Shop

1995-1996 Sea Ray Sundancer 330 Cockpit & Swimming Platform Pad Boat Decking 6mm EVA foam Flooring

Precautions

Please confirm your boat type before adding to the shopping cart. If you are not sure whether it meets your needs, you can contact us online or send us an email to confirm the size.

If you want to add your logo or want to add a pattern, you can send a JPG picture to our email, we will design a pattern and send it to you for confirmation, of course there will be a little extra cost that you need to pay.


Products information

Material: EVA foam
Thickness: 6mm
Hardness: 60°- 65° High hardness
Color：Teak Brown Black /Gray Black
Or if you need other colors, you can email us, we are a factory and can realize the colors you want
UV: ≥4.5G
Adhesive: 3M99786 （ Self-Adhesive Backing - No need to buy glue）

For other colors and textures, please contact eric@hjdeck.com

2008 Yamaha AR230 EVA Foam Faux Teak Boat Deck MatteMarine Flooring Marine Boat Decking Carpet Yacht Pad

Precautions

Please confirm your boat type before adding to the shopping cart. If you are not sure whether it meets your needs, you can contact us online or send us an email to confirm the size.

If you want to add your logo or want to add a pattern, you can send a JPG picture to our email, we will design a pattern and send it to you for confirmation, of course there will be a little extra cost that you need to pay.


Products information

Material: EVA foam
Thickness: 6mm
Hardness: 60°- 65°
Color: Teak Brown Black /Gray Black
Or if you need other colors, you can email us, we are a factory and can realize the colors you want
UV: ≥4.5G
Adhesive: 3M99786 （ Self-Adhesive Backing - No need to buy glue）

2007 YAMAHA AR210 EVA Foam Faux Teak Boat Deck MatteMarine Flooring Marine Boat Decking Carpet Leaf Yacht Vehicle Pad

Precautions

Please confirm your boat type before adding to the shopping cart. If you are not sure whether it meets your needs, you can contact us online or send us an email to confirm the size.

If you want to add your logo or want to add a pattern, you can send a JPG picture to our email, we will design a pattern and send it to you for confirmation, of course there will be a little extra cost that you need to pay.


Products information

Material: EVA foam
Thickness: 6mm
Hardness: 60°- 65°
Color：Teak Brown Black /Gray Black
Or if you need other colors, you can email us, we are a factory and can realize the colors you want
UV: ≥4.5G
Adhesive: 3M99786 （ Self-Adhesive Backing - No need to buy glue）

1999–2000 Sea Ray 340 Sundancer EVA Foam Faux Teak Boat Deck MatteMarine Flooring Marine Boat Decking Carpet Pad

Precautions

Please confirm your boat type before adding to the shopping cart. If you are not sure whether it meets your needs, you can contact us online or send us an email to confirm the size.

If you want to add your logo or want to add a pattern, you can send a JPG picture to our email, we will design a pattern and send it to you for confirmation, of course there will be a little extra cost that you need to pay.


Products information

Material: EVA foam
Thickness: 6mm
Hardness: 60°- 65°
Color: Teak Brown Black /Gray Black
Or if you need other colors, you can email us, we are a factory and can realize the colors you want
UV: ≥4.5G
Adhesive: 3M99786 （ Self-Adhesive Backing - No need to buy glue）

2008 MOOMBA MOBIUS LSV EVA Foam Faux Teak Boat Deck MatteMarine Flooring Marine Boat Decking Carpet Yacht Pad

Application Guide:

2007 MOOMBA MOBIUS LSV
2008 MOOMBA MOBIUS LSV

Notes:

Please confirm your boat type before adding to cart. If you are not sure if it fits your needs, you can contact us online or send us an email to confirm the size.

If you want to add logo or pattern, you can send JPG image to our email, we will design the pattern and send it to you for confirmation, of course you need to pay extra fee.

Description:

Material: EVA foam
Texture: Brushed / Embossed (Default Brushed)
Thickness: 6mm
Hardness: 60°- 65°
UV: ≥4.5G
Adhesive: 3M99786 (3M Self-Adhesive Backing - No need to buy glue)
If you need other colors, you can email eric@hjdeck.com, we are a factory and can realize the colors you want.

For Design:

1. We can design drawings according to customers' requirements (free of charge).

2. We can provide design drawings for your choice.

3. Support LOGO customization, need file, format file: DXF/AI/PDF/JPJ/PNG, etc.

Installation Notes:

1. Before installation the floor needs to be cleaned with acetone or alcohol (to remove the wax from the surface of the new boat) and make sure it is dry before starting the installation.
2. Lay all EVA flooring flat before installation. After confirming the position, tear off the adhesive backing on one corner and start the installation.
3. Fix the adhesive and do not move the EVA flooring.
4. Use the round wheel to roll during the installation process (you need to press the 5. LOGO position with your finger in advance to avoid air entry). If there is air generated, a small needle can be used to puncture the bubble exclusion.
Note: 48 hours after installation shall not be immersed in water.

Making Templates:

If we don't have a matching boat in our sales list, please provide us with a template and we can manufacture it according to your template requirements. More details of customized templates are available:?https://www.hjdeck.com/pages/custom-features#section6

2015-2017 Malibu 23 LSV EVA Foam Faux Teak Boat Deck MatteMarine Flooring Marine Boat Decking Carpet Leaf Yacht Vehicle Pad

Product Specifications

• Material: Marine-grade EVA foam
• Thickness: 6 mm
• Hardness: 60°–65°
• UV Resistance: ≥4.5G
• Surface Texture: Brushed or embossed
• Backing: Marine-grade self-adhesive backing
• Installation: Peel and stick—no additional glue required

Important Before Ordering

Boat layouts can vary by production year, model version, factory options, engine configuration, or previous modifications. Please carefully compare the product’s panel layout with your boat deck before ordering.

If you are unsure about the fit, email clear photos of your complete deck to eric@hjdeck.com. Please include your boat’s exact year, full model name, and the areas you want to cover. We will help you verify the layout before production.

Please dry-fit and inspect every panel before removing the release liner, trimming the material, or permanently installing the flooring. If anything appears different from your boat layout, contact us before making modifications.

Colors, Patterns and Custom Logos

Multiple color combinations, surface textures, line styles, and engraved patterns are available. Because colors may appear different under various lighting conditions and screen settings, customers who require a specific color match should contact us before ordering.

Custom boat names, registration numbers, and logos are also available. Send your artwork in AI, DXF, PDF, SVG, PNG, or high-resolution JPG format. We will provide a design proof for approval before production. An additional fee may apply to certain custom designs and will be confirmed in advance.

Production and Delivery

Each flooring kit is custom-made after the boat layout and design details are confirmed. Standard production time is approximately 5–8 business days. Estimated shipping time after dispatch is approximately 7–15 days, depending on the destination and carrier.

Custom-Made Product Notice

This is a custom-made product manufactured according to the selected boat layout, color, pattern, and personalization options. Please review all confirmed details carefully before production begins.

If any panel arrives with permanent shipping damage or appears to have a production-related issue, do not install or modify it. Lay the affected panel flat and send us clear photos so we can review the issue and provide an appropriate solution.

Questions about fitment, colors, or customization?
Contact us at eric@hjdeck.com.

2014 Chaparral Xtreme 244 EVA Foam Faux Teak Boat Deck MatteMarine Flooring Marine Boat Decking Carpet Yacht Pad

Application Guide:

2010 Chaparral Xtreme 244
2011 Chaparral Xtreme 244
2012 Chaparral Xtreme 244
2013 Chaparral Xtreme 244
2014 Chaparral Xtreme 244
2015 Chaparral Xtreme 244

Notes:

Please confirm your boat type before adding to cart. If you are not sure if it fits your needs, you can contact us online or send us an email to confirm the size.

If you want to add logo or pattern, you can send JPG image to our email, we will design the pattern and send it to you for confirmation, of course you need to pay extra fee.

Description:

Material: EVA foam
Texture: Brushed / Embossed (Default Brushed)
Thickness: 6mm
Hardness: 60°- 65°
UV: ≥4.5G
Adhesive: 3M99786 (3M Self-Adhesive Backing - No need to buy glue)
If you need other colors, you can email eric@hjdeck.com, we are a factory and can realize the colors you want.

For Design:

1. We can design drawings according to customers' requirements (free of charge).

2. We can provide design drawings for your choice.

3. Support LOGO customization, need file, format file: DXF/AI/PDF/JPJ/PNG, etc.

Installation Notes:

1. Before installation the floor needs to be cleaned with acetone or alcohol (to remove the wax from the surface of the new boat) and make sure it is dry before starting the installation.
2. Lay all EVA flooring flat before installation. After confirming the position, tear off the adhesive backing on one corner and start the installation.
3. Fix the adhesive and do not move the EVA flooring.
4. Use the round wheel to roll during the installation process (you need to press the 5. LOGO position with your finger in advance to avoid air entry). If there is air generated, a small needle can be used to puncture the bubble exclusion.
Note: 48 hours after installation shall not be immersed in water.

Making Templates:

If we don't have a matching boat in our sales list, please provide us with a template and we can manufacture it according to your template requirements. More details of customized templates are available:?https://www.hjdeck.com/pages/custom-features#section6

2018 Chaparral H2O Sport 19 Precut EVA Foam Boat Flooring Kit

Product Specifications

• Material: Marine-grade EVA foam
• Thickness: 6 mm
• Hardness: 60°–65°
• UV Resistance: ≥4.5G
• Surface Texture: Brushed or embossed
• Backing: Marine-grade self-adhesive backing
• Installation: Peel and stick—no additional glue required

Important Before Ordering

Boat layouts can vary by production year, model version, factory options, engine configuration, or previous modifications. Please carefully compare the product’s panel layout with your boat deck before ordering.

If you are unsure about the fit, email clear photos of your complete deck to eric@hjdeck.com. Please include your boat’s exact year, full model name, and the areas you want to cover. We will help you verify the layout before production.

Please dry-fit and inspect every panel before removing the release liner, trimming the material, or permanently installing the flooring. If anything appears different from your boat layout, contact us before making modifications.

Colors, Patterns and Custom Logos

Multiple color combinations, surface textures, line styles, and engraved patterns are available. Because colors may appear different under various lighting conditions and screen settings, customers who require a specific color match should contact us before ordering.

Custom boat names, registration numbers, and logos are also available. Send your artwork in AI, DXF, PDF, SVG, PNG, or high-resolution JPG format. We will provide a design proof for approval before production. An additional fee may apply to certain custom designs and will be confirmed in advance.

Production and Delivery

Each flooring kit is custom-made after the boat layout and design details are confirmed. Standard production time is approximately 5–8 business days. Estimated shipping time after dispatch is approximately 7–15 days, depending on the destination and carrier.

Custom-Made Product Notice

This is a custom-made product manufactured according to the selected boat layout, color, pattern, and personalization options. Please review all confirmed details carefully before production begins.

If any panel arrives with permanent shipping damage or appears to have a production-related issue, do not install or modify it. Lay the affected panel flat and send us clear photos so we can review the issue and provide an appropriate solution.

Questions about fitment, colors, or customization?
Contact us at eric@hjdeck.com.

2014-2019 Chaparral 21 H2O Deluxe EVA Foam Faux Teak Boat Mat Flooring Marine Decking Carpet Pad

Precautions before payment:

• 1. Please make sure the boat model matches your yacht/boat model.
• 2. Some boat models have different configurations and options, please pay attention to choose the most suitable boat model.
• 3. If you are not sure if your boat matches the drawing, please send us photos of the swim platform and cockpit, we can help to determine the suitability.

We use the best quality Grade A EVA environmental protection material

• 1. Elastic, not easy deformation, not easy to tear.
• 2. High Density, not easy to damage. Odorless, non-toxic.
• 3. Self-adhesion, easy to installation.
• 4. Stain resistant & very easy to maintain, can also be pressure washed.
• 5. Provides a non-slippery surface for your boat in both wet & dry conditions.

Product Description:

1. Customized colors?is available.
2. Customized thickness?is available.
3. Customized size?in you requirement.
4. Customized shape?according to supply drawing.
5. Customized logo:?We can make logo for your marine traction pad.

For Design:

1. We can design drawings according to customers' requirements (free of charge).

2. We can provide design drawings for your choice.

3. Support LOGO customization, need file, format file: DXF/AI/PDF/JPJ/PNG, etc.

Making Templates:

If we don't have a matching boat in our sales list, please provide us with a template and we can manufacture it according to your template requirements. More details of customized templates are available:?https://www.hjdeck.com/pages/custom-features#section6

Production period:

Confirm the size with you after receiving the payment, start production after confirming the size, the production process usually takes about 5-12 working days (holidays postponed), we will send you the photos and ship the order after the production is completed.

The production period for orders with customized colors/templates takes about 10-25 working days to ship.

?

Installation Notes:

Before installation the floor needs to be cleaned with acetone or alcohol (to remove the wax from the surface of the new boat) and make sure it is dry before starting the installation.
Lay all EVA flooring flat before installation. After confirming the position, tear off the adhesive backing on one corner and start the installation.
Fix the adhesive and do not move the EVA flooring.
Use the round wheel to roll during the installation process (you need to press the LOGO position with your finger in advance to avoid air entry). If there is air generated, a small needle can be used to puncture the bubble exclusion.
48 hours after installation shall not be immersed in water.

Upgrade your boat with stylish and functional EVA Foam Decking from Our Designs. Our EVA foam is a high performance, cushioned decking material that feels comfortable and stable underfoot. And with its stunning good looks, it adds a clean, high-end look to your vessel.

Other:

You can choose any parts shown in the drawing to place an order, and we can provide corresponding production and sales support.

Discounts are available for repeat orders, please feel free to contact us!

Click here to contact us.

Application Guide:

2014 Chaparral 21 H20
2015 Chaparral 21 H20
2016 Chaparral 21 H20
2017 Chaparral 21 H20
2018 Chaparral 21 H20
2019 Chaparral 21 H20

2015 Bryant 210 EVA Foam Faux Teak Boat Deck MatteMarine Flooring Marine Boat Decking Carpet Leaf Yacht Vehicle Pad

Precautions

Please confirm your boat type before adding to the shopping cart. If you are not sure whether it meets your needs, you can contact us online or send us an email to confirm the size.

If you want to add your logo or want to add a pattern, you can send a JPG picture to our email, we will design a pattern and send it to you for confirmation, of course there will be a little extra cost that you need to pay.


Products information

Material: EVA foam
Thickness: 6mm
Hardness: 60°- 65°
Color：Teak Brown Black /Gray Black
Or if you need other colors, you can email us, we are a factory and can realize the colors you want
UV: ≥4.5G
Adhesive: 3M99786 （ Self-Adhesive Backing - No need to buy glue）

Application Guide:

2014 Bryant 210
2015 Bryant 210
2016 Bryant 210
2017 Bryant 210
2018 Bryant 210
2019 Bryant 210