Newest Products

2005-2007 Formula 31 PC EVA Foam Boat Flooring Cockpit Floor Pad

Precautions

Please confirm your boat type before adding to the shopping cart. If you are not sure whether it meets your needs, you can contact us online or send us an email to confirm the size.

If you want to add your logo or want to add a pattern, you can send a JPG picture to our email, we will design a pattern and send it to you for confirmation, of course there will be a little extra cost that you need to pay.


Products information

Material: EVA foam
Thickness: 6mm
Hardness: 60°- 65°
Color：Teak Brown Black /Gray Black
Or if you need other colors, you can email us, we are a factory and can realize the colors you want
UV: ≥4.5G
Adhesive: 3M99786 （ Self-Adhesive Backing - No need to buy glue）

Application Guide:

1999 Formula 31 PC
2000 Formula 31 PC
2001 Formula 31 PC
2002 Formula 31 PC
2003 Formula 31 PC
2004 Formula 31 PC

2000-2011 Rinker Captiva 262 Cuddy Swim Platform EVA Foam Faux Teak Boat Deck MatteMarine Flooring Marine Boat Decking

Notes:

Please confirm your boat type before adding to cart. If you are not sure if it fits your needs, you can contact us online or send us an email to confirm the size.

If you want to add logo or pattern, you can send JPG image to our email, we will design the pattern and send it to you for confirmation, of course you need to pay extra fee.

Description:

Material: EVA foam
Texture: Brushed / Embossed (Default Brushed)
Thickness: 6mm
Hardness: 60°- 65°
UV: ≥4.5G
Adhesive: 3M99786 (3M Self-Adhesive Backing - No need to buy glue)
If you need other colors, you can email eric@hjdeck.com, we are a factory and can realize the colors you want.

For Design:

1. We can design drawings according to customers' requirements (free of charge).

2. We can provide design drawings for your choice.

3. Support LOGO customization, need file, format file: DXF/AI/PDF/JPJ/PNG, etc.

Installation Notes:

1. Before installation the floor needs to be cleaned with acetone or alcohol (to remove the wax from the surface of the new boat) and make sure it is dry before starting the installation.
2. Lay all EVA flooring flat before installation. After confirming the position, tear off the adhesive backing on one corner and start the installation.
3. Fix the adhesive and do not move the EVA flooring.
4. Use the round wheel to roll during the installation process (you need to press the 5. LOGO position with your finger in advance to avoid air entry). If there is air generated, a small needle can be used to puncture the bubble exclusion.
Note: 48 hours after installation shall not be immersed in water.

Making Templates:

If we don't have a matching boat in our sales list, please provide us with a template and we can manufacture it according to your template requirements. More details of customized templates are available: https://www.hjdeck.com/pages/custom-features#section6

Application Guide:

2000-2011 Rinker Captiva 262 Cuddy

Hjdeck PWC Gunnel Traction Pads For For Yamaha FX, HO, SVHO, LTD 2019-2023

Notes:

Please confirm your boat type before adding to cart. If you are not sure if it fits your needs, you can contact us online or send us an email to confirm the size.

If you want to add logo or pattern, you can send JPG image to our email, we will design the pattern and send it to you for confirmation, of course you need to pay extra fee.

Description:

Material: EVA foam
Thickness: 6mm
Hardness: 60°- 65°
UV: ≥4.5G
Adhesive: 3M99786 (3M self-adhesive backing - no need to buy glue) If you need other colors, please email eric@hjdeck.com, we are a factory and can produce the color you want.

1. Customized colors is available.
2. Customized thickness is available.
3. Customized size in you requirement.
4. Customized shape according to supply drawing.
5. Customized logo: We can make logo for your marine flooring.

Application:

2019    FX HO
2019    FX Cruiser HO
2019    FX SVHO
2019    FX Cruiser SVHO
2019    FX Limted SVHO
2020    FX HO
2020    FX Cruiser HO
2020    FX SVHO
2020    FX Cruiser SVHO
2020    FX Limited SVHO
2021    FX Cruiser HO
2021    FX Crusier SVHO
2021    FX HO
2021    FX Limited SVHO
2021    FX SVHO
2022    FX Cruiser HO
2022    FX Cruiser SVHO
2022    FX Limited SVHO
2022    FX HO
2022    FX SVHO
2023    FX HO
2023    FX Cruiser HO
2023    FX Cruiser SVHO
2023    FX LimitedSVHO
2023    FX SVHO

Package: 1 Pair

Visit the Custom Features page to learn more about colors, textures, and more.

Hjdeck PWC Gunnel Traction Pads For Jet Ski Side

Notes:

Please confirm your boat type before adding to cart. If you are not sure if it fits your needs, you can contact us online or send us an email to confirm the size.

If you want to add logo or pattern, you can send JPG image to our email, we will design the pattern and send it to you for confirmation, of course you need to pay extra fee.

Description:

Material: EVA foam
Thickness: 6mm
Hardness: 60°- 65°
UV: ≥4.5G
Adhesive: 3M99786 (3M self-adhesive backing - no need to buy glue) If you need other colors, please email eric@hjdeck.com, we are a factory and can produce the color you want.

Size: 38"L x 3.86"W x 0.24"T
Applicable to: YAMAHA /Sea Doo /Kawasaki (Universal)

1. Customized colors is available.
2. Customized thickness is available.
3. Customized size in you requirement.
4. Customized shape according to supply drawing.
5. Customized logo: We can make logo for your marine flooring.

Package: 1 Pair

Visit the Custom Features page to learn more about colors, textures, and more.

Moomba LSV 2014 EVA Foam Faux Teak Boat Deck Mat Flooring Marine Decking Carpet Yacht Pad

Notes:

Please confirm your boat type before adding to cart. If you are not sure if it fits your needs, you can contact us online or send us an email to confirm the size.

If you want to add logo or pattern, you can send JPG image to our email, we will design the pattern and send it to you for confirmation, of course you need to pay extra fee.

Description:

Material: EVA foam
Texture: Brushed / Embossed (Default Brushed)
Thickness: 6mm
Hardness: 60°- 65°
UV: ≥4.5G
Adhesive: 3M99786 (3M Self-Adhesive Backing - No need to buy glue)
If you need other colors, you can email eric@hjdeck.com, we are a factory and can realize the colors you want.

For Design:

1. We can design drawings according to customers' requirements (free of charge).

2. We can provide design drawings for your choice.

3. Support LOGO customization, need file, format file: DXF/AI/PDF/JPJ/PNG, etc.

Installation Notes:

1. Before installation the floor needs to be cleaned with acetone or alcohol (to remove the wax from the surface of the new boat) and make sure it is dry before starting the installation.
2. Lay all EVA flooring flat before installation. After confirming the position, tear off the adhesive backing on one corner and start the installation.
3. Fix the adhesive and do not move the EVA flooring.
4. Use the round wheel to roll during the installation process (you need to press the 5. LOGO position with your finger in advance to avoid air entry). If there is air generated, a small needle can be used to puncture the bubble exclusion.
Note: 48 hours after installation shall not be immersed in water.

Making Templates:

If we don't have a matching boat in our sales list, please provide us with a template and we can manufacture it according to your template requirements. More details of customized templates are available: https://www.hjdeck.com/pages/custom-features#section6

Moomba Mojo 2015 EVA Foam Faux Teak Boat Deck MatteMarine Flooring Marine Boat Decking Carpet Yacht Pad

Precautions

Please confirm your boat type before adding to the shopping cart. If you are not sure whether it meets your needs, you can contact us online or send us an email to confirm the size.

If you want to add your logo or want to add a pattern, you can send a JPG picture to our email, we will design a pattern and send it to you for confirmation, of course there will be a little extra cost that you need to pay.


Products information

Material: EVA foam
Thickness: 6mm
Hardness: 60°- 65°
Color: Teak Brown Black /Gray Black
Or if you need other colors, you can email us, we are a factory and can realize the colors you want
UV: ≥4.5G
Adhesive: 3M99786 （ Self-Adhesive Backing - No need to buy glue）

MB Sports  F22 Tomcat 2019 Custom Foam Boat Flooring Cockpit & Swim Platform Mat

Precautions before payment:

• 1. Please make sure the boat model matches your yacht/boat model.
• 2. Some boat models have different configurations and options, please pay attention to choose the most suitable boat model.
• 3. If you are not sure if your boat matches the drawing, please send us photos of the swim platform and cockpit, we can help to determine the suitability.

Upgrade your boat with stylish and functional EVA Foam Decking from Our Designs. Our EVA foam is a high performance, cushioned decking material that feels comfortable and stable underfoot. And with its stunning good looks, it adds a clean, high-end look to your vessel.

We use the best quality Grade A EVA environmental protection material

• 1. Elastic, not easy deformation, not easy to tear.
• 2. High Density, not easy to damage. Odorless, non-toxic.
• 3. Self-adhesion, easy to installation.
• 4. Stain resistant & very easy to maintain, can also be pressure washed.
• 5. Provides a non-slippery surface for your boat in both wet & dry conditions.

Product Description:

1. Customized colors is available.
2. Customized thickness is available.
3. Customized size in you requirement.
4. Customized shape according to supply drawing.
5. Customized logo: We can make logo for your marine traction pad.

Application Guide:

2015 MB Sports F22 Tomcat
2016 MB Sports F22 Tomcat

For Design:

1. We can design drawings according to customers' requirements (free of charge).

2. We can provide design drawings for your choice.

3. Support LOGO customization, need file, format file: DXF/AI/PDF/JPJ/PNG, etc.

Installation Notes:

Before installation the floor needs to be cleaned with acetone or alcohol (to remove the wax from the surface of the new boat) and make sure it is dry before starting the installation.
Lay all EVA flooring flat before installation. After confirming the position, tear off the adhesive backing on one corner and start the installation.
Fix the adhesive and do not move the EVA flooring.
Use the round wheel to roll during the installation process (you need to press the LOGO position with your finger in advance to avoid air entry). If there is air generated, a small needle can be used to puncture the bubble exclusion.
48 hours after installation shall not be immersed in water.

Making Templates:

If we don't have a matching boat in our sales list, please provide us with a template and we can manufacture it according to your template requirements. More details of customized templates are available: https://www.hjdeck.com/pages/custom-features#section6

Production period:

Confirm the size with you after receiving the payment, start production after confirming the size, the production process usually takes about 5-12 working days (holidays postponed), we will send you the photos and ship the order after the production is completed.

The production period for orders with customized colors/templates takes about 10-25 working days to ship.

Other:

You can choose any parts shown in the drawing to place an order, and we can provide corresponding production and sales support.

Discounts are available for repeat orders, please feel free to contact us!

Click here to contact us.

2011 23 LSV Boat Swim Deck Pads 6mm EVA Foam Boat Decking

EVA Material Properties:

1. EVA material is a high-density sponge that does not absorb moisture, making it resistant to water damage and mold growth.

2. EVA material is known for its soft and comfortable texture, offering a pleasant tactile experience and enhancing user comfort.

3. It is easy to maintain EVA material by using common cleaning agents. It can be easily cleaned by rinsing with a brush and water, ensuring hassle-free upkeep.

4. EVA material exhibits high and low temperature resistance, allowing it to withstand extreme weather conditions and maintain its performance and integrity.

5. With excellent sound insulation and anti-vibration properties, EVA material helps reduce noise transmission and vibrations, creating a quieter and more comfortable environment.

6. EVA material is easy to replace and install, requiring no additional auxiliary materials. Its versatility and simplicity make it a convenient choice for various applications.

Precautions before payment:

1. Please make sure the boat model matches your yacht/boat model.

2. Some boat models have different configurations and options, please pay attention to choose the most suitable boat model.

3. If you are not sure if your boat matches the drawing, please send us photos of the swim platform and cockpit, we can help to determine the suitability.

Products information

Material: EVA foam
Thickness: 6mm
Hardness: 60°- 65° 
Color: Brown Black /Gray Black
Or if you need other colors, you can email us, we are a factory and can realize the colors you want
UV: ≥4.5G (UV resistant without color fading)
Adhesive: 3M99786 (Self-Adhesive Backing - No need to buy glue)
Support for customized services (Colors, Patterns, Logo, etc)

For Design:

1. We can design drawings according to customers' requirements (free of charge).

2. We can provide design drawings for your choice.

3. Support LOGO customization, need file, format file: DXF/AI/PDF/JPJ/PNG, etc.

Installation Notes:

1. Before installation the floor needs to be cleaned with acetone or alcohol (to remove the wax from the surface of the new boat) and make sure it is dry before starting the installation.

2. Lay all EVA flooring flat before installation. After confirming the position, tear off the adhesive backing on one corner and start the installation.

3. Fix the adhesive and do not move the EVA flooring.

4. Use the round wheel to roll during the installation process (you need to press the LOGO position with your finger in advance to avoid air entry). If there is air generated, a small needle can be used to puncture the bubble exclusion.

5. 48 hours after installation shall not be immersed in water.

Making Templates:

If we don't have a matching boat in our sales list, please provide us with a template and we can manufacture it according to your template requirements. More details of customized templates are available: https://www.hjdeck.com/pages/custom-features#section6

Production period:

Confirm the size with you after receiving the payment, start production after confirming the size, the production process usually takes about 5-12 working days (holidays postponed), we will send you the photos and ship the order after the production is completed.

The production period for orders with customized colors/templates takes about 15-25 working days to ship.

Other:

You can choose any parts shown in the drawing to place an order, and we can provide corresponding production and sales support.

Discounts are available for repeat orders, please feel free to contact us!

Please feel free to contact us for any other questions/issues! Email: Eric@hjdeck.com

Dimensions: 36" x 14" / 39" x 15.75"
Material Thickness: 13mm
Texture: Brushed / Embosssed
Hardness: 50°- 55°
Adhesive: 3M99786
Warranty: 1 year
Color: Brown /Black

13mm low-density base material for ultimate comfort
Features Sea Hunt logo
Teak routing design

Designed for skippers who demand durability and precision, the Rudder Mat redefines comfort on the water. With its 13mm marine-grade construction, it's more than just a Mat, it's your steadfast ally against fatigue, slippery surfaces and harsh ocean conditions.

Notes:

If you want to add logo or pattern, you can send JPG image to our email, we will design the pattern and send it to you for confirmation, of course you need to pay extra fee.

1. Customized colors is available.
2. Customized thickness is available.
3. Customized size in you requirement.
4. Customized shape according to supply drawing.
5. Customized logo: We can make logo for your marine flooring.

Production Time:

Production typically takes 3-5 business days. Customization with colors, patterns, and logos takes 5-7 business days.

Delivery to most countries typically takes 1-2 weeks after shipment.

Superior 3M 9786 Adhesive: Hjdeck marine flooring features original 3M 9786 marine-grade adhesive that maintains strong adhesion in extreme cold weather of -40 degrees Fahrenheit and high temperatures of 150 degrees Fahrenheit, outlasting standard mats in harsh conditions. Anti-scratch design protects metal, fiberglass decks, and other smooth, glossy surfaces.

Double-layer 6mm high-density EVA: Made with marine-grade EVA foam, our double-layer construction offers superior heat, water, and UV resistance, as well as tear-resistant durability that won't shrink even in harsh environments. Reduces surface scratches and footstep noise while providing a soft, non-slip surface perfect for bare feet.

DIY Installation: Detailed cutting instructions are included, and can be easily cut to fit your boat layout using scissors or a utility knife. With 3M adhesive, peel and stick to ensure a secure, durable grip on floors, decks, or anywhere grip and protection is needed.

Easy Maintenance: Closed-cell non-absorbent technology effectively blocks liquid penetration and quickly removes stains; grooved surface enhances drainage and allows for easy high-pressure cleaning. Keep your boat green and clean all year round.

Universal Marine Applicability: Suitable for fishing boats, sailboats, water ski boats, yachts, private bathroom boats, etc. Hjdeck provides a 12-month worry-free warranty and exclusive customer support, upgrade your marine flooring today for lasting performance and comfort!