Shop

Yeti Roadie 20 Cooler Top Pad

Get the most out of your Yeti Roadie 20 cooler with Hjdeck cooler traction pads.
Cooler Traction Pad. It features a pressure sensitive adhesive back to permanently secure the backing, so you get better traction and less worry when using your cooler as a casting platform.
In addition, your cooler becomes a more comfortable seat because Hjdeck cooler traction pads are made of 6 mm.

Available in 3 colors
6mm Thickness
Brushed /Embossed texture (hot-pressed dots), non-slip, pressed
Teak lines Design
With strong adhesive, easy to install

1. Customized colors is available.
2. Customized thickness is available.
3. Customized size in you requirement.
4. Customized shape according to supply drawing.
5. Customized logo: We can make logo for your cooler pad.

Click here to contact us.

2013 Monterey 224 FSC EVA Foam Faux Teak Boat Deck MatteMarine Flooring Marine Boat Decking Pad

Notes:

Please confirm your boat type before adding to cart. If you are not sure if it fits your needs, you can contact us online or send us an email to confirm the size.

If you want to add logo or pattern, you can send JPG image to our email, we will design the pattern and send it to you for confirmation, of course you need to pay extra fee.

Description:

Material: EVA foam
Texture: Brushed / Embossed (Default Brushed)
Thickness: 6mm
Hardness: 60°- 65°
UV: ≥4.5G
Adhesive: 3M99786 (3M Self-Adhesive Backing - No need to buy glue)
If you need other colors, you can email eric@hjdeck.com, we are a factory and can realize the colors you want.

For Design:

1. We can design drawings according to customers' requirements (free of charge).

2. We can provide design drawings for your choice.

3. Support LOGO customization, need file, format file: DXF/AI/PDF/JPJ/PNG, etc.

Installation Notes:

1. Before installation the floor needs to be cleaned with acetone or alcohol (to remove the wax from the surface of the new boat) and make sure it is dry before starting the installation.
2. Lay all EVA flooring flat before installation. After confirming the position, tear off the adhesive backing on one corner and start the installation.
3. Fix the adhesive and do not move the EVA flooring.
4. Use the round wheel to roll during the installation process (you need to press the 5. LOGO position with your finger in advance to avoid air entry). If there is air generated, a small needle can be used to puncture the bubble exclusion.
Note: 48 hours after installation shall not be immersed in water.

Making Templates:

If we don't have a matching boat in our sales list, please provide us with a template and we can manufacture it according to your template requirements. More details of customized templates are available: https://www.hjdeck.com/pages/custom-features#section6

Application Guide:

2011 Monterey 224 FS
2012 Monterey 224 FS
2013 Monterey 224 FS
2014 Monterey 224 FS
2015 Monterey 224 FS

Yamaha FX, HO, SVHO, LTD 2019-2023 Jet Ski Traction Mats

Please note if you need a water outlet!

Application:

2025 YAMAHA FX CRUISER SVHO
2024 YAMAHA FX CRUISER SVHO
2023 YAMAHA FX CRUISER SVHO
2022 YAMAHA FX CRUISER SVHO
2021 YAMAHA FX CRUISER SVHO
2020 YAMAHA FX CRUISER SVHO
2019 YAMAHA FX CRUISER SVHO

2025 YAMAHA FX SVHO
2024 YAMAHA FX SVHO
2023 YAMAHA FX SVHO
2022 YAMAHA FX SVHO
2021 YAMAHA FX SVHO
2020 YAMAHA FX SVHO
2019 YAMAHA FX SVHO

2025 YAMAHA FX LTD SVHO
2024 YAMAHA FX LTD SVHO
2023 YAMAHA FX LTD SVHO
2022 YAMAHA FX LTD SVHO
2021 YAMAHA FX LTD SVHO
2020 YAMAHA FX LTD SVHO
2019 YAMAHA FX LTD SVHO

2023 YAMAHA FX CRUISER HO (1.8L)
2022 YAMAHA FX CRUISER HO (1.8L)
2021 YAMAHA FX CRUISER HO (1.8L)
2020 YAMAHA FX CRUISER HO (1.8L)
2019 YAMAHA FX CRUISER HO (1.8L)

2023 YAMAHA FX HO (1.8L)
2022 YAMAHA FX HO (1.8L)
2021 YAMAHA FX HO (1.8L)
2020 YAMAHA FX HO (1.8L)
2019 YAMAHA FX HO (1.8L)

- Upgrade your 2012-2018 Yamaha Waverunner FX with our Designs' premium EVA Foam Decking for a stylish and functional improvement.
- Crafted from Grade A EVA environmental protection material, our decking offers superior elasticity and high density, ensuring durability and stability for your boat.
- Easy to install with self-adhesive backing, this decking is odorless, non-toxic, and stain-resistant for hassle-free maintenance.
- Enjoy a non-slip surface in wet or dry conditions, providing added safety and comfort while out on the water.
- With a clean, high-end appearance, our DIY Jet Ski Traction Mats enhance both the look and performance of your vessel.

Product Description:

1. Customized colors is available.
2. Customized thickness is available.
3. Customized size in you requirement.
4. Customized shape according to supply drawing.
5. Customized logo: We can make logo for your marine traction pad.

Click here to contact us.

2022-2025 Sea-Doo Fish Pro Scout 130 Traction Mats

Notes:

1. Please note: If your jet ski comes with a Sea-Doo or other brand sound system, please remove it, install the traction pads, and then reinstall it.

2. Please confirm your boat type before adding to cart. If you are not sure if it fits your needs, you can contact us online or send us an email to confirm the size.

3. If you want to add logo or pattern, you can send JPG image to our email, we will design the pattern and send it to you for confirmation, of course you need to pay extra fee.

Description:

Material: EVA foam
Thickness: 6mm
Hardness: 60°- 65°
UV: ≥4.5G
Adhesive: 3M99786 (3M Self-Adhesive Backing - No need to buy glue)
If you need other colors, you can email eric@hjdeck.com, we are a factory and can realize the colors you want.

✅ Customized colors is available.
✅ Customized thickness is available.
✅ Customized size in you requirement.
✅ Customized shape according to supply drawing.
✅ Customized logo: We can make logo for your marine traction pad.

Application Guide:

2020 Sea-Doo GTI 130
2020 Sea-Doo GTI SE 130
2020 Sea-Doo GTR 230
2020 Sea-Doo GTI 90
2020 Sea-Doo GTI SE 170
2020 Sea-Doo Wake 170

2021 Sea-Doo GTI 130
2021 Sea-Doo GTI SE 130
2021 Sea-Doo GTR 230
2021 Sea-Doo GTI 90
2021 Sea-Doo GTI SE 170
2021 Sea-Doo Wake 170

2022 Sea-Doo GTI 130
2022 Sea-Doo GTI SE 130
2022 Sea-Doo GTR 230
2022 Sea-Doo GTI 90
2022 Sea-Doo GTI SE 170
2022 Sea-Doo Wake 170
2022 Sea-Doo Fish Pro Scout 130

2023 Sea-Doo GTI 130
2023 Sea-Doo GTI SE 130
2023 Sea-Doo GTR 230
2023 Sea-Doo GTI 90
2023 Sea-Doo GTI SE 170
2023 Sea-Doo Wake 170
2023 Sea-Doo Fish Pro Scout 130

2024 Sea-Doo GTI 130
2024 Sea-Doo GTI SE 130
2024 Sea-Doo GTR 230
2024 Sea-Doo GTI SE 170
2024 Sea-Doo Wake 170
2024 Sea-Doo Fish Pro Scout 130

2025 Sea-Doo GTI SE 130
2025 Sea-Doo GTI SE 170
2025 Sea-Doo GTR 230
2025 Sea-Doo Wake 170
2025 Sea-Doo Fish Pro Scout 130

Visit the Custom Features page to learn more about colors, textures, and more.

Enjoy The Amazing Luxury of Custom Decking

Upgrade your boat with stylish and functional EVA Foam Decking from Our Designs. Our EVA foam is a high performance, cushioned decking material that feels comfortable and stable underfoot. And with its stunning good looks, it adds a clean, high-end look to your vessel.

We use the best quality Grade A EVA environmental protection material

• 1. Elastic, not easy deformation, not easy to tear.
• 2. High Density, not easy to damage. Odorless, non-toxic.
• 3. Self-adhesion, easy to installation.
• 4. Stain resistant & very easy to maintain, can also be pressure washed.
• 5. Provides a non-slippery surface for your boat in both wet & dry conditions.

Product Description£º

1. Customized colors is available.
2. Customized thickness is available.
3. Customized size in you requirement.
4. Customized shape according to supply drawing.
5. Customized logo: We can make logo for your marine traction pad.

Application Guide:

2011-2019 Sea-Doo GTI SE 130

2011-2019 Sea-Doo GTI 130
2012-2019 Sea-Doo Wake 155
2013 Sea-Doo GTR 215
2013 Sea-Doo GTI SE 155
2013 Sea-Doo GTI Limited 155

Click here to contact us.

Enjoy The Amazing Luxury of Custom Decking

Upgrade your boat with stylish and functional EVA Foam Decking from Our?Designs. Our EVA foam is a high performance, cushioned decking material that feels comfortable and stable underfoot. And with its stunning good looks, it adds a clean, high-end look to your vessel.

We use the best quality Grade A EVA environmental protection material

• 1. Elastic, not easy deformation, not easy to tear.
• 2. High Density, not easy to damage. Odorless, non-toxic.
• 3. Self-adhesion, easy to installation.
• 4. Stain resistant & very easy to maintain, can also be pressure washed.
• 5. Provides a non-slippery surface for your boat in both wet & dry conditions.

Product Description:

1. Customized colors is available.
2. Customized thickness is available.
3. Customized size in you requirement.
4. Customized shape according to supply drawing.
5. Customized logo: We can make logo for your marine traction pad.

Application:

2011-2018 Sea-Doo GTI SE 130
2012-2019 Sea-Doo Wake 155
2013 Sea-Doo GTR 215
2013 Sea-Doo GTI SE 155
2013 Sea-Doo GTI Limited 155

Click here to contact us.

Crownline 216 2005 EVA Foam Faux Teak Boat Deck Mat Flooring Marine Boat Decking Carpet Yacht Pad

Notes:

Please confirm your boat type before adding to cart. If you are not sure if it fits your needs, you can contact us online or send us an email to confirm the size.

If you want to add logo or pattern, you can send JPG image to our email, we will design the pattern and send it to you for confirmation, of course you need to pay extra fee.

Description:

Material: EVA foam
Texture: Brushed / Embossed (Default Brushed)
Thickness: 6mm
Hardness: 60°- 65°
UV: ≥4.5G
Adhesive: 3M99786 (3M Self-Adhesive Backing - No need to buy glue)
If you need other colors, you can email eric@hjdeck.com, we are a factory and can realize the colors you want.

For Design:

1. We can design drawings according to customers' requirements (free of charge).

2. We can provide design drawings for your choice.

3. Support LOGO customization, need file, format file: DXF/AI/PDF/JPJ/PNG, etc.

Installation Notes:

1. Before installation the floor needs to be cleaned with acetone or alcohol (to remove the wax from the surface of the new boat) and make sure it is dry before starting the installation.
2. Lay all EVA flooring flat before installation. After confirming the position, tear off the adhesive backing on one corner and start the installation.
3. Fix the adhesive and do not move the EVA flooring.
4. Use the round wheel to roll during the installation process (you need to press the 5. LOGO position with your finger in advance to avoid air entry). If there is air generated, a small needle can be used to puncture the bubble exclusion.
Note: 48 hours after installation shall not be immersed in water.

Making Templates:

If we don't have a matching boat in our sales list, please provide us with a template and we can manufacture it according to your template requirements. More details of customized templates are available: https://www.hjdeck.com/pages/custom-features#section6

2005-2010 Chaparral 256 SSX EVA Foam Teak Deck Flooring Kit

Application Guide:

2005 Chaparral 256 SSX
2006 Chaparral 256 SSX
2007 Chaparral 256 SSX
2008 Chaparral 256 SSX
2009 Chaparral 256 SSX
2010 Chaparral 256 SSX

Precautions before payment:

• 1. Please make sure the boat model matches your yacht/boat model.
• 2. Some boat models have different configurations and options, please pay attention to choose the most suitable boat model.
• 3. If you are not sure if your boat matches the drawing, please send us photos of the swim platform and cockpit, we can help to determine the suitability.

Upgrade your boat with stylish and functional EVA Foam Decking from Our Designs. Our EVA foam is a high performance, cushioned decking material that feels comfortable and stable underfoot. And with its stunning good looks, it adds a clean, high-end look to your vessel.

We use the best quality Grade A EVA environmental protection material

• 1. Elastic, not easy deformation, not easy to tear.
• 2. High Density, not easy to damage. Odorless, non-toxic.
• 3. Self-adhesion, easy to installation.
• 4. Stain resistant & very easy to maintain, can also be pressure washed.
• 5. Provides a non-slippery surface for your boat in both wet & dry conditions.

Product Description:

1. Customized colors is available.
2. Customized thickness is available.
3. Customized size in you requirement.
4. Customized shape according to supply drawing.
5. Customized logo: We can make logo for your marine flooring.

For Design:

1. We can design drawings according to customers' requirements (free of charge).

2. We can provide design drawings for your choice.

3. Support LOGO customization, need file, format file: DXF/AI/PDF/JPJ/PNG, etc.

Installation Notes:

• Before installation the floor needs to be cleaned with acetone or alcohol (to remove the wax from the surface of the new boat) and make sure it is dry before starting the installation.
• Lay all EVA flooring flat before installation. After confirming the position, tear off the adhesive backing on one corner and start the installation.
• Fix the adhesive and do not move the EVA flooring.
• Use the Rubber Roller to roll during the installation process (you need to press the LOGO position with your finger in advance to avoid air entry). If there is air generated, a small needle can be used to puncture the bubble exclusion.
• 48 hours after installation shall not be immersed in water.

Making Templates:

If we don't have a matching boat in our sales list, please provide us with a template and we can manufacture it according to your template requirements. More details of customized templates are available: https://www.hjdeck.com/pages/custom-features#section6

Production period:

Confirm the size with you after receiving the payment, start production after confirming the size, the production process usually takes about 5-12 working days (holidays postponed), we will send you the photos and ship the order after the production is completed.

The production period for orders with customized colors/templates takes about 10-25 working days to ship.

Other:

You can choose any parts shown in the drawing to place an order, and we can provide corresponding production and sales support.

Discounts are available for repeat orders, please feel free to contact us!

Click here to contact us.

Dimensions: 14″ x 36″ / 16″ x 39″
Material Thickness: 13mm
Texture: Brushed
Color: Brown+Black / Light grey+Black
Teak routing design

Designed for skippers who demand durability and precision, the Rudder Mat redefines comfort on the water. With its 13mm marine-grade construction, it's more than just a Mat, it's your steadfast ally against fatigue, slippery surfaces and harsh ocean conditions.

How To Install

Please see this page for installation: How to Install Hjdeck

Cleaning Tips:

Act fast to clean spills and avoid stains. Common culprits like ketchup, mustard, rusted fishhooks, fish blood, and bird droppings can leave marks if not wiped up promptly.

For general dirt and stains:

Use an all-purpose cleaner  mixed with warm water.

Scrub with a medium-bristle deck brush in circular motions.

Rinse thoroughly with clean water.

For tough stains like fish blood:

Combine 1 cup bleach with 1 gallon of warm water.

Scrub the affected area until the stain lifts.

Repeat if necessary.

Avoid: Harsh chemicals like mineral spirits, which can damage the decking.

Maintenance Advice:

Don’t leave items (pool toys, tools, water bottles) sitting on the deck for long periods.

Keep reflective surfaces (glass, mirrors) away—they can focus sunlight and cause damage.

When not in use, cover or store the decking to protect it from prolonged sun exposure and extend its lifespan.

2023 MALIBU 22 LSV EVA Foam Faux Teak Boat Deck MatteMarine Flooring Marine Boat Decking Carpet Leaf Yacht Vehicle Pad

Precautions

Please confirm your boat type before adding to the shopping cart. If you are not sure whether it meets your needs, you can contact us online or send us an email to confirm the size.

If you want to add your logo or want to add a pattern, you can send a JPG picture to our email, we will design a pattern and send it to you for confirmation, of course there will be a little extra cost that you need to pay.


Products information

Material:EVA foam
Thickness:6mm
Hardness: 60°- 65°
Color：Teak Brown Black /Gray Black
Or if you need other colors, you can email us, we are a factory and can realize the colors you want
UV: ≥4.5G
Adhesive:3M99786 （ Self-Adhesive Backing - No need to buy glue）