All

2018 Monterey 224 FSC EVA Foam Faux Teak Boat Deck MatteMarine Flooring Marine Boat Decking Pad

Notes:

Please confirm your boat type before adding to cart. If you are not sure if it fits your needs, you can contact us online or send us an email to confirm the size.

If you want to add logo or pattern, you can send JPG image to our email, we will design the pattern and send it to you for confirmation, of course you need to pay extra fee.

Description:

Material: EVA foam
Texture: Brushed / Embossed (Default Brushed)
Thickness: 6mm
Hardness: 60°- 65°
UV: ≥4.5G
Adhesive: 3M99786 (3M Self-Adhesive Backing - No need to buy glue)
If you need other colors, you can email eric@hjdeck.com, we are a factory and can realize the colors you want.

For Design:

1. We can design drawings according to customers' requirements (free of charge).

2. We can provide design drawings for your choice.

3. Support LOGO customization, need file, format file: DXF/AI/PDF/JPJ/PNG, etc.

Installation Notes:

1. Before installation the floor needs to be cleaned with acetone or alcohol (to remove the wax from the surface of the new boat) and make sure it is dry before starting the installation.
2. Lay all EVA flooring flat before installation. After confirming the position, tear off the adhesive backing on one corner and start the installation.
3. Fix the adhesive and do not move the EVA flooring.
4. Use the round wheel to roll during the installation process (you need to press the 5. LOGO position with your finger in advance to avoid air entry). If there is air generated, a small needle can be used to puncture the bubble exclusion.
Note: 48 hours after installation shall not be immersed in water.

Making Templates:

If we don't have a matching boat in our sales list, please provide us with a template and we can manufacture it according to your template requirements. More details of customized templates are available:?https://www.hjdeck.com/pages/custom-features#section6

Application Guide:

2011 Monterey 224 FS
2012 Monterey 224 FS
2013 Monterey 224 FS
2014 Monterey 224 FS
2015 Monterey 224 FS

2004 Monterey 228 SI EVA Foam Faux Teak Boat Deck MatteMarine Flooring Marine Boat Decking Pad

Notes:

Please confirm your boat type before adding to cart. If you are not sure if it fits your needs, you can contact us online or send us an email to confirm the size.

If you want to add logo or pattern, you can send JPG image to our email, we will design the pattern and send it to you for confirmation, of course you need to pay extra fee.

Description:

Material: EVA foam
Texture: Brushed / Embossed (Default Brushed)
Thickness: 6mm
Hardness: 60°- 65°
UV: ≥4.5G
Adhesive: Self-Adhesive Backing
If you need other colors, you can email eric@hjdeck.com, we are a factory and can realize the colors you want.

For Design:

1. We can design drawings according to customers' requirements (free of charge).

2. We can provide design drawings for your choice.

3. Support LOGO customization, need file, format file: DXF/AI/PDF/JPJ/PNG, etc.

Installation Notes:

1. Before installation the floor needs to be cleaned with acetone or alcohol (to remove the wax from the surface of the new boat) and make sure it is dry before starting the installation.
2. Lay all EVA flooring flat before installation. After confirming the position, tear off the adhesive backing on one corner and start the installation.
3. Fix the adhesive and do not move the EVA flooring.
4. Use the round wheel to roll during the installation process (you need to press the 5. LOGO position with your finger in advance to avoid air entry). If there is air generated, a small needle can be used to puncture the bubble exclusion.
Note: 48 hours after installation shall not be immersed in water.

Making Templates:

If we don't have a matching boat in our sales list, please provide us with a template and we can manufacture it according to your template requirements. More details of customized templates are available:?https://www.hjdeck.com/pages/custom-features#section6

2002 Monterey 228 SS EVA Foam Faux Teak Boat Deck MatteMarine Flooring Marine Boat Decking Pad

Notes:

Please confirm your boat type before adding to cart. If you are not sure if it fits your needs, you can contact us online or send us an email to confirm the size.

If you want to add logo or pattern, you can send JPG image to our email, we will design the pattern and send it to you for confirmation, of course you need to pay extra fee.

Description:

Material: EVA foam
Texture: Brushed / Embossed (Default Brushed)
Thickness: 6mm
Hardness: 60°- 65°
UV: ≥4.5G
Adhesive: Self-Adhesive Backing
If you need other colors, you can email eric@hjdeck.com, we are a factory and can realize the colors you want.

For Design:

1. We can design drawings according to customers' requirements (free of charge).

2. We can provide design drawings for your choice.

3. Support LOGO customization, need file, format file: DXF/AI/PDF/JPJ/PNG, etc.

Installation Notes:

1. Before installation the floor needs to be cleaned with acetone or alcohol (to remove the wax from the surface of the new boat) and make sure it is dry before starting the installation.
2. Lay all EVA flooring flat before installation. After confirming the position, tear off the adhesive backing on one corner and start the installation.
3. Fix the adhesive and do not move the EVA flooring.
4. Use the round wheel to roll during the installation process (you need to press the 5. LOGO position with your finger in advance to avoid air entry). If there is air generated, a small needle can be used to puncture the bubble exclusion.
Note: 48 hours after installation shall not be immersed in water.

Making Templates:

If we don't have a matching boat in our sales list, please provide us with a template and we can manufacture it according to your template requirements. More details of customized templates are available:?https://www.hjdeck.com/pages/custom-features#section6

EVA Boat Flooring Installation Roller

Achieve a smooth, secure installation with this long-handle pressure roller designed for self-adhesive EVA foam boat flooring.

The roller applies firm, even pressure across the flooring surface, helping the pressure-sensitive adhesive make consistent contact with the boat deck. Its extended handle allows you to work from a standing position, making large cockpit, bow and swim-platform installations more comfortable and efficient.

Key Features

Designed for EVA Boat Flooring: Ideal for installing self-adhesive EVA foam deck pads and precut boat flooring kits.

Firm, Even Pressure: Helps create consistent contact between the adhesive backing and the deck surface.

Long-Handle Design: Covers larger areas without requiring constant bending or kneeling.

Segmented Roller Head: Helps apply pressure across flat surfaces, panel edges and flooring seams.

Comfortable Grip: Provides better control during repeated rolling.

Reusable Installation Tool: Suitable for DIY projects and professional marine flooring installation.

Installation Tip

For the best results, roll the flooring immediately after application. Begin in the center and work toward the outer edges to help push out trapped air.

Do not pull or stretch the EVA foam during installation. Proper surface preparation, accurate alignment and even rolling pressure are all essential for reliable adhesion.

Suitable For

Precut EVA boat flooring kits

Self-adhesive marine decking

Boat cockpit flooring

Bow flooring panels

Swim-platform pads

Yacht and pontoon deck mats

RV and other self-adhesive EVA flooring projects

Package Includes

1 × Long-handle EVA flooring installation roller

Important Notice

This roller assists with pressure application but does not replace proper deck preparation. The installation surface must be clean, dry and free from wax, grease, dust, old adhesive and other contaminants before the flooring is applied.

2000 Cobalt 292 EVA Foam Deck Swim Platform Pad Boat Flooring

Important Fitment Information

Please confirm your boat’s year, make, model, and deck layout before placing your order. Boat layouts may vary even within the same model year.

If you are unsure whether this precut boat flooring kit will fit your boat, please contact us through online chat or email before ordering. We will help you verify the fitment and dimensions.

Product Specifications

Material: Marine-grade EVA foam
Thickness: 6 mm
Hardness: 60°–65°
Standard Colors: Teak Brown over Black / Gray over Black
UV Resistance: ≥4.5G
Backing: Strong self-adhesive backing
Installation: Peel and stick—no additional glue required
Custom Colors Available

Need a different color combination? Contact us by email to discuss your requirements. As a direct manufacturer, we can provide a wide selection of custom colors and combinations.

Please Note

Customized products are made according to the specifications approved by the customer. Please carefully review the fitment, dimensions, colors, logo, and design preview before confirming your order.

1998 Cobalt 293 EVA Foam Deck Swim Platform Pad Boat Flooring

Important Fitment Information

Please confirm your boat’s year, make, model, and deck layout before placing your order. Boat layouts may vary even within the same model year.

If you are unsure whether this precut boat flooring kit will fit your boat, please contact us through online chat or email before ordering. We will help you verify the fitment and dimensions.

Product Specifications

Material: Marine-grade EVA foam
Thickness: 6 mm
Hardness: 60°–65°
Standard Colors: Teak Brown over Black / Gray over Black
UV Resistance: ≥4.5G
Backing: Strong self-adhesive backing
Installation: Peel and stick—no additional glue required
Custom Colors Available

Need a different color combination? Contact us by email to discuss your requirements. As a direct manufacturer, we can provide a wide selection of custom colors and combinations.

Please Note

Customized products are made according to the specifications approved by the customer. Please carefully review the fitment, dimensions, colors, logo, and design preview before confirming your order.

1998 Cobalt 293 (Opt A) EVA Foam Deck Swim Platform Pad Boat Flooring

Important Fitment Information

Please confirm your boat’s year, make, model, and deck layout before placing your order. Boat layouts may vary even within the same model year.

If you are unsure whether this precut boat flooring kit will fit your boat, please contact us through online chat or email before ordering. We will help you verify the fitment and dimensions.

Product Specifications

Material: Marine-grade EVA foam
Thickness: 6 mm
Hardness: 60°–65°
Standard Colors: Teak Brown over Black / Gray over Black
UV Resistance: ≥4.5G
Backing: Strong self-adhesive backing
Installation: Peel and stick—no additional glue required
Custom Colors Available

Need a different color combination? Contact us by email to discuss your requirements. As a direct manufacturer, we can provide a wide selection of custom colors and combinations.

Please Note

Customized products are made according to the specifications approved by the customer. Please carefully review the fitment, dimensions, colors, logo, and design preview before confirming your order.

1998 Cobalt 293 (Opt A) EVA Foam Deck Swim Platform Pad Boat Flooring

Important Fitment Information

Please confirm your boat’s year, make, model, and deck layout before placing your order. Boat layouts may vary even within the same model year.

If you are unsure whether this precut boat flooring kit will fit your boat, please contact us through online chat or email before ordering. We will help you verify the fitment and dimensions.

Product Specifications

Material: Marine-grade EVA foam
Thickness: 6 mm
Hardness: 60°–65°
Standard Colors: Teak Brown over Black / Gray over Black
UV Resistance: ≥4.5G
Backing: Strong self-adhesive backing
Installation: Peel and stick—no additional glue required
Custom Colors Available

Need a different color combination? Contact us by email to discuss your requirements. As a direct manufacturer, we can provide a wide selection of custom colors and combinations.

Please Note

Customized products are made according to the specifications approved by the customer. Please carefully review the fitment, dimensions, colors, logo, and design preview before confirming your order.

2009 Chaparral 270 Signature EVA Foam Teak Deck Flooring Kit

Important Fitment Information

Please confirm your boat’s year, make, model, and deck layout before placing your order. Boat layouts may vary even within the same model year.

If you are unsure whether this precut boat flooring kit will fit your boat, please contact us through online chat or email before ordering. We will help you verify the fitment and dimensions.

Product Specifications

Material: Marine-grade EVA foam
Thickness: 6 mm
Hardness: 60°–65°
Standard Colors: Teak Brown over Black / Gray over Black
UV Resistance: ≥4.5G
Backing: Strong self-adhesive backing
Installation: Peel and stick—no additional glue required
Custom Colors Available

Need a different color combination? Contact us by email to discuss your requirements. As a direct manufacturer, we can provide a wide selection of custom colors and combinations.

Please Note

Customized products are made according to the specifications approved by the customer. Please carefully review the fitment, dimensions, colors, logo, and design preview before confirming your order.

2008 Cobalt 272 EVA Foam Deck Swim Platform Pad Boat Flooring

Important Fitment Information

Please confirm your boat’s year, make, model, and deck layout before placing your order. Boat layouts may vary even within the same model year.

If you are unsure whether this precut boat flooring kit will fit your boat, please contact us through online chat or email before ordering. We will help you verify the fitment and dimensions.

Product Specifications

Material: Marine-grade EVA foam
Thickness: 6 mm
Hardness: 60°–65°
Standard Colors: Teak Brown over Black / Gray over Black
UV Resistance: ≥4.5G
Backing: Strong self-adhesive backing
Installation: Peel and stick—no additional glue required
Custom Colors Available

Need a different color combination? Contact us by email to discuss your requirements. As a direct manufacturer, we can provide a wide selection of custom colors and combinations.

Please Note

Customized products are made according to the specifications approved by the customer. Please carefully review the fitment, dimensions, colors, logo, and design preview before confirming your order.