat Flooring Marine Decking Swim Platform Cockpit Pad

Precautions

Please confirm your boat type before adding to the shopping cart. If you are not sure whether it meets your needs, you can contact us online or send us an email to confirm the size.

If you want to add your logo or want to add a pattern, you can send a JPG picture to our email, we will design a pattern and send it to you for confirmation, of course there will be a little extra cost that you need to pay.


Products information

Material: EVA foam
Thickness: 6mm
Hardness: 60°- 65°
Color: Teak Brown Black /Gray Black
Or if you need other colors, you can email us, we are a factory and can realize the colors you want
UV: ≥4.5G
Adhesive: Self-Adhesive Backing - No need to buy glue

1989 Sea Ray 280 Sundancer EVA Foam Faux Teak Boat Deck MatteMarine Flooring Marine Boat Decking

Precautions before payment:

• 1. Please make sure the boat model matches your yacht/boat model.
• 2. Some boat models have different configurations and options, please pay attention to choose the most suitable boat model.
• 3. If you are not sure if your boat matches the drawing, please send us photos of the swim platform and cockpit, we can help to determine the suitability.

We use the best quality Grade A EVA environmental protection material

• 1. Elastic, not easy deformation, not easy to tear.
• 2. High Density, not easy to damage. Odorless, non-toxic.
• 3. Self-adhesion, easy to installation.
• 4. Stain resistant & very easy to maintain, can also be pressure washed.
• 5. Provides a non-slippery surface for your boat in both wet & dry conditions.

Product Description:

1. Customized colors is available.
2. Customized thickness is available.
3. Customized size in you requirement.
4. Customized shape according to supply drawing.
5. Customized logo: We can make logo for your marine traction pad.

For Design:

1. We can design drawings according to customers' requirements (free of charge).

2. We can provide design drawings for your choice.

3. Support LOGO customization, need file, format file: DXF/AI/PDF/JPJ/PNG, etc.

Making Templates:

If we don't have a matching boat in our sales list, please provide us with a template and we can manufacture it according to your template requirements. More details of customized templates are available: https://www.hjdeck.com/pages/custom-features#section6

Production period:

Confirm the size with you after receiving the payment, start production after confirming the size, the production process usually takes about 5-12 working days (holidays postponed), we will send you the photos and ship the order after the production is completed.

The production period for orders with customized colors/templates takes about 10-25 working days to ship.

Installation Notes:

Before installation the floor needs to be cleaned with acetone or alcohol (to remove the wax from the surface of the new boat) and make sure it is dry before starting the installation.
Lay all EVA flooring flat before installation. After confirming the position, tear off the adhesive backing on one corner and start the installation.
Fix the adhesive and do not move the EVA flooring.
Use the round wheel to roll during the installation process (you need to press the LOGO position with your finger in advance to avoid air entry). If there is air generated, a small needle can be used to puncture the bubble exclusion.
48 hours after installation shall not be immersed in water.

Upgrade your boat with stylish and functional EVA Foam Decking from Our Designs. Our EVA foam is a high performance, cushioned decking material that feels comfortable and stable underfoot. And with its stunning good looks, it adds a clean, high-end look to your vessel.

Other:

You can choose any parts shown in the drawing to place an order, and we can provide corresponding production and sales support.

Discounts are available for repeat orders, please feel free to contact us!

Click here to contact us.

2005 Sea Ray 240 SP EVA Foam Teak Deck Floor Mat

Notes:

Please confirm your boat type before adding to cart. If you are not sure if it fits your needs, you can contact us online or send us an email to confirm the size.

If you want to add logo or pattern, you can send JPG image to our email, we will design the pattern and send it to you for confirmation, of course you need to pay extra fee.

Description:

Material: EVA foam
Texture: Brushed / Embossed (Default Brushed)
Thickness: 6mm
Hardness: 60°- 65°
UV: ≥4.5G
Adhesive: 3M99786 (3M Self-Adhesive Backing - No need to buy glue)
If you need other colors, you can email eric@hjdeck.com, we are a factory and can realize the colors you want.

For Design:

1. We can design drawings according to customers' requirements (free of charge).

2. We can provide design drawings for your choice.

3. Support LOGO customization, need file, format file: DXF/AI/PDF/JPJ/PNG, etc.

Installation Notes:

1. Before installation the floor needs to be cleaned with acetone or alcohol (to remove the wax from the surface of the new boat) and make sure it is dry before starting the installation.
2. Lay all EVA flooring flat before installation. After confirming the position, tear off the adhesive backing on one corner and start the installation.
3. Fix the adhesive and do not move the EVA flooring.
4. Use the round wheel to roll during the installation process (you need to press the 5. LOGO position with your finger in advance to avoid air entry). If there is air generated, a small needle can be used to puncture the bubble exclusion.
Note: 48 hours after installation shall not be immersed in water.

Making Templates:

If we don't have a matching boat in our sales list, please provide us with a template and we can manufacture it according to your template requirements. More details of customized templates are available:?https://www.hjdeck.com/pages/custom-features#section6

2004 Sea ray Sundancer 340 EVA Foam Faux Teak Boat Deck Mat Flooring Marine Boat Decking Carpet Pad

Notes:

Please confirm your boat type before adding to cart. If you are not sure if it fits your needs, you can contact us online or send us an email to confirm the size.

If you want to add logo or pattern, you can send JPG image to our email, we will design the pattern and send it to you for confirmation, of course you need to pay extra fee.

Description:

Material: EVA foam
Texture: Brushed / Embossed (Default Brushed)
Thickness: 6mm
Hardness: 60°- 65°
UV: ≥4.5G
Adhesive: 3M99786 (3M Self-Adhesive Backing - No need to buy glue)
If you need other colors, you can email eric@hjdeck.com, we are a factory and can realize the colors you want.

For Design:

1. We can design drawings according to customers' requirements (free of charge).

2. We can provide design drawings for your choice.

3. Support LOGO customization, need file, format file: DXF/AI/PDF/JPJ/PNG, etc.

Installation Notes:

1. Before installation the floor needs to be cleaned with acetone or alcohol (to remove the wax from the surface of the new boat) and make sure it is dry before starting the installation.
2. Lay all EVA flooring flat before installation. After confirming the position, tear off the adhesive backing on one corner and start the installation.
3. Fix the adhesive and do not move the EVA flooring.
4. Use the round wheel to roll during the installation process (you need to press the 5. LOGO position with your finger in advance to avoid air entry). If there is air generated, a small needle can be used to puncture the bubble exclusion.
Note: 48 hours after installation shall not be immersed in water.

Making Templates:

If we don't have a matching boat in our sales list, please provide us with a template and we can manufacture it according to your template requirements. More details of customized templates are available:?https://www.hjdeck.com/pages/custom-features#section6

2005 Sea Ray 340 Sundancer EVA Foam Faux Teak Boat Deck Mat Flooring Marine Boat Decking Carpet Pad

Notes:

Please confirm your boat type before adding to cart. If you are not sure if it fits your needs, you can contact us online or send us an email to confirm the size.

If you want to add logo or pattern, you can send JPG image to our email, we will design the pattern and send it to you for confirmation, of course you need to pay extra fee.

Description:

Material: EVA foam
Texture: Brushed / Embossed (Default Brushed)
Thickness: 6mm
Hardness: 60°- 65°
UV: ≥4.5G
Adhesive: 3M99786 (3M Self-Adhesive Backing - No need to buy glue)
If you need other colors, you can email eric@hjdeck.com, we are a factory and can realize the colors you want.

For Design:

1. We can design drawings according to customers' requirements (free of charge).

2. We can provide design drawings for your choice.

3. Support LOGO customization, need file, format file: DXF/AI/PDF/JPJ/PNG, etc.

Installation Notes:

1. Before installation the floor needs to be cleaned with acetone or alcohol (to remove the wax from the surface of the new boat) and make sure it is dry before starting the installation.
2. Lay all EVA flooring flat before installation. After confirming the position, tear off the adhesive backing on one corner and start the installation.
3. Fix the adhesive and do not move the EVA flooring.
4. Use the round wheel to roll during the installation process (you need to press the 5. LOGO position with your finger in advance to avoid air entry). If there is air generated, a small needle can be used to puncture the bubble exclusion.
Note: 48 hours after installation shall not be immersed in water.

Making Templates:

If we don't have a matching boat in our sales list, please provide us with a template and we can manufacture it according to your template requirements. More details of customized templates are available:?https://www.hjdeck.com/pages/custom-features#section6

1997-1999 Sea Ray 270 sundancer?EVA Foam Faux Teak Boat Deck MatteMarine Flooring Marine Boat Decking Carpet Leaf Yacht Vehicle Pad

Precautions

Please confirm your boat type before adding to the shopping cart. If you are not sure whether it meets your needs, you can contact us online or send us an email to confirm the size.

If you want to add your logo or want to add a pattern, you can send a JPG picture to our email, we will design a pattern and send it to you for confirmation, of course there will be a little extra cost that you need to pay.


Products information

Material: EVA foam
Thickness: 6mm
Hardness: 60°- 65°
Color：Teak Brown Black /Gray Black
Or if you need other colors, you can email us, we are a factory and can realize the colors you want
UV: ≥4.5G
Adhesive: 3M99786 （ Self-Adhesive Backing - No need to buy glue）

1992-1999 Sea Ray 400 Express Cruiser EVA Foam Faux Teak Boat Deck MatteMarine Flooring Marine Boat Decking Carpet Leaf Yacht Vehicle Pad

Precautions

Please confirm your boat type before adding to the shopping cart. If you are not sure whether it meets your needs, you can contact us online or send us an email to confirm the size.

If you want to add your logo or want to add a pattern, you can send a JPG picture to our email, we will design a pattern and send it to you for confirmation, of course there will be a little extra cost that you need to pay.


Products information

Material: EVA foam
Thickness: 6mm
Hardness: 60°- 65°
Color：Teak Brown Black /Gray Black
Or if you need other colors, you can email us, we are a factory and can realize the colors you want
UV: ≥4.5G
Adhesive: 3M99786 （ Self-Adhesive Backing - No need to buy glue）

2000–2001 SEA RAY 240 Sundeck A EVA Foam Teak Deck Floor Mat

Square holes are used in the middle of the bow and cockpit floor of the boat.

Application Guide:

2000 searay 240 sundeck
2001 searay 240 sundeck

Notes:

Please confirm your boat type before adding to cart. If you are not sure if it fits your needs, you can contact us online or send us an email to confirm the size.

If you want to add logo or pattern, you can send JPG image to our email, we will design the pattern and send it to you for confirmation, of course you need to pay extra fee.

Description:

Material: EVA foam
Texture: Brushed / Embossed (Default Brushed)
Thickness: 6mm
Hardness: 60°- 65°
UV: ≥4.5G
Adhesive: 3M99786 (3M Self-Adhesive Backing - No need to buy glue)
If you need other colors, you can email eric@hjdeck.com, we are a factory and can realize the colors you want.

For Design:

1. We can design drawings according to customers' requirements (free of charge).

2. We can provide design drawings for your choice.

3. Support LOGO customization, need file, format file: DXF/AI/PDF/JPJ/PNG, etc.

Installation Notes:

1. Before installation the floor needs to be cleaned with acetone or alcohol (to remove the wax from the surface of the new boat) and make sure it is dry before starting the installation.
2. Lay all EVA flooring flat before installation. After confirming the position, tear off the adhesive backing on one corner and start the installation.
3. Fix the adhesive and do not move the EVA flooring.
4. Use the round wheel to roll during the installation process (you need to press the 5. LOGO position with your finger in advance to avoid air entry). If there is air generated, a small needle can be used to puncture the bubble exclusion.
Note: 48 hours after installation shall not be immersed in water.

Making Templates:

If we don't have a matching boat in our sales list, please provide us with a template and we can manufacture it according to your template requirements. More details of customized templates are available:?https://www.hjdeck.com/pages/custom-features#section6

2016 Sea ray 210 SPX SPXE EVA Foam Boat Flooring Marine Decking Swim Platform Cockpit Pad

Precautions

Please confirm your boat type before adding to the shopping cart. If you are not sure whether it meets your needs, you can contact us online or send us an email to confirm the size.

If you want to add your logo or want to add a pattern, you can send a JPG picture to our email, we will design a pattern and send it to you for confirmation, of course there will be a little extra cost that you need to pay.


Products information

Material: EVA foam
Thickness: 6mm
Hardness: 60°- 65°
Color: Teak Brown Black /Gray Black
Or if you need other colors, you can email us, we are a factory and can realize the colors you want
UV: ≥4.5G
Adhesive: 3M99786 （ Self-Adhesive Backing - No need to buy glue）