It went on easy and fit perfect. Too soon to tell if it will hold, but hopefully it will.
2015-2021 Yamaha 240 242 Cockpit Kit Marine Mat
Precautions before payment:
- 1. Please make sure the boat model matches your yacht/boat model.
- 2. Some boat models have different configurations and options, please pay attention to choose the most suitable boat model.
- 3. If you are not sure if your boat matches the drawing, please send us photos of the swim platform and cockpit, we can help to determine the suitability.
Adaptation:
2015-2021 Yamaha AR 240
2015-2021 Yamaha 242 Limited S
Yamaha 242 Limited, SX240, & AR240
Upgrade your boat with stylish and functional EVA Foam Decking from Our Designs. Our EVA foam is a high performance, cushioned decking material that feels comfortable and stable underfoot. And with its stunning good looks, it adds a clean, high-end look to your vessel.
We use the best quality Grade A EVA environmental protection material
- 1. Elastic, not easy deformation, not easy to tear.
- 2. High Density, not easy to damage. Odorless, non-toxic.
- 3. Self-adhesion, easy to installation.
- 4. Stain resistant & very easy to maintain, can also be pressure washed.
- 5. Provides a non-slippery surface for your boat in both wet & dry conditions.
Product Description:
|
Material
|
Closed Cell EVA Foam
|
|
Hardness
|
60°-65°
|
|
Thickness
|
6 mm
|
|
Textures
|
Customizable
|
|
Adhesive
|
3M99786
|
1. Customized colors is available.
2. Customized thickness is available.
3. Customized size in you requirement.
4. Customized shape according to supply drawing.
5. Customized logo: We can make logo for your marine traction pad.
For Design:
1. We can design drawings according to customers' requirements (free of charge).
2. We can provide design drawings for your choice.
3. Support LOGO customization, need file, format file: DXF/AI/PDF/JPJ/PNG, etc.
Installation Notes:
Before installation the floor needs to be cleaned with acetone or alcohol (to remove the wax from the surface of the new boat) and make sure it is dry before starting the installation.
Lay all EVA flooring flat before installation. After confirming the position, tear off the adhesive backing on one corner and start the installation.
Fix the adhesive and do not move the EVA flooring.
Use the round wheel to roll during the installation process (you need to press the LOGO position with your finger in advance to avoid air entry). If there is air generated, a small needle can be used to puncture the bubble exclusion.
48 hours after installation shall not be immersed in water.
Making Templates:
If we don't have a matching boat in our sales list, please provide us with a template and we can manufacture it according to your template requirements. More details of customized templates are available: https://www.hjdeck.com/pages/custom-features#section6
Production period:
Confirm the size with you after receiving the payment, start production after confirming the size, the production process usually takes about 5-12 working days (holidays postponed), we will send you the photos and ship the order after the production is completed.
The production period for orders with customized colors/templates takes about 10-25 working days to ship.
Other:
You can choose any parts shown in the drawing to place an order, and we can provide corresponding production and sales support.
Discounts are available for repeat orders, please feel free to contact us!
?
2003-2006 Yamaha AR SX 230 Cockpit & Swim Platform Pads for Boats
Application Guide:
2003 Yamaha AR 230
2004 Yamaha AR 230
2005 Yamaha AR 230
2006 Yamaha AR 230
2003 Yamaha SX 230
2004 Yamaha SX 230
2005 Yamaha SX 230
2006 Yamaha SX 230
2003 Yamaha SR 230
2004 Yamaha SR 230
2005 Yamaha SR 230
2006 Yamaha SR 230
2003 Yamaha AR 232 (232 Limited S)
2004 Yamaha AR 232 (232 Limited S)
2005 Yamaha AR 232 (232 Limited S)
2006 Yamaha AR 232 (232 Limited S)
2003 Yamaha SX 232 (232 Limited S)
2004 Yamaha SX 232 (232 Limited S)
2005 Yamaha SX 232 (232 Limited S)
2006 Yamaha SX 232 (232 Limited S)
2003 Yamaha SR 232 (232 Limited S)
2004 Yamaha SR 232 (232 Limited S)
2005 Yamaha SR 232 (232 Limited S)
2006 Yamaha SR 232 (232 Limited S)
Precautions before payment:
- 1. Please make sure the boat model matches your yacht/boat model.
- 2. Some boat models have different configurations and options, please pay attention to choose the most suitable boat model.
- 3. If you are not sure if your boat matches the drawing, please send us photos of the swim platform and cockpit, we can help to determine the suitability.
Upgrade your boat with stylish and functional EVA Foam Decking from Our Designs. Our EVA foam is a high performance, cushioned decking material that feels comfortable and stable underfoot. And with its stunning good looks, it adds a clean, high-end look to your vessel.
We use the best quality Grade A EVA environmental protection material
- 1. Elastic, not easy deformation, not easy to tear.
- 2. High Density, not easy to damage. Odorless, non-toxic.
- 3. Self-adhesion, easy to installation.
- 4. Stain resistant & very easy to maintain, can also be pressure washed.
- 5. Provides a non-slippery surface for your boat in both wet & dry conditions.
Product Description:
|
Material
|
Closed Cell EVA Foam
|
|
Hardness
|
60°-65°
|
|
Thickness
|
6 mm
|
|
Textures
|
Customizable
|
|
Adhesive
|
3M99786
|
1. Customized colors is available.
2. Customized thickness is available.
3. Customized size in you requirement.
4. Customized shape according to supply drawing.
5. Customized logo: We can make logo for your marine traction pad.
For Design:
1. We can design drawings according to customers' requirements (free of charge).
2. We can provide design drawings for your choice.
3. Support LOGO customization, need file, format file: DXF/AI/PDF/JPJ/PNG, etc.
Installation Notes:
Before installation the floor needs to be cleaned with acetone or alcohol (to remove the wax from the surface of the new boat) and make sure it is dry before starting the installation.
Lay all EVA flooring flat before installation. After confirming the position, tear off the adhesive backing on one corner and start the installation.
Fix the adhesive and do not move the EVA flooring.
Use the round wheel to roll during the installation process (you need to press the LOGO position with your finger in advance to avoid air entry). If there is air generated, a small needle can be used to puncture the bubble exclusion.
48 hours after installation shall not be immersed in water.
Making Templates:
If we don't have a matching boat in our sales list, please provide us with a template and we can manufacture it according to your template requirements. More details of customized templates are available: https://www.hjdeck.com/pages/custom-features#section6
Production period:
Confirm the size with you after receiving the payment, start production after confirming the size, the production process usually takes about 5-12 working days (holidays postponed), we will send you the photos and ship the order after the production is completed.
The production period for orders with customized colors/templates takes about 10-25 working days to ship.
Other:
You can choose any parts shown in the drawing to place an order, and we can provide corresponding production and sales support.
Discounts are available for repeat orders, please feel free to contact us!
2006 Centurion Lightning C4 Custom EVA Foam Boat Flooring Kit
Product Specifications
- Material: Marine-grade EVA foam
- Thickness: 6 mm
- Hardness: 60°–65°
- UV Resistance: ≥4.5G
- Surface Texture: Brushed or embossed
- Backing: Marine-grade self-adhesive backing
- Installation: Peel and stick—no additional glue required
Important Before Ordering
Boat layouts can vary by production year, model version, factory options, engine configuration, or previous modifications. Please carefully compare the product’s panel layout with your boat deck before ordering.
If you are unsure about the fit, email clear photos of your complete deck to eric@hjdeck.com. Please include your boat’s exact year, full model name, and the areas you want to cover. We will help you verify the layout before production.
Please dry-fit and inspect every panel before removing the release liner, trimming the material, or permanently installing the flooring. If anything appears different from your boat layout, contact us before making modifications.
Colors, Patterns and Custom Logos
Multiple color combinations, surface textures, line styles, and engraved patterns are available. Because colors may appear different under various lighting conditions and screen settings, customers who require a specific color match should contact us before ordering.
Custom boat names, registration numbers, and logos are also available. Send your artwork in AI, DXF, PDF, SVG, PNG, or high-resolution JPG format. We will provide a design proof for approval before production. An additional fee may apply to certain custom designs and will be confirmed in advance.
Production and Delivery
Each flooring kit is custom-made after the boat layout and design details are confirmed. Standard production time is approximately 5–8 business days. Estimated shipping time after dispatch is approximately 7–15 days, depending on the destination and carrier.
Custom-Made Product Notice
This is a custom-made product manufactured according to the selected boat layout, color, pattern, and personalization options. Please review all confirmed details carefully before production begins.
If any panel arrives with permanent shipping damage or appears to have a production-related issue, do not install or modify it. Lay the affected panel flat and send us clear photos so we can review the issue and provide an appropriate solution.
Questions about fitment, colors, or customization?
Contact us at eric@hjdeck.com.
Customs --- Designed for Yeti Tundra 35 45 65 Cooler, perfect fit your cooler
Material --- Made of high quality EVA foam, durable for a long time
Soft --- 6mm foam pad, provide maximum comfort whether you're sitting or standing on the cooler pad
Easy to Install --- Self-adhesive cooler pad, just need cleaner the surface of cooler, then peel and stick, finish
Easy to Clean --- Hjdeck cooler pad for Yeti Tundra 35 45 65, stain resistant and easy to maintain, you can easily wipe and dirt on it
- Available in 3 colors
- 6mm Thickness
- Faux Teak Texture
- Outer Route Design
- With strong adhesive, easy to install
HJDeck cooler pads are easy to use and install. We can customize any cooler pad with your logo. The possibilities are endless!
Small Diamond Self-Adhesive EVA Foam Boat Flooring Marine Boat Decking Sheet Non-Slip Mat for Motor Boats Pontoon Yacht Swim Platform Helm Pad RV Floor - Hjdeck
About this item
Premium EVA Foam: This self-adhesive boat decking mat is made from high-quality EVA foam and has the advantages of good cushioning, sound & shock absorption, and non-skid. It is high tensile elongation, is not easy to deform or damage, is safe, and can be durable for a long time ( Thickness: ± 5mm EVA foam).
Feature:?EVA foam boat flooring sheet features diamond ditches, can increase friction, and play a good anti-skid; it also can quickly guide rainwater out if it rains. In addition, the EVA foam boat decking sheet provides exceptional comfort.
Easy to Install:?EVA foam sheets have strong glue at the back, self-adhesive to install boat flooring foam mat to the floor surface. It can also be freely cut to a suitable size, and?EVA foam boat decking flooring fits the different shapes of decks.
Wide Application:?5mm EVA foam boat flooring sheet perfect for boat decking, RV flooring, kayak deck, yacht floor, floating dock, golf cart, swimming platform pad, boat trailer, surfboard pad, traction pad, motor boat, boat flooring decking, marine deck, car flooring or other places.
Easy to Clean: This EVA marine flooring is stain resistant and easy to maintain; if dirty, it can be washed with a vacuum cleaner or pressure washed.
2008 Tige 22-24 VE EVA Foam Faux Teak Boat Deck MatteMarine Flooring Marine Boat Decking Carpet Yacht Pad
Notes:
Please confirm your boat type before adding to cart. If you are not sure if it fits your needs, you can contact us online or send us an email to confirm the size.
If you want to add logo or pattern, you can send JPG image to our email, we will design the pattern and send it to you for confirmation, of course you need to pay extra fee.
Description:
Material: EVA foam
Texture: Brushed / Embossed (Default Brushed)
Thickness: 6mm
Hardness: 60°- 65°
UV: ≥4.5G
Adhesive: 3M99786 (3M Self-Adhesive Backing - No need to buy glue)
If you need other colors, you can email eric@hjdeck.com, we are a factory and can realize the colors you want.
For Design:
1. We can design drawings according to customers' requirements (free of charge).
2. We can provide design drawings for your choice.
3. Support LOGO customization, need file, format file: DXF/AI/PDF/JPJ/PNG, etc.
Installation Notes:
1. Before installation the floor needs to be cleaned with acetone or alcohol (to remove the wax from the surface of the new boat) and make sure it is dry before starting the installation.
2. Lay all EVA flooring flat before installation. After confirming the position, tear off the adhesive backing on one corner and start the installation.
3. Fix the adhesive and do not move the EVA flooring.
4. Use the round wheel to roll during the installation process (you need to press the 5. LOGO position with your finger in advance to avoid air entry). If there is air generated, a small needle can be used to puncture the bubble exclusion.
Note: 48 hours after installation shall not be immersed in water.
Making Templates:
If we don't have a matching boat in our sales list, please provide us with a template and we can manufacture it according to your template requirements. More details of customized templates are available:https://www.hjdeck.com/pages/custom-features#section6
2019–2025 Sea-Doo GTX Jet Ski Traction Mats – EVA Foam Kit
Notes:
Please confirm your boat type before adding to cart. If you are not sure if it fits your needs, you can contact us online or send us an email to confirm the size.
If you want to add logo or pattern, you can send JPG image to our email, we will design the pattern and send it to you for confirmation, of course you need to pay extra fee.
We use the best quality Grade A EVA environmental protection material
- 1. Elastic, not easy deformation, not easy to tear.
- 2. High Density, not easy to damage. Odorless, non-toxic.
- 3. Self-adhesion, easy to installation.
- 4. Stain resistant & very easy to maintain, can also be pressure washed.
- 5. Provides a non-slippery surface for your boat in both wet & dry conditions.
Product Description:
|
Material
|
Closed Cell EVA Foam
|
|
Hardness
|
60°-65°
|
|
Thickness
|
6 mm
|
|
Textures
|
Customizable
|
|
Adhesive
|
3M99786 (3M Self-Adhesive Backing - No need to buy glue)
|
1. Customized colors is available.
2. Customized thickness is available.
3. Customized size in you requirement.
4. Customized shape according to supply drawing.
5. Customized logo: We can make logo for your marine flooring.
For Design:
1. We can design drawings according to customers' requirements (free of charge).
2. We can provide design drawings for your choice.
3. Support LOGO customization, need file, format file: DXF/AI/PDF/JPJ/PNG, etc.
Installation Notes:
- Before installation the floor needs to be cleaned with acetone or alcohol (to remove the wax from the surface of the new boat) and make sure it is dry before starting the installation.
- Lay all EVA flooring flat before installation. After confirming the position, tear off the adhesive backing on one corner and start the installation.
- Fix the adhesive and do not move the EVA flooring.
- Use the?Rubber Roller?to roll during the installation process (you need to press the LOGO position with your finger in advance to avoid air entry). If there is air generated, a small needle can be used to puncture the bubble exclusion.
- 48 hours after installation shall not be immersed in water.
Making Templates:
If we don't have a matching boat in our sales list, please provide us with a template and we can manufacture it according to your template requirements. More details of customized templates are available:?https://www.hjdeck.com/pages/custom-features#section6
Production period:
Confirm the size with you after receiving the payment, start production after confirming the size, the production process usually takes about 5-12 working days (holidays postponed), we will send you the photos and ship the order after the production is completed.
The production period for orders with customized colors/templates takes about 10-25 working days to ship.
Other:
You can choose any parts shown in the drawing to place an order, and we can provide corresponding production and sales support.
Discounts are available for repeat orders, please feel free to contact us!
Application Guide:
2020-2024 Sea-Doo GTX 170
2023 Sea-Doo GTX Limited
2019-2025 Sea-Doo GTX 230
2019-2020 Sea-Doo RXT 230
2020 Sea-Doo Wake Pro 230
2020-2025 Seadoo GTX Limited 300
2006-2009 Nautique 220 EVA Foam Faux Teak Boat Deck Mat Flooring Marine Decking
77518
$775.18
Einzelpreis pro2006-2009 Nautique 220 EVA Foam Faux Teak Boat Deck Mat Flooring Marine Decking
77518
$775.18
Einzelpreis pro2006 - 2009 Super Air Nautique 220 EVA Foam Faux Teak Boat Flooring Marine Decking
Notes:
Please confirm your boat type before adding to cart. If you are not sure if it fits your needs, you can contact us online or send us an email to confirm the size.
If you want to add logo or pattern, you can send JPG image to our email, we will design the pattern and send it to you for confirmation, of course you need to pay extra fee.
Description:
Material: EVA foam
Thickness: 6mm
Hardness: 60°- 65°
UV: ≥4.5G
Adhesive: 3M99786 (3M Self-Adhesive Backing - No need to buy glue)
If you need other colors, you can email eric@hjdeck.com, we are a factory and can realize the colors you want.
1. Customized colors is available.
2. Customized thickness is available.
3. Customized size in you requirement.
4. Customized shape according to supply drawing.
5. Customized logo: We can make logo for your marine flooring.
1995-1996 MasterCraft 225 VRS EVA Foam Faux Teak Boat Deck MatteMarine Flooring Marine Boat Decking Carpet Leaf Yacht Vehicle Pad
Precautions
Please confirm your boat type before adding to the shopping cart. If you are not sure whether it meets your needs, you can contact us online or send us an email to confirm the size.
If you want to add your logo or want to add a pattern, you can send a JPG picture to our email, we will design a pattern and send it to you for confirmation, of course there will be a little extra cost that you need to pay.
Products information
Material: EVA foam
Thickness: 6mm
Hardness: 60°- 65°
Color：Teak Brown Black /Gray Black
Or if you need other colors, you can email us, we are a factory and can realize the colors you want
UV: ≥4.5G
Adhesive: 3M99786 （ Self-Adhesive Backing - No need to buy glue）
2010-2014 MALIBU Wakesetter 21 VLX Precut EVA Foam Boat Flooring Kit
Application Guide:
2010 MALIBU 21 VLX
2011 MALIBU 21 VLX
2012 MALIBU 21 VLX
2013 MALIBU 21 VLX
2014 MALIBU 21 VLX
Notes:
Please confirm your boat type before adding to cart. If you are not sure if it fits your needs, you can contact us online or send us an email to confirm the size.
If you want to add logo or pattern, you can send JPG image to our email, we will design the pattern and send it to you for confirmation, of course you need to pay extra fee.
Description:
Material: EVA foam
Texture: Brushed / Embossed (Default Brushed)
Thickness: 6mm
Hardness: 60°- 65°
UV: ≥4.5G
Adhesive: 3M99786 Self-Adhesive Backing
If you need other colors, you can email eric@hjdeck.com, we are a factory and can realize the colors you want.
For Design:
1. We can design drawings according to customers' requirements (free of charge).
2. We can provide design drawings for your choice.
3. Support LOGO customization, need file, format file: DXF/AI/PDF/JPJ/PNG, etc.
Installation Notes:
1. Before installation the floor needs to be cleaned with acetone or alcohol (to remove the wax from the surface of the new boat) and make sure it is dry before starting the installation.
2. Lay all EVA flooring flat before installation. After confirming the position, tear off the adhesive backing on one corner and start the installation.
3. Fix the adhesive and do not move the EVA flooring.
4. Use the round wheel to roll during the installation process (you need to press the 5. LOGO position with your finger in advance to avoid air entry). If there is air generated, a small needle can be used to puncture the bubble exclusion.
Note: 48 hours after installation shall not be immersed in water.
Making Templates:
If we don't have a matching boat in our sales list, please provide us with a template and we can manufacture it according to your template requirements. More details of customized templates are available:?https://www.hjdeck.com/pages/custom-features#section6
Frequently Asked Questions
HJDECK EVA flooring is designed for marine environments and provides excellent durability against water, weather, and UV exposure.
Like all outdoor materials, EVA foam may experience natural color changes over extended exposure to sunlight.
Darker colors generally provide better long-term color retention, while brighter colors such as red, orange, and yellow may show color changes more noticeably due to their pigment characteristics.
If your boat is stored outdoors or receives frequent direct sunlight exposure, we recommend choosing darker colors for maximum appearance retention.
Yes. HJDECK ships worldwide. Shipping time varies by country, product size, and season. Online tracking will be provided once your order ships.
Yes. We can customize logos, names, numbers, color combinations, groove patterns, and layout designs. Please send your logo file or design idea for review before production.
No. Most customers can install HJDECK flooring kits themselves using the included layout and marine-grade adhesive backing.
Yes. Our team can help you choose the right EVA foam thickness, color, groove pattern, and adhesive option based on your boat type and usage environment.
Yes. We work with distributors, marine installers, retailers, boat builders, and OEM partners. Please include your business type, estimated quantity, and project requirements when contacting us.
HJDECK specializes in custom EVA foam boat flooring, jet ski traction mats, and marine decking solutions for boat owners worldwide.
Contact: eric@hjdeck.com
HJDECK specializes in custom EVA foam boat flooring, jet ski traction mats, and marine decking solutions for boat owners worldwide.
Contact: eric@hjdeck.com