Newest Products

Yeti Roadie 20 Cooler Top Pad

Get the most out of your Yeti Roadie 20 cooler with Hjdeck cooler traction pads.
Cooler Traction Pad. It features a pressure sensitive adhesive back to permanently secure the backing, so you get better traction and less worry when using your cooler as a casting platform.
In addition, your cooler becomes a more comfortable seat because Hjdeck cooler traction pads are made of 6 mm.

Available in 3 colors
6mm Thickness
Brushed /Embossed texture (hot-pressed dots), non-slip, pressed
Teak lines Design
With strong adhesive, easy to install

1. Customized colors is available.
2. Customized thickness is available.
3. Customized size in you requirement.
4. Customized shape according to supply drawing.
5. Customized logo: We can make logo for your cooler pad.

Click here to contact us.

2006-2007 Sea Ray 205 Sport EVA Foam Faux Teak Boat Deck MatteMarine Flooring Marine Boat Decking Carpet Leaf Yacht Vehicle Pad

Notes:

Please confirm your boat type before adding to cart. If you are not sure if it fits your needs, you can contact us online or send us an email to confirm the size.

If you want to add logo or pattern, you can send JPG image to our email, we will design the pattern and send it to you for confirmation, of course you need to pay extra fee.

Description:

Material: EVA foam
Texture: Brushed / Embossed (Default Brushed)
Thickness: 6mm
Hardness: 60°- 65°
UV: ≥4.5G
Adhesive: 3M99786 (3M Self-Adhesive Backing - No need to buy glue)
If you need other colors, you can email eric@hjdeck.com, we are a factory and can realize the colors you want.

For Design:

1. We can design drawings according to customers' requirements (free of charge).

2. We can provide design drawings for your choice.

3. Support LOGO customization, need file, format file: DXF/AI/PDF/JPJ/PNG, etc.

Installation Notes:

1. Before installation the floor needs to be cleaned with acetone or alcohol (to remove the wax from the surface of the new boat) and make sure it is dry before starting the installation.
2. Lay all EVA flooring flat before installation. After confirming the position, tear off the adhesive backing on one corner and start the installation.
3. Fix the adhesive and do not move the EVA flooring.
4. Use the round wheel to roll during the installation process (you need to press the 5. LOGO position with your finger in advance to avoid air entry). If there is air generated, a small needle can be used to puncture the bubble exclusion.
Note: 48 hours after installation shall not be immersed in water.

Making Templates:

If we don't have a matching boat in our sales list, please provide us with a template and we can manufacture it according to your template requirements. More details of customized templates are available: https://www.hjdeck.com/pages/custom-features#section6

2013 Monterey 224 FSC EVA Foam Faux Teak Boat Deck MatteMarine Flooring Marine Boat Decking Pad

Notes:

Please confirm your boat type before adding to cart. If you are not sure if it fits your needs, you can contact us online or send us an email to confirm the size.

If you want to add logo or pattern, you can send JPG image to our email, we will design the pattern and send it to you for confirmation, of course you need to pay extra fee.

Description:

Material: EVA foam
Texture: Brushed / Embossed (Default Brushed)
Thickness: 6mm
Hardness: 60°- 65°
UV: ≥4.5G
Adhesive: 3M99786 (3M Self-Adhesive Backing - No need to buy glue)
If you need other colors, you can email eric@hjdeck.com, we are a factory and can realize the colors you want.

For Design:

1. We can design drawings according to customers' requirements (free of charge).

2. We can provide design drawings for your choice.

3. Support LOGO customization, need file, format file: DXF/AI/PDF/JPJ/PNG, etc.

Installation Notes:

1. Before installation the floor needs to be cleaned with acetone or alcohol (to remove the wax from the surface of the new boat) and make sure it is dry before starting the installation.
2. Lay all EVA flooring flat before installation. After confirming the position, tear off the adhesive backing on one corner and start the installation.
3. Fix the adhesive and do not move the EVA flooring.
4. Use the round wheel to roll during the installation process (you need to press the 5. LOGO position with your finger in advance to avoid air entry). If there is air generated, a small needle can be used to puncture the bubble exclusion.
Note: 48 hours after installation shall not be immersed in water.

Making Templates:

If we don't have a matching boat in our sales list, please provide us with a template and we can manufacture it according to your template requirements. More details of customized templates are available: https://www.hjdeck.com/pages/custom-features#section6

Application Guide:

2011 Monterey 224 FS
2012 Monterey 224 FS
2013 Monterey 224 FS
2014 Monterey 224 FS
2015 Monterey 224 FS

Yamaha FX, HO, SVHO, LTD 2019-2023 Jet Ski Traction Mats

Please note if you need a water outlet!

Application:

2025 YAMAHA FX CRUISER SVHO
2024 YAMAHA FX CRUISER SVHO
2023 YAMAHA FX CRUISER SVHO
2022 YAMAHA FX CRUISER SVHO
2021 YAMAHA FX CRUISER SVHO
2020 YAMAHA FX CRUISER SVHO
2019 YAMAHA FX CRUISER SVHO

2025 YAMAHA FX SVHO
2024 YAMAHA FX SVHO
2023 YAMAHA FX SVHO
2022 YAMAHA FX SVHO
2021 YAMAHA FX SVHO
2020 YAMAHA FX SVHO
2019 YAMAHA FX SVHO

2025 YAMAHA FX LTD SVHO
2024 YAMAHA FX LTD SVHO
2023 YAMAHA FX LTD SVHO
2022 YAMAHA FX LTD SVHO
2021 YAMAHA FX LTD SVHO
2020 YAMAHA FX LTD SVHO
2019 YAMAHA FX LTD SVHO

2023 YAMAHA FX CRUISER HO (1.8L)
2022 YAMAHA FX CRUISER HO (1.8L)
2021 YAMAHA FX CRUISER HO (1.8L)
2020 YAMAHA FX CRUISER HO (1.8L)
2019 YAMAHA FX CRUISER HO (1.8L)

2023 YAMAHA FX HO (1.8L)
2022 YAMAHA FX HO (1.8L)
2021 YAMAHA FX HO (1.8L)
2020 YAMAHA FX HO (1.8L)
2019 YAMAHA FX HO (1.8L)

- Upgrade your 2012-2018 Yamaha Waverunner FX with our Designs' premium EVA Foam Decking for a stylish and functional improvement.
- Crafted from Grade A EVA environmental protection material, our decking offers superior elasticity and high density, ensuring durability and stability for your boat.
- Easy to install with self-adhesive backing, this decking is odorless, non-toxic, and stain-resistant for hassle-free maintenance.
- Enjoy a non-slip surface in wet or dry conditions, providing added safety and comfort while out on the water.
- With a clean, high-end appearance, our DIY Jet Ski Traction Mats enhance both the look and performance of your vessel.

Product Description:

1. Customized colors is available.
2. Customized thickness is available.
3. Customized size in you requirement.
4. Customized shape according to supply drawing.
5. Customized logo: We can make logo for your marine traction pad.

Click here to contact us.

2022-2025 Sea-Doo Fish Pro Scout 130 Traction Mats

Notes:

1. Please note: If your jet ski comes with a Sea-Doo or other brand sound system, please remove it, install the traction pads, and then reinstall it.

2. Please confirm your boat type before adding to cart. If you are not sure if it fits your needs, you can contact us online or send us an email to confirm the size.

3. If you want to add logo or pattern, you can send JPG image to our email, we will design the pattern and send it to you for confirmation, of course you need to pay extra fee.

Description:

Material: EVA foam
Thickness: 6mm
Hardness: 60°- 65°
UV: ≥4.5G
Adhesive: 3M99786 (3M Self-Adhesive Backing - No need to buy glue)
If you need other colors, you can email eric@hjdeck.com, we are a factory and can realize the colors you want.

✅ Customized colors is available.
✅ Customized thickness is available.
✅ Customized size in you requirement.
✅ Customized shape according to supply drawing.
✅ Customized logo: We can make logo for your marine traction pad.

Application Guide:

2020 Sea-Doo GTI 130
2020 Sea-Doo GTI SE 130
2020 Sea-Doo GTR 230
2020 Sea-Doo GTI 90
2020 Sea-Doo GTI SE 170
2020 Sea-Doo Wake 170

2021 Sea-Doo GTI 130
2021 Sea-Doo GTI SE 130
2021 Sea-Doo GTR 230
2021 Sea-Doo GTI 90
2021 Sea-Doo GTI SE 170
2021 Sea-Doo Wake 170

2022 Sea-Doo GTI 130
2022 Sea-Doo GTI SE 130
2022 Sea-Doo GTR 230
2022 Sea-Doo GTI 90
2022 Sea-Doo GTI SE 170
2022 Sea-Doo Wake 170
2022 Sea-Doo Fish Pro Scout 130

2023 Sea-Doo GTI 130
2023 Sea-Doo GTI SE 130
2023 Sea-Doo GTR 230
2023 Sea-Doo GTI 90
2023 Sea-Doo GTI SE 170
2023 Sea-Doo Wake 170
2023 Sea-Doo Fish Pro Scout 130

2024 Sea-Doo GTI 130
2024 Sea-Doo GTI SE 130
2024 Sea-Doo GTR 230
2024 Sea-Doo GTI SE 170
2024 Sea-Doo Wake 170
2024 Sea-Doo Fish Pro Scout 130

2025 Sea-Doo GTI SE 130
2025 Sea-Doo GTI SE 170
2025 Sea-Doo GTR 230
2025 Sea-Doo Wake 170
2025 Sea-Doo Fish Pro Scout 130

Visit the Custom Features page to learn more about colors, textures, and more.

Enjoy The Amazing Luxury of Custom Decking

Upgrade your boat with stylish and functional EVA Foam Decking from Our Designs. Our EVA foam is a high performance, cushioned decking material that feels comfortable and stable underfoot. And with its stunning good looks, it adds a clean, high-end look to your vessel.

We use the best quality Grade A EVA environmental protection material

• 1. Elastic, not easy deformation, not easy to tear.
• 2. High Density, not easy to damage. Odorless, non-toxic.
• 3. Self-adhesion, easy to installation.
• 4. Stain resistant & very easy to maintain, can also be pressure washed.
• 5. Provides a non-slippery surface for your boat in both wet & dry conditions.

Product Description£º

1. Customized colors is available.
2. Customized thickness is available.
3. Customized size in you requirement.
4. Customized shape according to supply drawing.
5. Customized logo: We can make logo for your marine traction pad.

Application Guide:

2011-2019 Sea-Doo GTI SE 130

2011-2019 Sea-Doo GTI 130
2012-2019 Sea-Doo Wake 155
2013 Sea-Doo GTR 215
2013 Sea-Doo GTI SE 155
2013 Sea-Doo GTI Limited 155

Click here to contact us.

Enjoy The Amazing Luxury of Custom Decking

Upgrade your boat with stylish and functional EVA Foam Decking from Our?Designs. Our EVA foam is a high performance, cushioned decking material that feels comfortable and stable underfoot. And with its stunning good looks, it adds a clean, high-end look to your vessel.

We use the best quality Grade A EVA environmental protection material

• 1. Elastic, not easy deformation, not easy to tear.
• 2. High Density, not easy to damage. Odorless, non-toxic.
• 3. Self-adhesion, easy to installation.
• 4. Stain resistant & very easy to maintain, can also be pressure washed.
• 5. Provides a non-slippery surface for your boat in both wet & dry conditions.

Product Description:

1. Customized colors is available.
2. Customized thickness is available.
3. Customized size in you requirement.
4. Customized shape according to supply drawing.
5. Customized logo: We can make logo for your marine traction pad.

Application:

2011-2018 Sea-Doo GTI SE 130
2012-2019 Sea-Doo Wake 155
2013 Sea-Doo GTR 215
2013 Sea-Doo GTI SE 155
2013 Sea-Doo GTI Limited 155

Click here to contact us.

Crownline 216 2005 EVA Foam Faux Teak Boat Deck Mat Flooring Marine Boat Decking Carpet Yacht Pad

Notes:

Please confirm your boat type before adding to cart. If you are not sure if it fits your needs, you can contact us online or send us an email to confirm the size.

If you want to add logo or pattern, you can send JPG image to our email, we will design the pattern and send it to you for confirmation, of course you need to pay extra fee.

Description:

Material: EVA foam
Texture: Brushed / Embossed (Default Brushed)
Thickness: 6mm
Hardness: 60°- 65°
UV: ≥4.5G
Adhesive: 3M99786 (3M Self-Adhesive Backing - No need to buy glue)
If you need other colors, you can email eric@hjdeck.com, we are a factory and can realize the colors you want.

For Design:

1. We can design drawings according to customers' requirements (free of charge).

2. We can provide design drawings for your choice.

3. Support LOGO customization, need file, format file: DXF/AI/PDF/JPJ/PNG, etc.

Installation Notes:

1. Before installation the floor needs to be cleaned with acetone or alcohol (to remove the wax from the surface of the new boat) and make sure it is dry before starting the installation.
2. Lay all EVA flooring flat before installation. After confirming the position, tear off the adhesive backing on one corner and start the installation.
3. Fix the adhesive and do not move the EVA flooring.
4. Use the round wheel to roll during the installation process (you need to press the 5. LOGO position with your finger in advance to avoid air entry). If there is air generated, a small needle can be used to puncture the bubble exclusion.
Note: 48 hours after installation shall not be immersed in water.

Making Templates:

If we don't have a matching boat in our sales list, please provide us with a template and we can manufacture it according to your template requirements. More details of customized templates are available: https://www.hjdeck.com/pages/custom-features#section6

2019 Chaparral H20 Sport 21 ft EVA Foam Faux Teak Boat Deck MatteMarine Flooring Marine Boat Decking Carpet Yacht Pad

Notes:

Please confirm your boat type before adding to cart. If you are not sure if it fits your needs, you can contact us online or send us an email to confirm the size.

If you want to add logo or pattern, you can send JPG image to our email, we will design the pattern and send it to you for confirmation, of course you need to pay extra fee.

Description:

Material: EVA foam
Texture: Brushed / Embossed (Default Brushed)
Thickness: 6mm
Hardness: 60°- 65°
UV: ≥4.5G
Adhesive: 3M99786 (3M Self-Adhesive Backing - No need to buy glue)
If you need other colors, you can email eric@hjdeck.com, we are a factory and can realize the colors you want.

For Design:

1. We can design drawings according to customers' requirements (free of charge).

2. We can provide design drawings for your choice.

3. Support LOGO customization, need file, format file: DXF/AI/PDF/JPJ/PNG, etc.

Installation Notes:

1. Before installation the floor needs to be cleaned with acetone or alcohol (to remove the wax from the surface of the new boat) and make sure it is dry before starting the installation.
2. Lay all EVA flooring flat before installation. After confirming the position, tear off the adhesive backing on one corner and start the installation.
3. Fix the adhesive and do not move the EVA flooring.
4. Use the round wheel to roll during the installation process (you need to press the 5. LOGO position with your finger in advance to avoid air entry). If there is air generated, a small needle can be used to puncture the bubble exclusion.
Note: 48 hours after installation shall not be immersed in water.

Making Templates:

If we don't have a matching boat in our sales list, please provide us with a template and we can manufacture it according to your template requirements. More details of customized templates are available: https://www.hjdeck.com/pages/custom-features#section6

Description

Material thickness: 6 mm
Texture: Brushed / Faux Teak / Custom
Pattern: Support customization
Color: Various colors available

Customized for Engel 60QT Cooler

Do not attempt to retrofit to other coolers. If you need custom cutting or custom design, please contact us.

Hjdeck / 6mm / Dual Layer
Easy to Install / Peel and Stick / Pressure Sensitive Adhesive / UV Resistant / CNC Routed

( THIS IS A HJDECK PAD ONLY - COOLER IS NOT INCLUDED! )

Experience the ultimate in cooling comfort with the Engel 50 Cooler Pad. Constructed from high quality, weather, stain and mildew resistant Hjdeck EVA marine grade material, this Cooler Pad will stand up to the elements and will not fade. It is constructed with a double layer of 6mm non-absorbent EVA foam, perfect for marine applications, and will not absorb water.

Our pressure-sensitive adhesive design is easy to peel and stick, making installation a breeze and durable. A strong adhesive ensures that the liner stays securely in place, providing you with a reliable surface to sit or stand on your favorite cooler.

Enjoy a non-slip, comfortable surface that enhances your cooling experience. Additionally, Engel 50 Cooler Pads can be customized - contact us to learn more about other color options and custom design possibilities.

Enhance your cooling experience with Engel 60QT Cooler Pads today!