All

Specification:

3 Piece Cut
Unidirectional Nose - Tail Diamond Groove Pattern
25mm 45/90 Contoured Tail Kick
8mm Low Oval Arch
11.5" Wide x 14" Long
6" Wide at Tail

Features:

Made from lightweight thermoformed EVA foam, the Hjdeck features a three-piece design with perforated points and clear channels to reduce weight. Its ultra-thin design gives you maximum board feel in turns, allowing you to feel more in control and connected to the board.

MAXIMUM CONTROL AND COMFORT - Push the limits for maximum speed and power by turning the tail into a pliable double side channel grip sweet spot that you can ride confidently and comfortably on your wakeboard, skateboard, kiteboard or wakeboard.

TECHNICAL KICKS - Surf kicks are 45 degrees to the vertical to lock your feet in place and minimize falls.The beveled edges on the 28mm high surf kick pads reduce drag and increase speed, perfect for all types of waves.

Fits all surfboards - Surf Traction Pad is 12 inches wide x 12 inches high x 5 millimeters thick with an additional 8 millimeter arch. Can be used as a traction pad for wakeboards or fish, or as a grip pad for any longboard or surfboard.

GUARANTEED GRIP - Ultra-strong 3M green adhesive permanently bonds to surfboards with just the right amount of prep work. Designed by two professional surfers in California who stand behind their product. If your surfboard or skateboard is not working for any reason, drop us a line and we'll take care of you. Let's surf together!

2021-2025 Yamaha VX-C, VX CRUISER/HO/DELUXE Jet Ski Traction Mats

Application:

2021-2025 Yamaha VX (TR-1)
2021-2025 Yamaha VX Cruiser (TR-1)
2021-2025 Yamaha VX Deluxe (TR-1)
2021-2025 Yamaha VX Limited (TR-1)
2021-2025 Yamaha VX-C (TR-1)
2021-2023 Yamaha VX Cruiser HO (1.8L)
2024-2025 Yamaha VX Cruiser HO (1.9L)
2021-2023 Yamaha VX Limited HO (1.8L)
2024-2025 Yamaha VX Limited HO (1.9L)

Product Description:

1. Customized colors is available.
2. Customized thickness is available.
3. Customized size in you requirement.
4. Customized shape according to supply drawing.
5. Customized logo: We can make logo for your marine traction pad.

Click here to contact us.

2009 Chaparral 244 Sunesta EVA Foam Faux Teak Boat Deck MatteMarine Flooring Marine Boat Decking Carpet Leaf Yacht Vehicle Pad

Application Guide:

2008 Chaparral 244 Sunesta
2009 Chaparral 244 Sunesta

Notes:

Please confirm your boat type before adding to cart. If you are not sure if it fits your needs, you can contact us online or send us an email to confirm the size.

If you want to add logo or pattern, you can send JPG image to our email, we will design the pattern and send it to you for confirmation, of course you need to pay extra fee.

Description:

Material: EVA foam
Texture: Brushed / Embossed (Default Brushed)
Thickness: 6mm
Hardness: 60°- 65°
UV: ≥4.5G
Adhesive: 3M99786 (3M Self-Adhesive Backing - No need to buy glue)
If you need other colors, you can email eric@hjdeck.com, we are a factory and can realize the colors you want.

For Design:

1. We can design drawings according to customers' requirements (free of charge).

2. We can provide design drawings for your choice.

3. Support LOGO customization, need file, format file: DXF/AI/PDF/JPJ/PNG, etc.

Installation Notes:

1. Before installation the floor needs to be cleaned with acetone or alcohol (to remove the wax from the surface of the new boat) and make sure it is dry before starting the installation.
2. Lay all EVA flooring flat before installation. After confirming the position, tear off the adhesive backing on one corner and start the installation.
3. Fix the adhesive and do not move the EVA flooring.
4. Use the round wheel to roll during the installation process (you need to press the 5. LOGO position with your finger in advance to avoid air entry). If there is air generated, a small needle can be used to puncture the bubble exclusion.
Note: 48 hours after installation shall not be immersed in water.

Making Templates:

If we don't have a matching boat in our sales list, please provide us with a template and we can manufacture it according to your template requirements. More details of customized templates are available:?https://www.hjdeck.com/pages/custom-features#section6

2015 Rinker Captiva 196?Swim Platform EVA Foam Faux Teak Boat Deck MatteMarine Flooring Marine Boat Decking

Notes:

Please confirm your boat type before adding to cart. If you are not sure if it fits your needs, you can contact us online or send us an email to confirm the size.

If you want to add logo or pattern, you can send JPG image to our email, we will design the pattern and send it to you for confirmation, of course you need to pay extra fee.

Description:

Material: EVA foam
Texture: Brushed / Embossed (Default Brushed)
Thickness: 6mm
Hardness: 60°- 65°
UV: ≥4.5G
Adhesive: 3M99786 (3M Self-Adhesive Backing - No need to buy glue)
If you need other colors, you can email eric@hjdeck.com, we are a factory and can realize the colors you want.

For Design:

1. We can design drawings according to customers' requirements (free of charge).

2. We can provide design drawings for your choice.

3. Support LOGO customization, need file, format file: DXF/AI/PDF/JPJ/PNG, etc.

Installation Notes:

1. Before installation the floor needs to be cleaned with acetone or alcohol (to remove the wax from the surface of the new boat) and make sure it is dry before starting the installation.
2. Lay all EVA flooring flat before installation. After confirming the position, tear off the adhesive backing on one corner and start the installation.
3. Fix the adhesive and do not move the EVA flooring.
4. Use the round wheel to roll during the installation process (you need to press the 5. LOGO position with your finger in advance to avoid air entry). If there is air generated, a small needle can be used to puncture the bubble exclusion.
Note: 48 hours after installation shall not be immersed in water.

Making Templates:

If we don't have a matching boat in our sales list, please provide us with a template and we can manufacture it according to your template requirements. More details of customized templates are available:?https://www.hjdeck.com/pages/custom-features#section6

Application Guide:

2000-2011 Rinker Captiva 262 Cuddy

2014-2018 Monterey 268 SS EVA Foam Faux Teak Boat Deck Mat Flooring Marine Boat Decking Pad

Application Guide:

2014 Monterey 268 SS
2015 Monterey 268 SS
2016 Monterey 268 SS
2017 Monterey 268 SS
2018 Monterey 268 SS

Notes:

Please confirm your boat type before adding to cart. If you are not sure if it fits your needs, you can contact us online or send us an email to confirm the size.

If you want to add logo or pattern, you can send JPG image to our email, we will design the pattern and send it to you for confirmation, of course you need to pay extra fee.

Description:

Material: EVA foam
Texture: Brushed / Embossed (Default Brushed)
Thickness: 6mm
Hardness: 60°- 65°
UV: ≥4.5G
Adhesive: 3M99786 (3M Self-Adhesive Backing - No need to buy glue)
If you need other colors, you can email eric@hjdeck.com, we are a factory and can realize the colors you want.

For Design:

1. We can design drawings according to customers' requirements (free of charge).

2. We can provide design drawings for your choice.

3. Support LOGO customization, need file, format file: DXF/AI/PDF/JPJ/PNG, etc.

Installation Notes:

1. Before installation the floor needs to be cleaned with acetone or alcohol (to remove the wax from the surface of the new boat) and make sure it is dry before starting the installation.
2. Lay all EVA flooring flat before installation. After confirming the position, tear off the adhesive backing on one corner and start the installation.
3. Fix the adhesive and do not move the EVA flooring.
4. Use the round wheel to roll during the installation process (you need to press the 5. LOGO position with your finger in advance to avoid air entry). If there is air generated, a small needle can be used to puncture the bubble exclusion.
Note: 48 hours after installation shall not be immersed in water.

Making Templates:

If we don't have a matching boat in our sales list, please provide us with a template and we can manufacture it according to your template requirements. More details of customized templates are available:?https://www.hjdeck.com/pages/custom-features#section6

2010-2015 Sea Ray 260 Sundeck EVA Foam Faux Teak Boat Deck MatteMarine Flooring Marine Boat Decking

Notes:

Please confirm your boat type before adding to cart. If you are not sure if it fits your needs, you can contact us online or send us an email to confirm the size.

If you want to add logo or pattern, you can send JPG image to our email, we will design the pattern and send it to you for confirmation, of course you need to pay extra fee.

Description:

Material: EVA foam
Texture: Brushed / Embossed (Default Brushed)
Thickness: 6mm
Hardness: 60°- 65°
UV: ≥4.5G
Adhesive: 3M99786 (3M Self-Adhesive Backing - No need to buy glue)
If you need other colors, you can email eric@hjdeck.com, we are a factory and can realize the colors you want.

For Design:

1. We can design drawings according to customers' requirements (free of charge).

2. We can provide design drawings for your choice.

3. Support LOGO customization, need file, format file: DXF/AI/PDF/JPJ/PNG, etc.

Installation Notes:

1. Before installation the floor needs to be cleaned with acetone or alcohol (to remove the wax from the surface of the new boat) and make sure it is dry before starting the installation.
2. Lay all EVA flooring flat before installation. After confirming the position, tear off the adhesive backing on one corner and start the installation.
3. Fix the adhesive and do not move the EVA flooring.
4. Use the round wheel to roll during the installation process (you need to press the 5. LOGO position with your finger in advance to avoid air entry). If there is air generated, a small needle can be used to puncture the bubble exclusion.
Note: 48 hours after installation shall not be immersed in water.

Making Templates:

If we don't have a matching boat in our sales list, please provide us with a template and we can manufacture it according to your template requirements. More details of customized templates are available:?https://www.hjdeck.com/pages/custom-features#section6

2001 Monterey 248 LS?EVA Foam Faux Teak Boat Deck Mat Flooring Marine Boat Decking Pad

Application Guide:

2001 Monterey Montura 248 LS
2002 Monterey Montura 248 LS
2003 Monterey Montura 248 LS
2004 Monterey Montura 248 LS
2005 Monterey Montura 248 LS
2006 Monterey Montura 248 LS
2007 Monterey Montura 248 LS
2008 Monterey Montura 248 LS
2009 Monterey Montura 248 LS

Notes:

Please confirm your boat type before adding to cart. If you are not sure if it fits your needs, you can contact us online or send us an email to confirm the size.

If you want to add logo or pattern, you can send JPG image to our email, we will design the pattern and send it to you for confirmation, of course you need to pay extra fee.

Description:

Material: EVA foam
Texture: Brushed / Embossed (Default Brushed)
Thickness: 6mm
Hardness: 60°- 65°
UV: ≥4.5G
Adhesive: 3M99786 (3M Self-Adhesive Backing - No need to buy glue)
If you need other colors, you can email eric@hjdeck.com, we are a factory and can realize the colors you want.

For Design:

1. We can design drawings according to customers' requirements (free of charge).

2. We can provide design drawings for your choice.

3. Support LOGO customization, need file, format file: DXF/AI/PDF/JPJ/PNG, etc.

Installation Notes:

1. Before installation the floor needs to be cleaned with acetone or alcohol (to remove the wax from the surface of the new boat) and make sure it is dry before starting the installation.
2. Lay all EVA flooring flat before installation. After confirming the position, tear off the adhesive backing on one corner and start the installation.
3. Fix the adhesive and do not move the EVA flooring.
4. Use the round wheel to roll during the installation process (you need to press the 5. LOGO position with your finger in advance to avoid air entry). If there is air generated, a small needle can be used to puncture the bubble exclusion.
Note: 48 hours after installation shall not be immersed in water.

Making Templates:

If we don't have a matching boat in our sales list, please provide us with a template and we can manufacture it according to your template requirements. More details of customized templates are available:?https://www.hjdeck.com/pages/custom-features#section6

Hjdeck Custom Cooler Pad Top

This custom cooler pad product is designed to fit existing Yeti? and RTIC? cooler tops. If you have another brand, please contact us. We offer high quality foam pad material in over 12 colors for you to choose from! We can't wait to make your custom foam pad cooler top unique to you.

If you select "Custom" and fill in your name, you will receive an email with the design within 3 business days.

Please fill in the correct email address during checkout or you will not be able to view this design! Please call us if you have any questions.

Description:

Material: EVA foam
Texture: Brushed / Embossed (Default Brushed)
Thickness: 6mm
Hardness: 60°- 65°
UV: ≥4.5G
Adhesive: 3M99786 (3M Self-Adhesive Backing - No need to buy glue)
Warranty: 3 year
If you need other colors, you can email eric@hjdeck.com, we are a factory and can realize the colors you want.

1. Customized colors is available.
2. Customized thickness is available.
3. Customized size in you requirement.
4. Customized shape according to supply drawing.
5. Customized logo: We can make logo for your cooler pad.

Click here to contact us.

2013 Monterey 224 FSC EVA Foam Faux Teak Boat Deck MatteMarine Flooring Marine Boat Decking Pad

Notes:

Please confirm your boat type before adding to cart. If you are not sure if it fits your needs, you can contact us online or send us an email to confirm the size.

If you want to add logo or pattern, you can send JPG image to our email, we will design the pattern and send it to you for confirmation, of course you need to pay extra fee.

Description:

Material: EVA foam
Texture: Brushed / Embossed (Default Brushed)
Thickness: 6mm
Hardness: 60°- 65°
UV: ≥4.5G
Adhesive: 3M99786 (3M Self-Adhesive Backing - No need to buy glue)
If you need other colors, you can email eric@hjdeck.com, we are a factory and can realize the colors you want.

For Design:

1. We can design drawings according to customers' requirements (free of charge).

2. We can provide design drawings for your choice.

3. Support LOGO customization, need file, format file: DXF/AI/PDF/JPJ/PNG, etc.

Installation Notes:

1. Before installation the floor needs to be cleaned with acetone or alcohol (to remove the wax from the surface of the new boat) and make sure it is dry before starting the installation.
2. Lay all EVA flooring flat before installation. After confirming the position, tear off the adhesive backing on one corner and start the installation.
3. Fix the adhesive and do not move the EVA flooring.
4. Use the round wheel to roll during the installation process (you need to press the 5. LOGO position with your finger in advance to avoid air entry). If there is air generated, a small needle can be used to puncture the bubble exclusion.
Note: 48 hours after installation shall not be immersed in water.

Making Templates:

If we don't have a matching boat in our sales list, please provide us with a template and we can manufacture it according to your template requirements. More details of customized templates are available:?https://www.hjdeck.com/pages/custom-features#section6

Application Guide:

2011 Monterey 224 FS
2012 Monterey 224 FS
2013 Monterey 224 FS
2014 Monterey 224 FS
2015 Monterey 224 FS

2022-2025 Sea-Doo Fish Pro Scout 130 Traction Mats

Notes:

1. Please note: If your jet ski comes with a Sea-Doo or other brand sound system, please remove it, install the traction pads, and then reinstall it.

2. Please confirm your boat type before adding to cart. If you are not sure if it fits your needs, you can contact us online or send us an email to confirm the size.

3. If you want to add logo or pattern, you can send JPG image to our email, we will design the pattern and send it to you for confirmation, of course you need to pay extra fee.

Description:

Material: EVA foam
Thickness: 6mm
Hardness: 60°- 65°
UV: ≥4.5G
Adhesive: 3M99786 (3M Self-Adhesive Backing - No need to buy glue)
If you need other colors, you can email eric@hjdeck.com, we are a factory and can realize the colors you want.

? Customized colors is available.
? Customized thickness is available.
? Customized size in you requirement.
? Customized shape according to supply drawing.
? Customized logo: We can make logo for your marine traction pad.

Application Guide:

2020 Sea-Doo GTI 130
2020 Sea-Doo GTI SE 130
2020 Sea-Doo GTR 230
2020 Sea-Doo GTI 90
2020 Sea-Doo GTI SE 170
2020 Sea-Doo Wake 170

2021 Sea-Doo GTI 130
2021 Sea-Doo GTI SE 130
2021 Sea-Doo GTR 230
2021 Sea-Doo GTI 90
2021 Sea-Doo GTI SE 170
2021 Sea-Doo Wake 170

2022 Sea-Doo GTI 130
2022 Sea-Doo GTI SE 130
2022 Sea-Doo GTR 230
2022 Sea-Doo GTI 90
2022 Sea-Doo GTI SE 170
2022 Sea-Doo Wake 170
2022 Sea-Doo Fish Pro Scout 130

2023 Sea-Doo GTI 130
2023 Sea-Doo GTI SE 130
2023 Sea-Doo GTR 230
2023 Sea-Doo GTI 90
2023 Sea-Doo GTI SE 170
2023 Sea-Doo Wake 170
2023 Sea-Doo Fish Pro Scout 130

2024 Sea-Doo GTI 130
2024 Sea-Doo GTI SE 130
2024 Sea-Doo GTR 230
2024 Sea-Doo GTI SE 170
2024 Sea-Doo Wake 170
2024 Sea-Doo Fish Pro Scout 130

2025 Sea-Doo GTI SE 130
2025 Sea-Doo GTI SE 170
2025 Sea-Doo GTR 230
2025 Sea-Doo Wake 170
2025 Sea-Doo Fish Pro Scout 130

Visit the Custom Features page to learn more about colors, textures, and more.