Newest Products

2010-2017 Malibu 247 LSV EVA Foam Faux Teak Boat Deck MatteMarine Flooring Marine Boat Decking Carpet Pad

Precautions

Please confirm your boat type before adding to the shopping cart. If you are not sure whether it meets your needs, you can contact us online or send us an email to confirm the size.

If you want to add your logo or want to add a pattern, you can send a JPG picture to our email, we will design a pattern and send it to you for confirmation, of course there will be a little extra cost that you need to pay.


Products information

Material: EVA foam
Thickness: 6mm
Hardness: 60°- 65°
Color: Teak Brown Black /Gray Black
Or if you need other colors, you can email us, we are a factory and can realize the colors you want
UV: ≥4.5G
Adhesive: 3M99786 （ Self-Adhesive Backing - No need to buy glue）

Application Guide:

2006 Malibu Wakesetter 247
2007 Malibu Wakesetter 247
2008 Malibu Wakesetter 247

Yamaha FX, HO, SVHO, LTD 2019-2023 Jet Ski Traction Mats

Application:

2025 YAMAHA FX CRUISER SVHO
2024 YAMAHA FX CRUISER SVHO
2023 YAMAHA FX CRUISER SVHO
2022 YAMAHA FX CRUISER SVHO
2021 YAMAHA FX CRUISER SVHO
2020 YAMAHA FX CRUISER SVHO
2019 YAMAHA FX CRUISER SVHO

2025 YAMAHA FX SVHO
2024 YAMAHA FX SVHO
2023 YAMAHA FX SVHO
2022 YAMAHA FX SVHO
2021 YAMAHA FX SVHO
2020 YAMAHA FX SVHO
2019 YAMAHA FX SVHO

2025 YAMAHA FX LTD SVHO
2024 YAMAHA FX LTD SVHO
2023 YAMAHA FX LTD SVHO
2022 YAMAHA FX LTD SVHO
2021 YAMAHA FX LTD SVHO
2020 YAMAHA FX LTD SVHO
2019 YAMAHA FX LTD SVHO

2023 YAMAHA FX CRUISER HO (1.8L)
2022 YAMAHA FX CRUISER HO (1.8L)
2021 YAMAHA FX CRUISER HO (1.8L)
2020 YAMAHA FX CRUISER HO (1.8L)
2019 YAMAHA FX CRUISER HO (1.8L)

2023 YAMAHA FX HO (1.8L)
2022 YAMAHA FX HO (1.8L)
2021 YAMAHA FX HO (1.8L)
2020 YAMAHA FX HO (1.8L)
2019 YAMAHA FX HO (1.8L)

- Upgrade your 2012-2018 Yamaha Waverunner FX with our Designs' premium EVA Foam Decking for a stylish and functional improvement.
- Crafted from Grade A EVA environmental protection material, our decking offers superior elasticity and high density, ensuring durability and stability for your boat.
- Easy to install with self-adhesive backing, this decking is odorless, non-toxic, and stain-resistant for hassle-free maintenance.
- Enjoy a non-slip surface in wet or dry conditions, providing added safety and comfort while out on the water.
- With a clean, high-end appearance, our DIY Jet Ski Traction Mats enhance both the look and performance of your vessel.

Product Description:

1. Customized colors is available.
2. Customized thickness is available.
3. Customized size in you requirement.
4. Customized shape according to supply drawing.
5. Customized logo: We can make logo for your marine traction pad.

Click here to contact us.

2006 Sea Ray 175 Sport (Single Latch Option) EVA Foam Faux Teak Boat Deck Mat Flooring Marine Decking Carpet Pad

Notes:

Please confirm your boat type before adding to cart. If you are not sure if it fits your needs, you can contact us online or send us an email to confirm the size.

If you want to add logo or pattern, you can send JPG image to our email, we will design the pattern and send it to you for confirmation, of course you need to pay extra fee.

Description:

Material: EVA foam
Texture: Brushed / Embossed (Default Brushed)
Thickness: 6mm
Hardness: 60°- 65°
UV: ≥4.5G
Adhesive: 3M99786 (3M Self-Adhesive Backing - No need to buy glue)
If you need other colors, you can email eric@hjdeck.com, we are a factory and can realize the colors you want.

For Design:

1. We can design drawings according to customers' requirements (free of charge).

2. We can provide design drawings for your choice.

3. Support LOGO customization, need file, format file: DXF/AI/PDF/JPJ/PNG, etc.

Installation Notes:

1. Before installation the floor needs to be cleaned with acetone or alcohol (to remove the wax from the surface of the new boat) and make sure it is dry before starting the installation.
2. Lay all EVA flooring flat before installation. After confirming the position, tear off the adhesive backing on one corner and start the installation.
3. Fix the adhesive and do not move the EVA flooring.
4. Use the round wheel to roll during the installation process (you need to press the 5. LOGO position with your finger in advance to avoid air entry). If there is air generated, a small needle can be used to puncture the bubble exclusion.
Note: 48 hours after installation shall not be immersed in water.

Making Templates:

If we don't have a matching boat in our sales list, please provide us with a template and we can manufacture it according to your template requirements. More details of customized templates are available:?https://www.hjdeck.com/pages/custom-features#section6

Honda 12 Jet Ski Traction Mats Custom Eva Foam Pad

Notes:

Please confirm your boat type before adding to cart. If you are not sure if it fits your needs, you can contact us online or send us an email to confirm the size.

If you want to add logo or pattern, you can send JPG image to our email, we will design the pattern and send it to you for confirmation, of course you need to pay extra fee.

Description:

Material: EVA foam
Thickness: 6mm
Hardness: 60°- 65°
UV: ≥4.5G
Adhesive: 3M99786 (3M Self-Adhesive Backing - No need to buy glue)
If you need other colors, you can email eric@hjdeck.com, we are a factory and can realize the colors you want.

? Customized colors is available.
? Customized thickness is available.
? Customized size in you requirement.
? Customized shape according to supply drawing.
? Customized logo: We can make logo for your marine traction pad.

Application Guide:

2007 Honda Aquatrax F-12 Traction Floor Mat Kit - Model ARX1200N3
2007 Honda Aquatrax F-12X Traction Floor Mat Kit - Model ARX1200T3
2007 Honda Aquatrax F-12X GPS Traction Floor Mat Kit - Model ARX1200T3D
2006 Honda Aquatrax F-12 Traction Floor Mat Kit - Model ARX1200N3
2006 Honda Aquatrax F-12X Traction Floor Mat Kit - Model ARX1200T3
2006 Honda Aquatrax F-12X GPS Traction Floor Mat Kit - Model ARX1200T3D
2005 Honda Aquatrax F-12 Traction Floor Mat Kit - Model ARX1200N3
2005 Honda Aquatrax F-12X Traction Floor Mat Kit - Model ARX1200T3
2005 Honda Aquatrax F-12X GPS Traction Floor Mat Kit - Model ARX1200T3D
2004 Honda Aquatrax F-12 Traction Floor Mat Kit - Model ARX1200N3
2004 Honda Aquatrax F-12X Traction Floor Mat Kit - Model ARX1200T3
2003 Honda Aquatrax F-12 Traction Floor Mat Kit - Model ARX1200N3
2003 Honda Aquatrax F-12X Traction Floor Mat Kit - Model ARX1200T3
2002 Honda Aquatrax F-12 Traction Floor Mat Kit - Model ARX1200N3
2002 Honda Aquatrax F-12X Traction Floor Mat Kit - Model ARX1200t3

2008-2009 Honda F15 F15X Jet Ski Traction Mats Custom Eva Foam Pad

Notes:

Please confirm your boat type before adding to cart. If you are not sure if it fits your needs, you can contact us online or send us an email to confirm the size.

If you want to add logo or pattern, you can send JPG image to our email, we will design the pattern and send it to you for confirmation, of course you need to pay extra fee.

Description:

Material: EVA foam
Thickness: 6mm
Hardness: 60°- 65°
UV: ≥4.5G
Adhesive: 3M99786 (3M Self-Adhesive Backing - No need to buy glue)
If you need other colors, you can email eric@hjdeck.com, we are a factory and can realize the colors you want.

? Customized colors is available.
? Customized thickness is available.
? Customized size in you requirement.
? Customized shape according to supply drawing.
? Customized logo: We can make logo for your marine traction pad.

Application Guide:

2008 Honda AquaTrax F-15
2008 Honda AquaTrax F-15X
2009 Honda AquaTrax F-15
2009 Honda AquaTrax F-15X

2006 Honda Aquatrax R-12 Traction Floor Mat Kit - Model ARX1200N2
2006 Honda Aquatrax R-12X Traction Floor Mat Kit - Model ARX1200T2
2005 Honda Aquatrax R-12 Traction Floor Mat Kit - Model ARX1200N2
2005 Honda Aquatrax R-12X Traction Floor Mat Kit - Model ARX1200T2
2004 Honda Aquatrax R-12 Traction Floor Mat Kit - Model ARX1200N2
2004 Honda Aquatrax R-12X Traction Floor Mat Kit - Model ARX1200T2
2003 Honda Aquatrax R-12X Traction Floor Mat Kit - Model ARX1200T2

1968 Correct Craft Mustang Cockpit Pad Marine-Grade Closed-Cell Foam Deck Mats

Notes:

Please confirm your boat type before adding to cart. If you are not sure if it fits your needs, you can contact us online or send us an email to confirm the size.

If you want to add logo or pattern, you can send JPG image to our email, we will design the pattern and send it to you for confirmation, of course you need to pay extra fee.

Description:

Material: EVA foam
Texture: Brushed / Embossed (Default Brushed)
Thickness: 6mm
Hardness: 60°- 65°
UV: ≥4.5G
Adhesive: 3M99786 (3M Self-Adhesive Backing - No need to buy glue)
If you need other colors, you can email eric@hjdeck.com, we are a factory and can realize the colors you want.

For Design:

1. We can design drawings according to customers' requirements (free of charge).

2. We can provide design drawings for your choice.

3. Support LOGO customization, need file, format file: DXF/AI/PDF/JPJ/PNG, etc.

Installation Notes:

1. Before installation the floor needs to be cleaned with acetone or alcohol (to remove the wax from the surface of the new boat) and make sure it is dry before starting the installation.
2. Lay all EVA flooring flat before installation. After confirming the position, tear off the adhesive backing on one corner and start the installation.
3. Fix the adhesive and do not move the EVA flooring.
4. Use the round wheel to roll during the installation process (you need to press the 5. LOGO position with your finger in advance to avoid air entry). If there is air generated, a small needle can be used to puncture the bubble exclusion.
Note: 48 hours after installation shall not be immersed in water.

Making Templates:

If we don't have a matching boat in our sales list, please provide us with a template and we can manufacture it according to your template requirements. More details of customized templates are available:?https://www.hjdeck.com/pages/custom-features#section6

Mariah 272 Cockpit Pad?Marine-Grade Closed-Cell Foam Deck Mats

Notes:

Please confirm your boat type before adding to cart. If you are not sure if it fits your needs, you can contact us online or send us an email to confirm the size.

If you want to add logo or pattern, you can send JPG image to our email, we will design the pattern and send it to you for confirmation, of course you need to pay extra fee.

Description:

Material: EVA foam
Texture: Brushed / Embossed (Default Brushed)
Thickness: 6mm
Hardness: 60°- 65°
UV: ≥4.5G
Adhesive: 3M99786 (3M Self-Adhesive Backing - No need to buy glue)
If you need other colors, you can email eric@hjdeck.com, we are a factory and can realize the colors you want.

For Design:

1. We can design drawings according to customers' requirements (free of charge).

2. We can provide design drawings for your choice.

3. Support LOGO customization, need file, format file: DXF/AI/PDF/JPJ/PNG, etc.

Installation Notes:

1. Before installation the floor needs to be cleaned with acetone or alcohol (to remove the wax from the surface of the new boat) and make sure it is dry before starting the installation.
2. Lay all EVA flooring flat before installation. After confirming the position, tear off the adhesive backing on one corner and start the installation.
3. Fix the adhesive and do not move the EVA flooring.
4. Use the round wheel to roll during the installation process (you need to press the 5. LOGO position with your finger in advance to avoid air entry). If there is air generated, a small needle can be used to puncture the bubble exclusion.
Note: 48 hours after installation shall not be immersed in water.

Making Templates:

If we don't have a matching boat in our sales list, please provide us with a template and we can manufacture it according to your template requirements. More details of customized templates are available:?https://www.hjdeck.com/pages/custom-features#section6

1978 Trojan 32 EVA Foam Faux Teak Boat Deck Mat Flooring Marine Decking Carpet Pad

Notes:

Please confirm your boat type before adding to cart. If you are not sure if it fits your needs, you can contact us online or send us an email to confirm the size.

If you want to add logo or pattern, you can send JPG image to our email, we will design the pattern and send it to you for confirmation, of course you need to pay extra fee.

Description:

Material: EVA foam
Texture: Brushed / Embossed (Default Brushed)
Thickness: 6mm
Hardness: 60°- 65°
UV: ≥4.5G
Adhesive: 3M99786 (3M Self-Adhesive Backing - No need to buy glue)
If you need other colors, you can email eric@hjdeck.com, we are a factory and can realize the colors you want.

For Design:

1. We can design drawings according to customers' requirements (free of charge).

2. We can provide design drawings for your choice.

3. Support LOGO customization, need file, format file: DXF/AI/PDF/JPJ/PNG, etc.

Installation Notes:

1. Before installation the floor needs to be cleaned with acetone or alcohol (to remove the wax from the surface of the new boat) and make sure it is dry before starting the installation.
2. Lay all EVA flooring flat before installation. After confirming the position, tear off the adhesive backing on one corner and start the installation.
3. Fix the adhesive and do not move the EVA flooring.
4. Use the round wheel to roll during the installation process (you need to press the 5. LOGO position with your finger in advance to avoid air entry). If there is air generated, a small needle can be used to puncture the bubble exclusion.
Note: 48 hours after installation shall not be immersed in water.

Making Templates:

If we don't have a matching boat in our sales list, please provide us with a template and we can manufacture it according to your template requirements. More details of customized templates are available:?https://www.hjdeck.com/pages/custom-features#section6

2000 Donzi 38' ZX EVA Foam Faux Teak Boat Deck Mat Flooring Marine Decking Carpet Pad

Notes:

Please confirm your boat type before adding to cart. If you are not sure if it fits your needs, you can contact us online or send us an email to confirm the size.

If you want to add logo or pattern, you can send JPG image to our email, we will design the pattern and send it to you for confirmation, of course you need to pay extra fee.

Description:

Material: EVA foam
Texture: Brushed / Embossed (Default Brushed)
Thickness: 6mm
Hardness: 60°- 65°
UV: ≥4.5G
Adhesive: 3M99786 (3M Self-Adhesive Backing - No need to buy glue)
If you need other colors, you can email eric@hjdeck.com, we are a factory and can realize the colors you want.

Application Guide:

For Design:

1. We can design drawings according to customers' requirements (free of charge).

2. We can provide design drawings for your choice.

3. Support LOGO customization, need file, format file: DXF/AI/PDF/JPJ/PNG, etc.

Installation Notes:

1. Before installation the floor needs to be cleaned with acetone or alcohol (to remove the wax from the surface of the new boat) and make sure it is dry before starting the installation.
2. Lay all EVA flooring flat before installation. After confirming the position, tear off the adhesive backing on one corner and start the installation.
3. Fix the adhesive and do not move the EVA flooring.
4. Use the round wheel to roll during the installation process (you need to press the 5. LOGO position with your finger in advance to avoid air entry). If there is air generated, a small needle can be used to puncture the bubble exclusion.
Note: 48 hours after installation shall not be immersed in water.

Making Templates:

If we don't have a matching boat in our sales list, please provide us with a template and we can manufacture it according to your template requirements. More details of customized templates are available:?https://www.hjdeck.com/pages/custom-features#section6

1999 SeaRay 230 Signature EVA Foam Faux Teak Boat Deck Mat Flooring Marine Decking Carpet Pad

Notes:

Please confirm your boat type before adding to cart. If you are not sure if it fits your needs, you can contact us online or send us an email to confirm the size.

If you want to add logo or pattern, you can send JPG image to our email, we will design the pattern and send it to you for confirmation, of course you need to pay extra fee.

Description:

Material: EVA foam
Texture: Brushed / Embossed (Default Brushed)
Thickness: 6mm
Hardness: 60°- 65°
UV: ≥4.5G
Adhesive: 3M99786 (3M Self-Adhesive Backing - No need to buy glue)
If you need other colors, you can email eric@hjdeck.com, we are a factory and can realize the colors you want.

?

For Design:

1. We can design drawings according to customers' requirements (free of charge).

2. We can provide design drawings for your choice.

3. Support LOGO customization, need file, format file: DXF/AI/PDF/JPJ/PNG, etc.

Installation Notes:

1. Before installation the floor needs to be cleaned with acetone or alcohol (to remove the wax from the surface of the new boat) and make sure it is dry before starting the installation.
2. Lay all EVA flooring flat before installation. After confirming the position, tear off the adhesive backing on one corner and start the installation.
3. Fix the adhesive and do not move the EVA flooring.
4. Use the round wheel to roll during the installation process (you need to press the 5. LOGO position with your finger in advance to avoid air entry). If there is air generated, a small needle can be used to puncture the bubble exclusion.
Note: 48 hours after installation shall not be immersed in water.

Making Templates:

If we don't have a matching boat in our sales list, please provide us with a template and we can manufacture it according to your template requirements. More details of customized templates are available:?https://www.hjdeck.com/pages/custom-features#section6