Newest Products

2016-2017 Sea-Doo GTX Limited 300 Jet Ski Traction Mats EVA Foam Boat Flooring Kits

Application Guide:

2016-2017 Sea-Doo GTX 155
2016 Sea-Doo GTX Limited 215
2016-2017 Sea-Doo GTX Limited 300
2017 Sea-Doo GTX Limited 230
2016-2017 Sea-Doo RXT 260
2016 Sea-Doo Wake Pro 215
2017 Sea-Doo Wake Pro 230

Notes:

Please confirm your boat type before adding to cart. If you are not sure if it fits your needs, you can contact us online or send us an email to confirm the size.

If you want to add logo or pattern, you can send JPG image to our email, we will design the pattern and send it to you for confirmation, of course you need to pay extra fee.

Description:

Material: EVA foam
Texture: Brushed / Embossed (Default Brushed)
Thickness: 6mm
UV: ≥4.5G
Adhesive: 3M99786 (3M Self-Adhesive Backing - No need to buy glue)
If you need other colors, you can email eric@hjdeck.com, we are a factory and can realize the colors you want.

For Design:

1. We can design drawings according to customers' requirements (free of charge).

2. We can provide design drawings for your choice.

3. Support LOGO customization, need file, format file: DXF/AI/PDF/JPJ/PNG, etc.

Installation Notes:

1. Before installation the floor needs to be cleaned with acetone or alcohol (to remove the wax from the surface of the new boat) and make sure it is dry before starting the installation.
2. Lay all EVA flooring flat before installation. After confirming the position, tear off the adhesive backing on one corner and start the installation.
3. Fix the adhesive and do not move the EVA flooring.
4. Use the round wheel to roll during the installation process (you need to press the 5. LOGO position with your finger in advance to avoid air entry). If there is air generated, a small needle can be used to puncture the bubble exclusion.
Note: 48 hours after installation shall not be immersed in water.

Making Templates:

If we don't have a matching boat in our sales list, please provide us with a template and we can manufacture it according to your template requirements. More details of customized templates are available:?https://www.hjdeck.com/pages/custom-features#section6

Specification:

3 Piece Cut
Unidirectional Nose - Tail Diamond Groove Pattern
25mm 45/90 Contoured Tail Kick
8mm Low Oval Arch
11.5" Wide x 14" Long
6" Wide at Tail

Features:

Made from lightweight thermoformed EVA foam, the Hjdeck features a three-piece design with perforated points and clear channels to reduce weight. Its ultra-thin design gives you maximum board feel in turns, allowing you to feel more in control and connected to the board.

MAXIMUM CONTROL AND COMFORT - Push the limits for maximum speed and power by turning the tail into a pliable double side channel grip sweet spot that you can ride confidently and comfortably on your wakeboard, skateboard, kiteboard or wakeboard.

TECHNICAL KICKS - Surf kicks are 45 degrees to the vertical to lock your feet in place and minimize falls.The beveled edges on the 28mm high surf kick pads reduce drag and increase speed, perfect for all types of waves.

Fits all surfboards - Surf Traction Pad is 12 inches wide x 12 inches high x 5 millimeters thick with an additional 8 millimeter arch. Can be used as a traction pad for wakeboards or fish, or as a grip pad for any longboard or surfboard.

GUARANTEED GRIP - Ultra-strong 3M green adhesive permanently bonds to surfboards with just the right amount of prep work. Designed by two professional surfers in California who stand behind their product. If your surfboard or skateboard is not working for any reason, drop us a line and we'll take care of you. Let's surf together!

HJDeck Coaming Bolster Set (Qty. 2) – 20mm Embossed (4” x 39”)

Upgrade your boat with HJDeck's premium coaming mat set, designed for durability, comfort, and style.

Each set includes two 4" x 39" mats made from high-performance 20mm thick closed-cell PE/EVA foam with a versatile gray embossed texture.

Specifications:

Dimensions: Each coaming measures 4" (W) x 39" (L)
Material Thickness: 20mm (0.8")
Texture: Embossed non-slip finish
Color: Gray /Black (weather-resistant pigment)
Contains: 2 coamings per set

Installation Tip: Before installation, ensure the surface is clean, dry, and free of debris for optimal adhesion.

Product Features:

Perfectly matched to Sea Hunt boats

Upgrade your cockpit with our premium EVA/PE foam dashboard pad, precisely molded to the contours of Sea Hunt boat models.

Superior Marine-Grade Protection

Made from dual-density closed-cell EVA/PE foam, this dashboard pad offers shock-absorbing, UV-resistant, and water-resistant durability. It withstands harsh marine conditions, prevents slipping, and protects the dashboard from wear and tear.

Smart Storage for Your Essentials

Features a built-in pocket with a protective bumper for securely storing your phone, sunglasses, and small gear. The non-slip design prevents items from sliding, even in rough seas.

Quick and Easy Installation

No tools required; simply peel and stick with the high-strength 3M adhesive backing. No modifications required, making installation easy.

Stylish and Durable Design

Available in gray/black and teak/black colors to complement your boat's interior. Combining OEM-quality craftsmanship with rugged performance.

Trusted OEM Supplier

Crafted by HJDeck, a leading manufacturer of marine-grade EVA/PE foam solutions, this dashboard mat offers tailor-made options.

Ideal for Sea Hunt boat owners seeking a custom-fit dashboard mat for enhanced protection, storage, and style.

Specitifications:

Thickness: 5/8 inches
Color: Grey /Brown (Support Customized)
Material: EVA/PE Foam
Adhesive: 3M adhesive
Texture: Brushed /Embossed

2021-2025 Yamaha VX-C, VX CRUISER/HO/DELUXE Jet Ski Traction Mats

Application:

2021-2025 Yamaha VX (TR-1)
2021-2025 Yamaha VX Cruiser (TR-1)
2021-2025 Yamaha VX Deluxe (TR-1)
2021-2025 Yamaha VX Limited (TR-1)
2021-2025 Yamaha VX-C (TR-1)
2021-2023 Yamaha VX Cruiser HO (1.8L)
2024-2025 Yamaha VX Cruiser HO (1.9L)
2021-2023 Yamaha VX Limited HO (1.8L)
2024-2025 Yamaha VX Limited HO (1.9L)

Product Description:

1. Customized colors is available.
2. Customized thickness is available.
3. Customized size in you requirement.
4. Customized shape according to supply drawing.
5. Customized logo: We can make logo for your marine traction pad.

Click here to contact us.

Hjdeck PWC Gunnel Traction Pads For For Yamaha FX, HO, SVHO, LTD 2019-2023

Notes:

Please confirm your boat type before adding to cart. If you are not sure if it fits your needs, you can contact us online or send us an email to confirm the size.

If you want to add logo or pattern, you can send JPG image to our email, we will design the pattern and send it to you for confirmation, of course you need to pay extra fee.

Description:

Material: EVA foam
Thickness: 6mm
Hardness: 60°- 65°
UV: ≥4.5G
Adhesive: 3M99786 (3M self-adhesive backing - no need to buy glue) If you need other colors, please email eric@hjdeck.com, we are a factory and can produce the color you want.

1. Customized colors is available.
2. Customized thickness is available.
3. Customized size in you requirement.
4. Customized shape according to supply drawing.
5. Customized logo: We can make logo for your marine flooring.

Package: 1 Pair

Visit the Custom Features page to learn more about colors, textures, and more.

2009 Chaparral 244 Sunesta EVA Foam Faux Teak Boat Deck MatteMarine Flooring Marine Boat Decking Carpet Leaf Yacht Vehicle Pad

Application Guide:

2008 Chaparral 244 Sunesta
2009 Chaparral 244 Sunesta

Notes:

Please confirm your boat type before adding to cart. If you are not sure if it fits your needs, you can contact us online or send us an email to confirm the size.

If you want to add logo or pattern, you can send JPG image to our email, we will design the pattern and send it to you for confirmation, of course you need to pay extra fee.

Description:

Material: EVA foam
Texture: Brushed / Embossed (Default Brushed)
Thickness: 6mm
Hardness: 60°- 65°
UV: ≥4.5G
Adhesive: 3M99786 (3M Self-Adhesive Backing - No need to buy glue)
If you need other colors, you can email eric@hjdeck.com, we are a factory and can realize the colors you want.

For Design:

1. We can design drawings according to customers' requirements (free of charge).

2. We can provide design drawings for your choice.

3. Support LOGO customization, need file, format file: DXF/AI/PDF/JPJ/PNG, etc.

Installation Notes:

1. Before installation the floor needs to be cleaned with acetone or alcohol (to remove the wax from the surface of the new boat) and make sure it is dry before starting the installation.
2. Lay all EVA flooring flat before installation. After confirming the position, tear off the adhesive backing on one corner and start the installation.
3. Fix the adhesive and do not move the EVA flooring.
4. Use the round wheel to roll during the installation process (you need to press the 5. LOGO position with your finger in advance to avoid air entry). If there is air generated, a small needle can be used to puncture the bubble exclusion.
Note: 48 hours after installation shall not be immersed in water.

Making Templates:

If we don't have a matching boat in our sales list, please provide us with a template and we can manufacture it according to your template requirements. More details of customized templates are available:?https://www.hjdeck.com/pages/custom-features#section6

2015 Rinker Captiva 196?Swim Platform EVA Foam Faux Teak Boat Deck MatteMarine Flooring Marine Boat Decking

Notes:

Please confirm your boat type before adding to cart. If you are not sure if it fits your needs, you can contact us online or send us an email to confirm the size.

If you want to add logo or pattern, you can send JPG image to our email, we will design the pattern and send it to you for confirmation, of course you need to pay extra fee.

Description:

Material: EVA foam
Texture: Brushed / Embossed (Default Brushed)
Thickness: 6mm
Hardness: 60°- 65°
UV: ≥4.5G
Adhesive: 3M99786 (3M Self-Adhesive Backing - No need to buy glue)
If you need other colors, you can email eric@hjdeck.com, we are a factory and can realize the colors you want.

For Design:

1. We can design drawings according to customers' requirements (free of charge).

2. We can provide design drawings for your choice.

3. Support LOGO customization, need file, format file: DXF/AI/PDF/JPJ/PNG, etc.

Installation Notes:

1. Before installation the floor needs to be cleaned with acetone or alcohol (to remove the wax from the surface of the new boat) and make sure it is dry before starting the installation.
2. Lay all EVA flooring flat before installation. After confirming the position, tear off the adhesive backing on one corner and start the installation.
3. Fix the adhesive and do not move the EVA flooring.
4. Use the round wheel to roll during the installation process (you need to press the 5. LOGO position with your finger in advance to avoid air entry). If there is air generated, a small needle can be used to puncture the bubble exclusion.
Note: 48 hours after installation shall not be immersed in water.

Making Templates:

If we don't have a matching boat in our sales list, please provide us with a template and we can manufacture it according to your template requirements. More details of customized templates are available:?https://www.hjdeck.com/pages/custom-features#section6

Application Guide:

2000-2011 Rinker Captiva 262 Cuddy

2013 Mastercraft X10?EVA Foam Faux Teak Boat Deck MatteMarine Flooring Marine Boat Decking Pad

Precautions

Please confirm your boat type before adding to the shopping cart. If you are not sure whether it meets your needs, you can contact us online or send us an email to confirm the size.

If you want to add your logo or want to add a pattern, you can send a JPG picture to our email, we will design a pattern and send it to you for confirmation, of course there will be a little extra cost that you need to pay.


Products information

Material:EVA foam
Thickness:6mm
Hardness: 60°- 65°
Color：Teak Brown Black /Gray Black
Or if you need other colors, you can email us, we are a factory and can realize the colors you want
UV: ≥4.5G
Adhesive:3M99786 （ Self-Adhesive Backing - No need to buy glue）

2014-2018 Monterey 268 SS EVA Foam Faux Teak Boat Deck Mat Flooring Marine Boat Decking Pad

Application Guide:

2014 Monterey 268 SS
2015 Monterey 268 SS
2016 Monterey 268 SS
2017 Monterey 268 SS
2018 Monterey 268 SS

Notes:

Please confirm your boat type before adding to cart. If you are not sure if it fits your needs, you can contact us online or send us an email to confirm the size.

If you want to add logo or pattern, you can send JPG image to our email, we will design the pattern and send it to you for confirmation, of course you need to pay extra fee.

Description:

Material: EVA foam
Texture: Brushed / Embossed (Default Brushed)
Thickness: 6mm
Hardness: 60°- 65°
UV: ≥4.5G
Adhesive: 3M99786 (3M Self-Adhesive Backing - No need to buy glue)
If you need other colors, you can email eric@hjdeck.com, we are a factory and can realize the colors you want.

For Design:

1. We can design drawings according to customers' requirements (free of charge).

2. We can provide design drawings for your choice.

3. Support LOGO customization, need file, format file: DXF/AI/PDF/JPJ/PNG, etc.

Installation Notes:

1. Before installation the floor needs to be cleaned with acetone or alcohol (to remove the wax from the surface of the new boat) and make sure it is dry before starting the installation.
2. Lay all EVA flooring flat before installation. After confirming the position, tear off the adhesive backing on one corner and start the installation.
3. Fix the adhesive and do not move the EVA flooring.
4. Use the round wheel to roll during the installation process (you need to press the 5. LOGO position with your finger in advance to avoid air entry). If there is air generated, a small needle can be used to puncture the bubble exclusion.
Note: 48 hours after installation shall not be immersed in water.

Making Templates:

If we don't have a matching boat in our sales list, please provide us with a template and we can manufacture it according to your template requirements. More details of customized templates are available:?https://www.hjdeck.com/pages/custom-features#section6