All

2005 Cobalt 246 EVA Foam Precut Boat Flooring Kit – Custom-Fit Marine Decking

Important Fitment Information

Please confirm your boat’s year, make, model, and deck layout before placing your order. Boat layouts may vary even within the same model year.

If you are unsure whether this precut boat flooring kit will fit your boat, please contact us through online chat or email before ordering. We will help you verify the fitment and dimensions.

Product Specifications

Material: Marine-grade EVA foam
Thickness: 6 mm
Hardness: 60°–65°
Standard Colors: Teak Brown over Black / Gray over Black
UV Resistance: ≥4.5G
Backing: Strong self-adhesive backing
Installation: Peel and stick—no additional glue required
Custom Colors Available

Need a different color combination? Contact us by email to discuss your requirements. As a direct manufacturer, we can provide a wide selection of custom colors and combinations.

Please Note

Customized products are made according to the specifications approved by the customer. Please carefully review the fitment, dimensions, colors, logo, and design preview before confirming your order.

2003 Cobalt 246 EVA Foam Precut Boat Flooring Kit – Custom-Fit Marine Decking

Important Fitment Information

Please confirm your boat’s year, make, model, and deck layout before placing your order. Boat layouts may vary even within the same model year.

If you are unsure whether this precut boat flooring kit will fit your boat, please contact us through online chat or email before ordering. We will help you verify the fitment and dimensions.

Product Specifications

Material: Marine-grade EVA foam
Thickness: 6 mm
Hardness: 60°–65°
Standard Colors: Teak Brown over Black / Gray over Black
UV Resistance: ≥4.5G
Backing: Strong self-adhesive backing
Installation: Peel and stick—no additional glue required
Custom Colors Available

Need a different color combination? Contact us by email to discuss your requirements. As a direct manufacturer, we can provide a wide selection of custom colors and combinations.

Please Note

Customized products are made according to the specifications approved by the customer. Please carefully review the fitment, dimensions, colors, logo, and design preview before confirming your order.

2002 Cobalt 246 EVA Foam Precut Boat Flooring Kit – Custom-Fit Marine Decking

Important Fitment Information

Please confirm your boat’s year, make, model, and deck layout before placing your order. Boat layouts may vary even within the same model year.

If you are unsure whether this precut boat flooring kit will fit your boat, please contact us through online chat or email before ordering. We will help you verify the fitment and dimensions.

Product Specifications

Material: Marine-grade EVA foam
Thickness: 6 mm
Hardness: 60°–65°
Standard Colors: Teak Brown over Black / Gray over Black
UV Resistance: ≥4.5G
Backing: Strong self-adhesive backing
Installation: Peel and stick—no additional glue required
Custom Colors Available

Need a different color combination? Contact us by email to discuss your requirements. As a direct manufacturer, we can provide a wide selection of custom colors and combinations.

Please Note

Customized products are made according to the specifications approved by the customer. Please carefully review the fitment, dimensions, colors, logo, and design preview before confirming your order.

2007 Crownline 230 LS EVA Foam Faux Teak Boat Deck MatteMarine Flooring Marine Boat Decking Carpet Leaf Yacht Vehicle Pad

Precautions

Please confirm your boat type before adding to the shopping cart. If you are not sure whether it meets your needs, you can contact us online or send us an email to confirm the size.

If you want to add your logo or want to add a pattern, you can send a JPG picture to our email, we will design a pattern and send it to you for confirmation, of course there will be a little extra cost that you need to pay.


Products information

Material: EVA foam
Thickness: 6mm
Hardness: 60°- 65°
Color：Teak Brown Black /Gray Black
Or if you need other colors, you can email us, we are a factory and can realize the colors you want
UV: ≥4.5G
Adhesive: Self-Adhesive Backing - No need to buy glue

Crownline 230 LS EVA Foam Faux Teak Boat Deck MatteMarine Flooring Marine Boat Decking Carpet Leaf Yacht Vehicle Pad

Precautions

Please confirm your boat type before adding to the shopping cart. If you are not sure whether it meets your needs, you can contact us online or send us an email to confirm the size.

If you want to add your logo or want to add a pattern, you can send a JPG picture to our email, we will design a pattern and send it to you for confirmation, of course there will be a little extra cost that you need to pay.


Products information

Material: EVA foam
Thickness: 6mm
Hardness: 60°- 65°
Color：Teak Brown Black /Gray Black
Or if you need other colors, you can email us, we are a factory and can realize the colors you want
UV: ≥4.5G
Adhesive: Self-Adhesive Backing - No need to buy glue

2002-2005 Four winns 214 Funship EVA Foam Faux Teak Boat Deck MatteMarine Flooring Marine Boat Decking Pad

Notes:

Please confirm your boat type before adding to cart. If you are not sure if it fits your needs, you can contact us online or send us an email to confirm the size.

If you want to add logo or pattern, you can send JPG image to our email, we will design the pattern and send it to you for confirmation, of course you need to pay extra fee.

Description:

Material: EVA foam
Thickness: 6mm
Hardness: 60°- 65°
UV: ≥4.5G
Adhesive: Self-Adhesive Backing
If you need other colors, you can email eric@hjdeck.com, we are a factory and can realize the colors you want.

1. Customized colors is available.
2. Customized thickness is available.
3. Customized size in you requirement.
4. Customized shape according to supply drawing.
5. Customized logo: We can make logo for your marine flooring.

2004 Sea Ray 240 Sun Sport EVA Foam Faux Teak Boat Deck MatteMarine Flooring Marine Boat Decking Carpet Pad

Notes:

Please confirm your boat type before adding to cart. If you are not sure if it fits your needs, you can contact us online or send us an email to confirm the size.

If you want to add logo or pattern, you can send JPG image to our email, we will design the pattern and send it to you for confirmation, of course you need to pay extra fee.

Description:

Material: EVA foam
Texture: Brushed / Embossed (Default Brushed)
Thickness: 6mm
Hardness: 60°- 65°
UV: ≥4.5G
Adhesive: Self-Adhesive Backing
If you need other colors, you can email eric@hjdeck.com, we are a factory and can realize the colors you want.

For Design:

1. We can design drawings according to customers' requirements (free of charge).

2. We can provide design drawings for your choice.

3. Support LOGO customization, need file, format file: DXF/AI/PDF/JPJ/PNG, etc.

Installation Notes:

1. Before installation the floor needs to be cleaned with acetone or alcohol (to remove the wax from the surface of the new boat) and make sure it is dry before starting the installation.
2. Lay all EVA flooring flat before installation. After confirming the position, tear off the adhesive backing on one corner and start the installation.
3. Fix the adhesive and do not move the EVA flooring.
4. Use the round wheel to roll during the installation process (you need to press the 5. LOGO position with your finger in advance to avoid air entry). If there is air generated, a small needle can be used to puncture the bubble exclusion.
Note: 48 hours after installation shall not be immersed in water.

Making Templates:

If we don't have a matching boat in our sales list, please provide us with a template and we can manufacture it according to your template requirements. More details of customized templates are available:https://www.hjdeck.com/pages/custom-features#section6

2001 Monterey Explorer 240 EVA Foam Faux Teak Boat Deck MatteMarine Flooring Marine Boat Decking Pad

Notes:

Please confirm your boat type before adding to cart. If you are not sure if it fits your needs, you can contact us online or send us an email to confirm the size.

If you want to add logo or pattern, you can send JPG image to our email, we will design the pattern and send it to you for confirmation, of course you need to pay extra fee.

Description:

Material: EVA foam
Texture: Brushed / Embossed (Default Brushed)
Thickness: 6mm
Hardness: 60°- 65°
UV: ≥4.5G
Adhesive: Self-Adhesive Backing
If you need other colors, you can email eric@hjdeck.com, we are a factory and can realize the colors you want.

For Design:

1. We can design drawings according to customers' requirements (free of charge).

2. We can provide design drawings for your choice.

3. Support LOGO customization, need file, format file: DXF/AI/PDF/JPJ/PNG, etc.

Installation Notes:

1. Before installation the floor needs to be cleaned with acetone or alcohol (to remove the wax from the surface of the new boat) and make sure it is dry before starting the installation.
2. Lay all EVA flooring flat before installation. After confirming the position, tear off the adhesive backing on one corner and start the installation.
3. Fix the adhesive and do not move the EVA flooring.
4. Use the round wheel to roll during the installation process (you need to press the 5. LOGO position with your finger in advance to avoid air entry). If there is air generated, a small needle can be used to puncture the bubble exclusion.
Note: 48 hours after installation shall not be immersed in water.

Making Templates:

If we don't have a matching boat in our sales list, please provide us with a template and we can manufacture it according to your template requirements. More details of customized templates are available:?https://www.hjdeck.com/pages/custom-features#section6

2012 Sea Ray 210 SLX EVA Foam Faux Teak Boat Deck MatteMarine Flooring Marine Boat Decking

Notes:

Please confirm your boat type before adding to cart. If you are not sure if it fits your needs, you can contact us online or send us an email to confirm the size.

If you want to add logo or pattern, you can send JPG image to our email, we will design the pattern and send it to you for confirmation, of course you need to pay extra fee.

Description:

Material: EVA foam
Texture: Brushed / Embossed (Default Brushed)
Thickness: 6mm
Hardness: 60°- 65°
UV: ≥4.5G
Adhesive: Self-Adhesive Backing
If you need other colors, you can email eric@hjdeck.com, we are a factory and can realize the colors you want.

For Design:

1. We can design drawings according to customers' requirements (free of charge).

2. We can provide design drawings for your choice.

3. Support LOGO customization, need file, format file: DXF/AI/PDF/JPJ/PNG, etc.

Installation Notes:

1. Before installation the floor needs to be cleaned with acetone or alcohol (to remove the wax from the surface of the new boat) and make sure it is dry before starting the installation.
2. Lay all EVA flooring flat before installation. After confirming the position, tear off the adhesive backing on one corner and start the installation.
3. Fix the adhesive and do not move the EVA flooring.
4. Use the round wheel to roll during the installation process (you need to press the 5. LOGO position with your finger in advance to avoid air entry). If there is air generated, a small needle can be used to puncture the bubble exclusion.
Note: 48 hours after installation shall not be immersed in water.

Making Templates:

If we don't have a matching boat in our sales list, please provide us with a template and we can manufacture it according to your template requirements. More details of customized templates are available:https://www.hjdeck.com/pages/custom-features#section6

2006 Sea Ray 44 DA EVA Foam Faux Teak Boat Deck MatteMarine Flooring Marine Boat Decking Carpet Yacht Vehicle Pad

Notes:

Please confirm your boat type before adding to cart. If you are not sure if it fits your needs, you can contact us online or send us an email to confirm the size.

If you want to add logo or pattern, you can send JPG image to our email, we will design the pattern and send it to you for confirmation, of course you need to pay extra fee.

Description:

Material: EVA foam
Texture: Brushed / Embossed (Default Brushed)
Thickness: 6mm
Hardness: 60°- 65°
UV: ≥4.5G
Adhesive: Self-Adhesive Backing
If you need other colors, you can email eric@hjdeck.com, we are a factory and can realize the colors you want.

For Design:

1. We can design drawings according to customers' requirements (free of charge).

2. We can provide design drawings for your choice.

3. Support LOGO customization, need file, format file: DXF/AI/PDF/JPJ/PNG, etc.

Installation Notes:

1. Before installation the floor needs to be cleaned with acetone or alcohol (to remove the wax from the surface of the new boat) and make sure it is dry before starting the installation.
2. Lay all EVA flooring flat before installation. After confirming the position, tear off the adhesive backing on one corner and start the installation.
3. Fix the adhesive and do not move the EVA flooring.
4. Use the round wheel to roll during the installation process (you need to press the 5. LOGO position with your finger in advance to avoid air entry). If there is air generated, a small needle can be used to puncture the bubble exclusion.
Note: 48 hours after installation shall not be immersed in water.

Making Templates:

If we don't have a matching boat in our sales list, please provide us with a template and we can manufacture it according to your template requirements. More details of customized templates are available:?https://www.hjdeck.com/pages/custom-features#section6