Shop

Boat Flooring EVA Foam Brushed Texture Boat Decking Sheet - High Hardness

Make your boat look more luxurious; if you are a boat owner, you must have a place for EVA decking carpet; we have a variety of colors and sizes to choose from. Pick one now!

This EVA Foam Decking Sheet uses an EVA foaming material which has the advantages of good cushioning, shock resistance, heat insulation, non-skid, salt waterproof, moisture resistance, and chemical corrosion resistance. High tensile elongation, not easy deformation, not easy to tear or damage, it is safe and durable. So take away the pain from standing on the stern deck of your boat with this comfortable soft boat floor deck.

Good looking and easy to maintain. It can easily be cut down with a sharp razor knife to fit nearly any surface on a boat where non-skid or protection for the boat's surface is required.

Our EVA foam boat flooring can be easily washed with a vacuum cleaner or pressure. It is natural and comfortable. Tips: There is a little color difference in different directions of the product. Please confirm that the order of the product is the same before installation.

EVA Foam Decking Sheet has wide applications such as Boat flooring, RV flooring, Swimming Pool flooring, Garden flooring, RV flooring, Kayak Yacht Decking, etc. If you need samples or want to customize the mats, please get in touch with us directly.

Specification

Material: EVA Foam
Texture: Brushed texture
Color: Two color
Hardness: 60-65°
Thickness: 6mm
Installation: Self-adhesive on the floor
Product size: 94.5"x45.2"

2007 Malibu 21 LSV Swim Platform EVA Foam Boat Deck Mat

Product Specifications

• Material: Marine-grade EVA foam
• Thickness: 6 mm
• Hardness: 60°–65°
• UV Resistance: ≥4.5G
• Surface Texture: Brushed or embossed
• Backing: Marine-grade self-adhesive backing
• Installation: Peel and stick—no additional glue required

Important Before Ordering

Boat layouts can vary by production year, model version, factory options, engine configuration, or previous modifications. Please carefully compare the product’s panel layout with your boat deck before ordering.

If you are unsure about the fit, email clear photos of your complete deck to eric@hjdeck.com. Please include your boat’s exact year, full model name, and the areas you want to cover. We will help you verify the layout before production.

Please dry-fit and inspect every panel before removing the release liner, trimming the material, or permanently installing the flooring. If anything appears different from your boat layout, contact us before making modifications.

Colors, Patterns and Custom Logos

Multiple color combinations, surface textures, line styles, and engraved patterns are available. Because colors may appear different under various lighting conditions and screen settings, customers who require a specific color match should contact us before ordering.

Custom boat names, registration numbers, and logos are also available. Send your artwork in AI, DXF, PDF, SVG, PNG, or high-resolution JPG format. We will provide a design proof for approval before production. An additional fee may apply to certain custom designs and will be confirmed in advance.

Production and Delivery

Each flooring kit is custom-made after the boat layout and design details are confirmed. Standard production time is approximately 5–8 business days. Estimated shipping time after dispatch is approximately 7–15 days, depending on the destination and carrier.

Custom-Made Product Notice

This is a custom-made product manufactured according to the selected boat layout, color, pattern, and personalization options. Please review all confirmed details carefully before production begins.

If any panel arrives with permanent shipping damage or appears to have a production-related issue, do not install or modify it. Lay the affected panel flat and send us clear photos so we can review the issue and provide an appropriate solution.

Questions about fitment, colors, or customization?
Contact us at eric@hjdeck.com.

2008 Malibu 20 VTX Boat Swim Deck Pads 6mm EVA Foam Boat Decking

EVA Material Properties:

1. EVA material is a high-density sponge that does not absorb moisture, making it resistant to water damage and mold growth.

2. EVA material is known for its soft and comfortable texture, offering a pleasant tactile experience and enhancing user comfort.

3. It is easy to maintain EVA material by using common cleaning agents. It can be easily cleaned by rinsing with a brush and water, ensuring hassle-free upkeep.

4. EVA material exhibits high and low temperature resistance, allowing it to withstand extreme weather conditions and maintain its performance and integrity.

5. With excellent sound insulation and anti-vibration properties, EVA material helps reduce noise transmission and vibrations, creating a quieter and more comfortable environment.

6. EVA material is easy to replace and install, requiring no additional auxiliary materials. Its versatility and simplicity make it a convenient choice for various applications.

Precautions before payment:

1. Please make sure the boat model matches your yacht/boat model.

2. Some boat models have different configurations and options, please pay attention to choose the most suitable boat model.

3. If you are not sure if your boat matches the drawing, please send us photos of the swim platform and cockpit, we can help to determine the suitability.

Products information

Material: EVA foam
Thickness: 6mm
Hardness: 60°- 65°?
Color: Brown Black /Gray Black
Or if you need other colors, you can email us, we are a factory and can realize the colors you want
UV: ≥4.5G (UV resistant without color fading)
Adhesive: 3M99786 (Self-Adhesive Backing - No need to buy glue)
Support for customized services (Colors, Patterns, Logo, etc)

For Design:

1. We can design drawings according to customers' requirements (free of charge).

2. We can provide design drawings for your choice.

3. Support LOGO customization, need file, format file: DXF/AI/PDF/JPJ/PNG, etc.

Installation Notes:

1. Before installation the floor needs to be cleaned with acetone or alcohol (to remove the wax from the surface of the new boat) and make sure it is dry before starting the installation.

2. Lay all EVA flooring flat before installation. After confirming the position, tear off the adhesive backing on one corner and start the installation.

3. Fix the adhesive and do not move the EVA flooring.

4. Use the round wheel to roll during the installation process (you need to press the LOGO position with your finger in advance to avoid air entry). If there is air generated, a small needle can be used to puncture the bubble exclusion.

5. 48 hours after installation shall not be immersed in water.

Making Templates:

If we don't have a matching boat in our sales list, please provide us with a template and we can manufacture it according to your template requirements. More details of customized templates are available: https://www.hjdeck.com/pages/custom-features#section6

Production period:

Confirm the size with you after receiving the payment, start production after confirming the size, the production process usually takes about 5-12 working days (holidays postponed), we will send you the photos and ship the order after the production is completed.

The production period for orders with customized colors/templates takes about 15-25 working days to ship.

Other:

You can choose any parts shown in the drawing to place an order, and we can provide corresponding production and sales support.

Discounts are available for repeat orders, please feel free to contact us!

Please feel free to contact us for any other questions/issues! Email: Eric@hjdeck.com

Dimensions: Custom
Material Thickness: 6mm /13mm
Texture: Brushed /Embossed
Color: Brown/Black
Teak routing design

Designed for skippers who demand durability and precision, the Rudder Mat redefines comfort on the water. With its 16mm marine-grade construction, it's more than just a Mat, it's your steadfast ally against fatigue, slippery surfaces and harsh ocean conditions.

How To Install

Please see this page for installation: How to Install Hjdeck

Cleaning Tips:

Act fast to clean spills and avoid stains. Common culprits like ketchup, mustard, rusted fishhooks, fish blood, and bird droppings can leave marks if not wiped up promptly.

For general dirt and stains:

Use an all-purpose cleaner ?mixed with warm water.

Scrub with a medium-bristle deck brush in circular motions.

Rinse thoroughly with clean water.

For tough stains like fish blood:

Combine 1 cup bleach with 1 gallon of warm water.

Scrub the affected area until the stain lifts.

Repeat if necessary.

Avoid: Harsh chemicals like mineral spirits, which can damage the decking.

Maintenance Advice:

Don’t leave items (pool toys, tools, water bottles) sitting on the deck for long periods.

Keep reflective surfaces (glass, mirrors) away—they can focus sunlight and cause damage.

When not in use, cover or store the decking to protect it from prolonged sun exposure and extend its lifespan.

Dimensions: Custom
Material Thickness: 6mm /13mm
Texture: Brushed /Embossed
Color: Brown/Black
Teak routing design

Designed for skippers who demand durability and precision, the Rudder Mat redefines comfort on the water. With its 16mm marine-grade construction, it's more than just a Mat, it's your steadfast ally against fatigue, slippery surfaces and harsh ocean conditions.

How To Install

Please see this page for installation: How to Install Hjdeck

Cleaning Tips:

Act fast to clean spills and avoid stains. Common culprits like ketchup, mustard, rusted fishhooks, fish blood, and bird droppings can leave marks if not wiped up promptly.

For general dirt and stains:

Use an all-purpose cleaner ?mixed with warm water.

Scrub with a medium-bristle deck brush in circular motions.

Rinse thoroughly with clean water.

For tough stains like fish blood:

Combine 1 cup bleach with 1 gallon of warm water.

Scrub the affected area until the stain lifts.

Repeat if necessary.

Avoid: Harsh chemicals like mineral spirits, which can damage the decking.

Maintenance Advice:

Don’t leave items (pool toys, tools, water bottles) sitting on the deck for long periods.

Keep reflective surfaces (glass, mirrors) away—they can focus sunlight and cause damage.

When not in use, cover or store the decking to protect it from prolonged sun exposure and extend its lifespan.

2008 Sea Ray 270 SLX EVA Foam Faux Teak Boat Deck MatteMarine Flooring Marine Boat Decking Carpet Leaf Yacht Vehicle Pad

Precautions

Please confirm your boat type before adding to the shopping cart. If you are not sure whether it meets your needs, you can contact us online or send us an email to confirm the size.

If you want to add your logo or want to add a pattern, you can send a JPG picture to our email, we will design a pattern and send it to you for confirmation, of course there will be a little extra cost that you need to pay.


Products information

Material: EVA foam
Thickness: 6mm
Hardness: 60°- 65°
Color：Teak Brown Black /Gray Black
Or if you need other colors, you can email us, we are a factory and can realize the colors you want
UV: ≥4.5G
Adhesive: 3M99786 (Self-Adhesive Backing - No need to buy glue)

2015 Sea Ray 270 SLX EVA Foam Faux Teak Boat Deck MatteMarine Flooring Marine Boat Decking Carpet Leaf Yacht Vehicle Pad

Precautions

Please confirm your boat type before adding to the shopping cart. If you are not sure whether it meets your needs, you can contact us online or send us an email to confirm the size.

If you want to add your logo or want to add a pattern, you can send a JPG picture to our email, we will design a pattern and send it to you for confirmation, of course there will be a little extra cost that you need to pay.


Products information

Material: EVA foam
Thickness: 6mm
Hardness: 60°- 65°
Color：Teak Brown Black /Gray Black
Or if you need other colors, you can email us, we are a factory and can realize the colors you want
UV: ≥4.5G
Adhesive: 3M99786 (Self-Adhesive Backing - No need to buy glue)

Sea-Doo 4.2 Gal (16 L) LinQ Cooler Non-Skid Traction Pad Top Cover

Description

Material thickness: 6 mm
Texture: Brushed / Faux Teak / Custom
Pattern: Support customization
Color: Various colors available

Adhesive: Self-adhesive backing

Do not attempt to retrofit to other coolers. If you need custom cutting or custom design, please contact us.

Hjdeck / 6mm / Dual Layer
Easy to Install / Peel and Stick / Pressure Sensitive Adhesive / UV Resistant / CNC Routed

( THIS IS A HJDECK PAD ONLY - COOLER IS NOT INCLUDED! )

2007-2010 Nautique 210 Super Air EVA Foam Faux Teak Boat Decking Mats Marine Flooring

Notes:

Please confirm your boat type before adding to cart. If you are not sure if it fits your needs, you can contact us online or send us an email to confirm the size.

If you want to add logo or pattern, you can send JPG image to our email, we will design the pattern and send it to you for confirmation, of course you need to pay extra fee.

Description:

Material: EVA foam
Thickness: 6mm
Hardness: 60°- 65°
UV: ≥4.5G
Adhesive: 3M99786 (3M Self-Adhesive Backing - No need to buy glue)
If you need other colors, you can email eric@hjdeck.com, we are a factory and can realize the colors you want.

1. Customized colors is available.
2. Customized thickness is available.
3. Customized size in you requirement.
4. Customized shape according to supply drawing.
5. Customized logo: We can make logo for your marine flooring.

2005 Monterey montura 248 LSC EVA Foam Faux Teak Boat Deck MatteMarine Flooring Marine Boat Decking Pad

Notes:

Please confirm your boat type before adding to cart. If you are not sure if it fits your needs, you can contact us online or send us an email to confirm the size.

If you want to add logo or pattern, you can send JPG image to our email, we will design the pattern and send it to you for confirmation, of course you need to pay extra fee.

Description:

Material: EVA foam
Texture: Brushed / Embossed (Default Brushed)
Thickness: 6mm
Hardness: 60°- 65°
UV: ≥4.5G
Adhesive: 3M99786 (3M Self-Adhesive Backing - No need to buy glue)
If you need other colors, you can email eric@hjdeck.com, we are a factory and can realize the colors you want.

Application:

2005 Monterey 248 LSC Montura

2005 Monterey montura 248 LSC

For Design:

1. We can design drawings according to customers' requirements (free of charge).

2. We can provide design drawings for your choice.

3. Support LOGO customization, need file, format file: DXF/AI/PDF/JPJ/PNG, etc.

Installation Notes:

1. Before installation the floor needs to be cleaned with acetone or alcohol (to remove the wax from the surface of the new boat) and make sure it is dry before starting the installation.
2. Lay all EVA flooring flat before installation. After confirming the position, tear off the adhesive backing on one corner and start the installation.
3. Fix the adhesive and do not move the EVA flooring.
4. Use the round wheel to roll during the installation process (you need to press the 5. LOGO position with your finger in advance to avoid air entry). If there is air generated, a small needle can be used to puncture the bubble exclusion.
Note: 48 hours after installation shall not be immersed in water.

Making Templates:

If we don't have a matching boat in our sales list, please provide us with a template and we can manufacture it according to your template requirements. More details of customized templates are available:?https://www.hjdeck.com/pages/custom-features#section6