Shop

Specification:

3 Piece Cut
Unidirectional Nose - Tail Diamond Groove Pattern
25mm 45/90 Contoured Tail Kick
8mm Low Oval Arch
11.5" Wide x 14" Long
6" Wide at Tail

Features:

Made from lightweight thermoformed EVA foam, the Hjdeck features a three-piece design with perforated points and clear channels to reduce weight. Its ultra-thin design gives you maximum board feel in turns, allowing you to feel more in control and connected to the board.

MAXIMUM CONTROL AND COMFORT - Push the limits for maximum speed and power by turning the tail into a pliable double side channel grip sweet spot that you can ride confidently and comfortably on your wakeboard, skateboard, kiteboard or wakeboard.

TECHNICAL KICKS - Surf kicks are 45 degrees to the vertical to lock your feet in place and minimize falls.The beveled edges on the 28mm high surf kick pads reduce drag and increase speed, perfect for all types of waves.

Fits all surfboards - Surf Traction Pad is 12 inches wide x 12 inches high x 5 millimeters thick with an additional 8 millimeter arch. Can be used as a traction pad for wakeboards or fish, or as a grip pad for any longboard or surfboard.

GUARANTEED GRIP - Ultra-strong 3M green adhesive permanently bonds to surfboards with just the right amount of prep work. Designed by two professional surfers in California who stand behind their product. If your surfboard or skateboard is not working for any reason, drop us a line and we'll take care of you. Let's surf together!

Specification:

3 Piece Cut
Unidirectional Nose - Tail Diamond Groove Pattern
25mm 45/90 Contoured Tail Kick
8mm Low Oval Arch
11.5" Wide x 14" Long
6" Wide at Tail

Features:

Made from lightweight thermoformed EVA foam, the Hjdeck features a three-piece design with perforated points and clear channels to reduce weight. Its ultra-thin design gives you maximum board feel in turns, allowing you to feel more in control and connected to the board.

MAXIMUM CONTROL AND COMFORT - Push the limits for maximum speed and power by turning the tail into a pliable double side channel grip sweet spot that you can ride confidently and comfortably on your wakeboard, skateboard, kiteboard or wakeboard.

TECHNICAL KICKS - Surf kicks are 45 degrees to the vertical to lock your feet in place and minimize falls.The beveled edges on the 28mm high surf kick pads reduce drag and increase speed, perfect for all types of waves.

Fits all surfboards - Surf Traction Pad is 12 inches wide x 12 inches high x 5 millimeters thick with an additional 8 millimeter arch. Can be used as a traction pad for wakeboards or fish, or as a grip pad for any longboard or surfboard.

GUARANTEED GRIP - Ultra-strong 3M green adhesive permanently bonds to surfboards with just the right amount of prep work. Designed by two professional surfers in California who stand behind their product. If your surfboard or skateboard is not working for any reason, drop us a line and we'll take care of you. Let's surf together!

Doral 245 Sunquest 2008 EVA Foam Faux Teak Boat Deck MatteMarine Flooring Marine Boat Decking Carpet Yacht Vehicle Pad

Precautions

Please confirm your boat type before adding to the shopping cart. If you are not sure whether it meets your needs, you can contact us online or send us an email to confirm the size.

If you want to add your logo or want to add a pattern, you can send a JPG picture to our email, we will design a pattern and send it to you for confirmation, of course there will be a little extra cost that you need to pay.


Products information

Material: EVA foam
Thickness: 6mm
Hardness: 60°- 65°
Color：Teak Brown Black /Gray Black
Or if you need other colors, you can email us, we are a factory and can realize the colors you want
UV: ≥4.5G
Adhesive: 3M99786 （ Self-Adhesive Backing - No need to buy glue）

2011 Checkmate 2000 BRX EVA Foam Faux Teak Boat Deck Mat Flooring Marine Boat Decking Carpet Yacht Pad

Notes:

Please confirm your boat type before adding to cart. If you are not sure if it fits your needs, you can contact us online or send us an email to confirm the size.

If you want to add logo or pattern, you can send JPG image to our email, we will design the pattern and send it to you for confirmation, of course you need to pay extra fee.

Description:

Material: EVA foam
Texture: Brushed / Embossed (Default Brushed)
Thickness: 6mm
Hardness: 60°- 65°
UV: ≥4.5G
Adhesive: 3M99786 (3M Self-Adhesive Backing - No need to buy glue)
If you need other colors, you can email eric@hjdeck.com, we are a factory and can realize the colors you want.

For Design:

1. We can design drawings according to customers' requirements (free of charge).

2. We can provide design drawings for your choice.

3. Support LOGO customization, need file, format file: DXF/AI/PDF/JPJ/PNG, etc.

Installation Notes:

1. Before installation the floor needs to be cleaned with acetone or alcohol (to remove the wax from the surface of the new boat) and make sure it is dry before starting the installation.
2. Lay all EVA flooring flat before installation. After confirming the position, tear off the adhesive backing on one corner and start the installation.
3. Fix the adhesive and do not move the EVA flooring.
4. Use the round wheel to roll during the installation process (you need to press the 5. LOGO position with your finger in advance to avoid air entry). If there is air generated, a small needle can be used to puncture the bubble exclusion.
Note: 48 hours after installation shall not be immersed in water.

Making Templates:

If we don't have a matching boat in our sales list, please provide us with a template and we can manufacture it according to your template requirements. More details of customized templates are available: https://www.hjdeck.com/pages/custom-features#section6

2002 Crownline LPX Limited EVA Foam Faux Teak Boat Deck Mat Flooring Marine Boat Decking Carpet Yacht Pad

Application Guide:

2001 Crownline LPX Limited
2002 Crownline LPX Limited
2003 Crownline LPX Limited
2004 Crownline LPX Limited
2005 Crownline LPX Limited

Notes:

Please confirm your boat type before adding to cart. If you are not sure if it fits your needs, you can contact us online or send us an email to confirm the size.

If you want to add logo or pattern, you can send JPG image to our email, we will design the pattern and send it to you for confirmation, of course you need to pay extra fee.

Description:

Material: EVA foam
Texture: Brushed / Embossed (Default Brushed)
Thickness: 6mm
Hardness: 60°- 65°
UV: ≥4.5G
Adhesive: 3M99786 (3M Self-Adhesive Backing - No need to buy glue)
If you need other colors, you can email eric@hjdeck.com, we are a factory and can realize the colors you want.

For Design:

1. We can design drawings according to customers' requirements (free of charge).

2. We can provide design drawings for your choice.

3. Support LOGO customization, need file, format file: DXF/AI/PDF/JPJ/PNG, etc.

Installation Notes:

1. Before installation the floor needs to be cleaned with acetone or alcohol (to remove the wax from the surface of the new boat) and make sure it is dry before starting the installation.
2. Lay all EVA flooring flat before installation. After confirming the position, tear off the adhesive backing on one corner and start the installation.
3. Fix the adhesive and do not move the EVA flooring.
4. Use the round wheel to roll during the installation process (you need to press the 5. LOGO position with your finger in advance to avoid air entry). If there is air generated, a small needle can be used to puncture the bubble exclusion.
Note: 48 hours after installation shall not be immersed in water.

Making Templates:

If we don't have a matching boat in our sales list, please provide us with a template and we can manufacture it according to your template requirements. More details of customized templates are available: https://www.hjdeck.com/pages/custom-features#section6

2012 Crownline 285 SS EVA Foam Faux Teak Boat Deck Mat Flooring Marine Boat Decking Carpet Yacht Pad

Notes:

Please confirm your boat type before adding to cart. If you are not sure if it fits your needs, you can contact us online or send us an email to confirm the size.

If you want to add logo or pattern, you can send JPG image to our email, we will design the pattern and send it to you for confirmation, of course you need to pay extra fee.

Description:

Material: EVA foam
Texture: Brushed / Embossed (Default Brushed)
Thickness: 6mm
Hardness: 60°- 65°
UV: ≥4.5G
Adhesive: 3M99786 (3M Self-Adhesive Backing - No need to buy glue)
If you need other colors, you can email eric@hjdeck.com, we are a factory and can realize the colors you want.

For Design:

1. We can design drawings according to customers' requirements (free of charge).

2. We can provide design drawings for your choice.

3. Support LOGO customization, need file, format file: DXF/AI/PDF/JPJ/PNG, etc.

Installation Notes:

1. Before installation the floor needs to be cleaned with acetone or alcohol (to remove the wax from the surface of the new boat) and make sure it is dry before starting the installation.
2. Lay all EVA flooring flat before installation. After confirming the position, tear off the adhesive backing on one corner and start the installation.
3. Fix the adhesive and do not move the EVA flooring.
4. Use the round wheel to roll during the installation process (you need to press the 5. LOGO position with your finger in advance to avoid air entry). If there is air generated, a small needle can be used to puncture the bubble exclusion.
Note: 48 hours after installation shall not be immersed in water.

Making Templates:

If we don't have a matching boat in our sales list, please provide us with a template and we can manufacture it according to your template requirements. More details of customized templates are available: https://www.hjdeck.com/pages/custom-features#section6

2005-2009 Crownline 275 CR EVA Foam Faux Teak Boat Deck Mat Flooring Marine Boat Decking Carpet Yacht Pad

Application Guide:

2005 Crownline 275 CR
2006 Crownline 275 CR
2007 Crownline 275 CR
2008 Crownline 275 CR
2009 Crownline 275 CR

Notes:

Please confirm your boat type before adding to cart. If you are not sure if it fits your needs, you can contact us online or send us an email to confirm the size.

If you want to add logo or pattern, you can send JPG image to our email, we will design the pattern and send it to you for confirmation, of course you need to pay extra fee.

Description:

Material: EVA foam
Texture: Brushed / Embossed (Default Brushed)
Thickness: 6mm
Hardness: 60°- 65°
UV: ≥4.5G
Adhesive: 3M99786 (3M Self-Adhesive Backing - No need to buy glue)
If you need other colors, you can email eric@hjdeck.com, we are a factory and can realize the colors you want.

For Design:

1. We can design drawings according to customers' requirements (free of charge).

2. We can provide design drawings for your choice.

3. Support LOGO customization, need file, format file: DXF/AI/PDF/JPJ/PNG, etc.

Installation Notes:

1. Before installation the floor needs to be cleaned with acetone or alcohol (to remove the wax from the surface of the new boat) and make sure it is dry before starting the installation.
2. Lay all EVA flooring flat before installation. After confirming the position, tear off the adhesive backing on one corner and start the installation.
3. Fix the adhesive and do not move the EVA flooring.
4. Use the round wheel to roll during the installation process (you need to press the 5. LOGO position with your finger in advance to avoid air entry). If there is air generated, a small needle can be used to puncture the bubble exclusion.
Note: 48 hours after installation shall not be immersed in water.

Making Templates:

If we don't have a matching boat in our sales list, please provide us with a template and we can manufacture it according to your template requirements. More details of customized templates are available: https://www.hjdeck.com/pages/custom-features#section6

2001 Crownline 242 EVA Foam Faux Teak Boat Deck Mat Flooring Marine Boat Decking Carpet Yacht Pad

Notes:

Please confirm your boat type before adding to cart. If you are not sure if it fits your needs, you can contact us online or send us an email to confirm the size.

If you want to add logo or pattern, you can send JPG image to our email, we will design the pattern and send it to you for confirmation, of course you need to pay extra fee.

Description:

Material: EVA foam
Texture: Brushed / Embossed (Default Brushed)
Thickness: 6mm
Hardness: 60°- 65°
UV: ≥4.5G
Adhesive: 3M99786 (3M Self-Adhesive Backing - No need to buy glue)
If you need other colors, you can email eric@hjdeck.com, we are a factory and can realize the colors you want.

For Design:

1. We can design drawings according to customers' requirements (free of charge).

2. We can provide design drawings for your choice.

3. Support LOGO customization, need file, format file: DXF/AI/PDF/JPJ/PNG, etc.

Installation Notes:

1. Before installation the floor needs to be cleaned with acetone or alcohol (to remove the wax from the surface of the new boat) and make sure it is dry before starting the installation.
2. Lay all EVA flooring flat before installation. After confirming the position, tear off the adhesive backing on one corner and start the installation.
3. Fix the adhesive and do not move the EVA flooring.
4. Use the round wheel to roll during the installation process (you need to press the 5. LOGO position with your finger in advance to avoid air entry). If there is air generated, a small needle can be used to puncture the bubble exclusion.
Note: 48 hours after installation shall not be immersed in water.

Making Templates:

If we don't have a matching boat in our sales list, please provide us with a template and we can manufacture it according to your template requirements. More details of customized templates are available: https://www.hjdeck.com/pages/custom-features#section6

2001 Crownline 242 EVA Foam Faux Teak Boat Deck Mat Flooring Marine Boat Decking Carpet Yacht Pad

Notes:

Please confirm your boat type before adding to cart. If you are not sure if it fits your needs, you can contact us online or send us an email to confirm the size.

If you want to add logo or pattern, you can send JPG image to our email, we will design the pattern and send it to you for confirmation, of course you need to pay extra fee.

Description:

Material: EVA foam
Texture: Brushed / Embossed (Default Brushed)
Thickness: 6mm
Hardness: 60°- 65°
UV: ≥4.5G
Adhesive: 3M99786 (3M Self-Adhesive Backing - No need to buy glue)
If you need other colors, you can email eric@hjdeck.com, we are a factory and can realize the colors you want.

For Design:

1. We can design drawings according to customers' requirements (free of charge).

2. We can provide design drawings for your choice.

3. Support LOGO customization, need file, format file: DXF/AI/PDF/JPJ/PNG, etc.

Installation Notes:

1. Before installation the floor needs to be cleaned with acetone or alcohol (to remove the wax from the surface of the new boat) and make sure it is dry before starting the installation.
2. Lay all EVA flooring flat before installation. After confirming the position, tear off the adhesive backing on one corner and start the installation.
3. Fix the adhesive and do not move the EVA flooring.
4. Use the round wheel to roll during the installation process (you need to press the 5. LOGO position with your finger in advance to avoid air entry). If there is air generated, a small needle can be used to puncture the bubble exclusion.
Note: 48 hours after installation shall not be immersed in water.

Making Templates:

If we don't have a matching boat in our sales list, please provide us with a template and we can manufacture it according to your template requirements. More details of customized templates are available: https://www.hjdeck.com/pages/custom-features#section6

2001 Crownline 239 EVA Foam Faux Teak Boat Deck Mat Flooring Marine Boat Decking Carpet Yacht Pad

Notes:

Please confirm your boat type before adding to cart. If you are not sure if it fits your needs, you can contact us online or send us an email to confirm the size.

If you want to add logo or pattern, you can send JPG image to our email, we will design the pattern and send it to you for confirmation, of course you need to pay extra fee.

Description:

Material: EVA foam
Texture: Brushed / Embossed (Default Brushed)
Thickness: 6mm
Hardness: 60°- 65°
UV: ≥4.5G
Adhesive: 3M99786 (3M Self-Adhesive Backing - No need to buy glue)
If you need other colors, you can email eric@hjdeck.com, we are a factory and can realize the colors you want.

For Design:

1. We can design drawings according to customers' requirements (free of charge).

2. We can provide design drawings for your choice.

3. Support LOGO customization, need file, format file: DXF/AI/PDF/JPJ/PNG, etc.

Installation Notes:

1. Before installation the floor needs to be cleaned with acetone or alcohol (to remove the wax from the surface of the new boat) and make sure it is dry before starting the installation.
2. Lay all EVA flooring flat before installation. After confirming the position, tear off the adhesive backing on one corner and start the installation.
3. Fix the adhesive and do not move the EVA flooring.
4. Use the round wheel to roll during the installation process (you need to press the 5. LOGO position with your finger in advance to avoid air entry). If there is air generated, a small needle can be used to puncture the bubble exclusion.
Note: 48 hours after installation shall not be immersed in water.

Making Templates:

If we don't have a matching boat in our sales list, please provide us with a template and we can manufacture it according to your template requirements. More details of customized templates are available: https://www.hjdeck.com/pages/custom-features#section6