Comercio

2008 Hurricane Sundeck 2200 Swim Platform Cockpit Mat EVA Foam Teak Flooring

Notes:

Please confirm your boat type before adding to cart. If you are not sure if it fits your needs, you can contact us online or send us an email to confirm the size.

If you want to add logo or pattern, you can send JPG image to our email, we will design the pattern and send it to you for confirmation, of course you need to pay extra fee.

Description:

Material: EVA foam
Texture: Brushed / Embossed (Default Brushed)
Thickness: 6mm
Hardness: 60°- 65°
UV: ≥4.5G
Adhesive: 3M99786 (3M Self-Adhesive Backing - No need to buy glue)
If you need other colors, you can email eric@hjdeck.com, we are a factory and can realize the colors you want.

For Design:

1. We can design drawings according to customers' requirements (free of charge).

2. We can provide design drawings for your choice.

3. Support LOGO customization, need file, format file: DXF/AI/PDF/JPJ/PNG, etc.

Installation Notes:

1. Before installation the floor needs to be cleaned with acetone or alcohol (to remove the wax from the surface of the new boat) and make sure it is dry before starting the installation.
2. Lay all EVA flooring flat before installation. After confirming the position, tear off the adhesive backing on one corner and start the installation.
3. Fix the adhesive and do not move the EVA flooring.
4. Use the round wheel to roll during the installation process (you need to press the 5. LOGO position with your finger in advance to avoid air entry). If there is air generated, a small needle can be used to puncture the bubble exclusion.
Note: 48 hours after installation shall not be immersed in water.

Making Templates:

If we don't have a matching boat in our sales list, please provide us with a template and we can manufacture it according to your template requirements. More details of customized templates are available: https://www.hjdeck.com/pages/custom-features#section6

2004 Larson 210 LXI Cockpit & Swim Platform 1/4" 6mm EVA Foam Boat Flooring

Precautions

Please confirm your boat type before adding to the shopping cart. If you are not sure whether it meets your needs, you can contact us online or send us an email to confirm the size.

If you want to add your logo or want to add a pattern, you can send a JPG picture to our email, we will design a pattern and send it to you for confirmation, of course there will be a little extra cost that you need to pay.


Products information

Material:EVA foam
Thickness:6mm
Hardness: 60°- 65°
Color：Teak Brown Black /Gray Black
Or if you need other colors, you can email us, we are a factory and can realize the colors you want
UV: ≥4.5G
Adhesive:3M99786 （ Self-Adhesive Backing - No need to buy glue）

2007 Crownline 220 EX EVA Foam Faux Teak Boat Deck Mat Flooring Marine Boat Decking Carpet Yacht Pad

There is a cutout for a table in the front section.

Application Guide:

2005 Crownline 220 EX
2006 Crownline 220 EX
2007 Crownline 220 EX
2008 Crownline 220 EX
2009 Crownline 220 EX
2010 Crownline 220 EX

Notes:

Please confirm your boat type before adding to cart. If you are not sure if it fits your needs, you can contact us online or send us an email to confirm the size.

If you want to add logo or pattern, you can send JPG image to our email, we will design the pattern and send it to you for confirmation, of course you need to pay extra fee.

Description:

Material: EVA foam
Texture: Brushed / Embossed (Default Brushed)
Thickness: 6mm
Hardness: 60°- 65°
UV: ≥4.5G
Adhesive: 3M99786 (3M Self-Adhesive Backing - No need to buy glue)
If you need other colors, you can email eric@hjdeck.com, we are a factory and can realize the colors you want.

For Design:

1. We can design drawings according to customers' requirements (free of charge).

2. We can provide design drawings for your choice.

3. Support LOGO customization, need file, format file: DXF/AI/PDF/JPJ/PNG, etc.

Installation Notes:

1. Before installation the floor needs to be cleaned with acetone or alcohol (to remove the wax from the surface of the new boat) and make sure it is dry before starting the installation.
2. Lay all EVA flooring flat before installation. After confirming the position, tear off the adhesive backing on one corner and start the installation.
3. Fix the adhesive and do not move the EVA flooring.
4. Use the round wheel to roll during the installation process (you need to press the 5. LOGO position with your finger in advance to avoid air entry). If there is air generated, a small needle can be used to puncture the bubble exclusion.
Note: 48 hours after installation shall not be immersed in water.

Making Templates:

If we don't have a matching boat in our sales list, please provide us with a template and we can manufacture it according to your template requirements. More details of customized templates are available: https://www.hjdeck.com/pages/custom-features#section6

2007 Crownline 252 EX EVA Foam Faux Teak Boat Deck Mat Flooring Marine Boat Decking Carpet Yacht Pad

Notes:

Please confirm your boat type before adding to cart. If you are not sure if it fits your needs, you can contact us online or send us an email to confirm the size.

If you want to add logo or pattern, you can send JPG image to our email, we will design the pattern and send it to you for confirmation, of course you need to pay extra fee.

Description:

Material: EVA foam
Texture: Brushed / Embossed (Default Brushed)
Thickness: 6mm
Hardness: 60°- 65°
UV: ≥4.5G
Adhesive: 3M99786 (3M Self-Adhesive Backing - No need to buy glue)
If you need other colors, you can email eric@hjdeck.com, we are a factory and can realize the colors you want.

For Design:

1. We can design drawings according to customers' requirements (free of charge).

2. We can provide design drawings for your choice.

3. Support LOGO customization, need file, format file: DXF/AI/PDF/JPJ/PNG, etc.

Installation Notes:

1. Before installation the floor needs to be cleaned with acetone or alcohol (to remove the wax from the surface of the new boat) and make sure it is dry before starting the installation.
2. Lay all EVA flooring flat before installation. After confirming the position, tear off the adhesive backing on one corner and start the installation.
3. Fix the adhesive and do not move the EVA flooring.
4. Use the round wheel to roll during the installation process (you need to press the 5. LOGO position with your finger in advance to avoid air entry). If there is air generated, a small needle can be used to puncture the bubble exclusion.
Note: 48 hours after installation shall not be immersed in water.

Making Templates:

If we don't have a matching boat in our sales list, please provide us with a template and we can manufacture it according to your template requirements. More details of customized templates are available: https://www.hjdeck.com/pages/custom-features#section6

2001-2004 Sea Ray 240 Sundancer EVA Foam Faux Teak Boat Deck Mat Flooring Marine Decking Carpet Pad

Notes:

Please confirm your boat type before adding to cart. If you are not sure if it fits your needs, you can contact us online or send us an email to confirm the size.

If you want to add logo or pattern, you can send JPG image to our email, we will design the pattern and send it to you for confirmation, of course you need to pay extra fee.

Description:

Material: EVA foam
Texture: Brushed / Embossed (Default Brushed)
Thickness: 6mm
Hardness: 60°- 65°
UV: ≥4.5G
Adhesive: 3M99786 (3M Self-Adhesive Backing - No need to buy glue)
If you need other colors, you can email eric@hjdeck.com, we are a factory and can realize the colors you want.

For Design:

1. We can design drawings according to customers' requirements (free of charge).

2. We can provide design drawings for your choice.

3. Support LOGO customization, need file, format file: DXF/AI/PDF/JPJ/PNG, etc.

Installation Notes:

1. Before installation the floor needs to be cleaned with acetone or alcohol (to remove the wax from the surface of the new boat) and make sure it is dry before starting the installation.
2. Lay all EVA flooring flat before installation. After confirming the position, tear off the adhesive backing on one corner and start the installation.
3. Fix the adhesive and do not move the EVA flooring.
4. Use the round wheel to roll during the installation process (you need to press the 5. LOGO position with your finger in advance to avoid air entry). If there is air generated, a small needle can be used to puncture the bubble exclusion.
Note: 48 hours after installation shall not be immersed in water.

Making Templates:

If we don't have a matching boat in our sales list, please provide us with a template and we can manufacture it according to your template requirements. More details of customized templates are available: https://www.hjdeck.com/pages/custom-features#section6

1991 SeaRay Sundancer EVA Foam Faux Teak Boat Deck Mat Flooring Marine Decking Carpet Pad

Notes:

Please confirm your boat type before adding to cart. If you are not sure if it fits your needs, you can contact us online or send us an email to confirm the size.

If you want to add logo or pattern, you can send JPG image to our email, we will design the pattern and send it to you for confirmation, of course you need to pay extra fee.

Description:

Material: EVA foam
Texture: Brushed / Embossed (Default Brushed)
Thickness: 6mm
Hardness: 60°- 65°
UV: ≥4.5G
Adhesive: 3M99786 (3M Self-Adhesive Backing - No need to buy glue)
If you need other colors, you can email eric@hjdeck.com, we are a factory and can realize the colors you want.

For Design:

1. We can design drawings according to customers' requirements (free of charge).

2. We can provide design drawings for your choice.

3. Support LOGO customization, need file, format file: DXF/AI/PDF/JPJ/PNG, etc.

Installation Notes:

1. Before installation the floor needs to be cleaned with acetone or alcohol (to remove the wax from the surface of the new boat) and make sure it is dry before starting the installation.
2. Lay all EVA flooring flat before installation. After confirming the position, tear off the adhesive backing on one corner and start the installation.
3. Fix the adhesive and do not move the EVA flooring.
4. Use the round wheel to roll during the installation process (you need to press the 5. LOGO position with your finger in advance to avoid air entry). If there is air generated, a small needle can be used to puncture the bubble exclusion.
Note: 48 hours after installation shall not be immersed in water.

Making Templates:

If we don't have a matching boat in our sales list, please provide us with a template and we can manufacture it according to your template requirements. More details of customized templates are available: https://www.hjdeck.com/pages/custom-features#section6

Kawasaki Ultra 160LX 310LX 2023 Jet Ski Traction Mats EVA Foam PWC Mat Kits

Precautions

Before placing an order, please note that this kit does not have dimensions. To ensure a perfect fit, we recommend drawing a template and sending it to us.

Products information

Material: EVA foam
Thickness: 6mm
Hardness: 60°- 65°
Or if you need other colors, you can email us, we are a factory and can realize the colors you want
UV: ≥4.5G
Adhesive: 3M99786 （Self-Adhesive Backing - No need to buy glue）

Application Guide:

2026 Kawasaki Ultra 160LX
2026 Kawasaki Ultra 160LX-S
2026 Kawasaki Ultra 310LX
2026 Kawasaki Ultra 310LX-S
2024 Kawasaki Ultra 160LX
2023 Kawasaki Ultra 160LX

We use the best quality Grade A EVA environmental protection material

1. Elastic, not easy deformation, not easy to tear.
2. High Density, not easy to damage. Odorless, non-toxic.
3. Self-adhesion, easy to installation.
4. Stain resistant & very easy to maintain, can also be pressure washed.
5. Provides a non-slippery surface for your boat in both wet & dry conditions.

1. Customized colors is available.
2. Customized thickness is available.
3. Customized size in you requirement.
4. Customized shape according to supply drawing.
5. Customized logo: We can make logo for your marine traction pad.

Check out our Custom Features page for more information on colors, textures, and more.

2002 Cruiser Yachts 3470 Express EVA Foam Faux Teak Boat Deck Mat Flooring Marine Decking Carpet Yacht Pad

Precautions before payment:

• 1. Please make sure the boat model matches your yacht/boat model.
• 2. Some boat models have different configurations and options, please pay attention to choose the most suitable boat model.
• 3. If you are not sure if your boat matches the drawing, please send us photos of the swim platform and cockpit, we can help to determine the suitability.

We use the best quality Grade A EVA environmental protection material

• 1. Elastic, not easy deformation, not easy to tear.
• 2. High Density, not easy to damage. Odorless, non-toxic.
• 3. Self-adhesion, easy to installation.
• 4. Stain resistant & very easy to maintain, can also be pressure washed.
• 5. Provides a non-slippery surface for your boat in both wet & dry conditions.

Product Description:

1. Customized colors is available.
2. Customized thickness is available.
3. Customized size in you requirement.
4. Customized shape according to supply drawing.
5. Customized logo: We can make logo for your marine traction pad.

For Design:

1. We can design drawings according to customers' requirements (free of charge).

2. We can provide design drawings for your choice.

3. Support LOGO customization, need file, format file: DXF/AI/PDF/JPJ/PNG, etc.

Making Templates:

If we don't have a matching boat in our sales list, please provide us with a template and we can manufacture it according to your template requirements. More details of customized templates are available: https://www.hjdeck.com/pages/custom-features#section6

Production period:

Confirm the size with you after receiving the payment, start production after confirming the size, the production process usually takes about 5-12 working days (holidays postponed), we will send you the photos and ship the order after the production is completed.

The production period for orders with customized colors/templates takes about 10-25 working days to ship.

Installation Notes:

Before installation the floor needs to be cleaned with acetone or alcohol (to remove the wax from the surface of the new boat) and make sure it is dry before starting the installation.
Lay all EVA flooring flat before installation. After confirming the position, tear off the adhesive backing on one corner and start the installation.
Fix the adhesive and do not move the EVA flooring.
Use the round wheel to roll during the installation process (you need to press the LOGO position with your finger in advance to avoid air entry). If there is air generated, a small needle can be used to puncture the bubble exclusion.
48 hours after installation shall not be immersed in water.

Upgrade your boat with stylish and functional EVA Foam Decking from Our Designs. Our EVA foam is a high performance, cushioned decking material that feels comfortable and stable underfoot. And with its stunning good looks, it adds a clean, high-end look to your vessel.

Other:

You can choose any parts shown in the drawing to place an order, and we can provide corresponding production and sales support.

Discounts are available for repeat orders, please feel free to contact us!

Click here to contact us.

1994 Cruisers ARIA 3120 EVA Foam Faux Teak Boat Deck Mat Flooring Marine Decking Carpet Yacht Pad

Precautions before payment:

• 1. Please make sure the boat model matches your yacht/boat model.
• 2. Some boat models have different configurations and options, please pay attention to choose the most suitable boat model.
• 3. If you are not sure if your boat matches the drawing, please send us photos of the swim platform and cockpit, we can help to determine the suitability.

We use the best quality Grade A EVA environmental protection material

• 1. Elastic, not easy deformation, not easy to tear.
• 2. High Density, not easy to damage. Odorless, non-toxic.
• 3. Self-adhesion, easy to installation.
• 4. Stain resistant & very easy to maintain, can also be pressure washed.
• 5. Provides a non-slippery surface for your boat in both wet & dry conditions.

Product Description:

1. Customized colors is available.
2. Customized thickness is available.
3. Customized size in you requirement.
4. Customized shape according to supply drawing.
5. Customized logo: We can make logo for your marine traction pad.

For Design:

1. We can design drawings according to customers' requirements (free of charge).

2. We can provide design drawings for your choice.

3. Support LOGO customization, need file, format file: DXF/AI/PDF/JPJ/PNG, etc.

Making Templates:

If we don't have a matching boat in our sales list, please provide us with a template and we can manufacture it according to your template requirements. More details of customized templates are available: https://www.hjdeck.com/pages/custom-features#section6

Production period:

Confirm the size with you after receiving the payment, start production after confirming the size, the production process usually takes about 5-12 working days (holidays postponed), we will send you the photos and ship the order after the production is completed.

The production period for orders with customized colors/templates takes about 10-25 working days to ship.

Installation Notes:

Before installation the floor needs to be cleaned with acetone or alcohol (to remove the wax from the surface of the new boat) and make sure it is dry before starting the installation.
Lay all EVA flooring flat before installation. After confirming the position, tear off the adhesive backing on one corner and start the installation.
Fix the adhesive and do not move the EVA flooring.
Use the round wheel to roll during the installation process (you need to press the LOGO position with your finger in advance to avoid air entry). If there is air generated, a small needle can be used to puncture the bubble exclusion.
48 hours after installation shall not be immersed in water.

Upgrade your boat with stylish and functional EVA Foam Decking from Our Designs. Our EVA foam is a high performance, cushioned decking material that feels comfortable and stable underfoot. And with its stunning good looks, it adds a clean, high-end look to your vessel.

Other:

You can choose any parts shown in the drawing to place an order, and we can provide corresponding production and sales support.

Discounts are available for repeat orders, please feel free to contact us!

Click here to contact us.

Fountain 29 Heat 2001 Engine Room EVA Foam Faux Teak Boat Deck Mat Flooring Marine Boat Decking Pad

Precautions before payment:

• 1. Please make sure the boat model matches your yacht/boat model.
• 2. Some boat models have different configurations and options, please pay attention to choose the most suitable boat model.
• 3. If you are not sure if your boat matches the drawing, please send us photos of the swim platform and cockpit, we can help to determine the suitability.

We use the best quality Grade A EVA environmental protection material

• 1. Elastic, not easy deformation, not easy to tear.
• 2. High Density, not easy to damage. Odorless, non-toxic.
• 3. Self-adhesion, easy to installation.
• 4. Stain resistant & very easy to maintain, can also be pressure washed.
• 5. Provides a non-slippery surface for your boat in both wet & dry conditions.

Product Description:

1. Customized colors is available.
2. Customized thickness is available.
3. Customized size in you requirement.
4. Customized shape according to supply drawing.
5. Customized logo: We can make logo for your marine traction pad.

For Design:

1. We can design drawings according to customers' requirements (free of charge).

2. We can provide design drawings for your choice.

3. Support LOGO customization, need file, format file: DXF/AI/PDF/JPJ/PNG, etc.

Making Templates:

If we don't have a matching boat in our sales list, please provide us with a template and we can manufacture it according to your template requirements. More details of customized templates are available: https://www.hjdeck.com/pages/custom-features#section6

Production period:

Confirm the size with you after receiving the payment, start production after confirming the size, the production process usually takes about 5-12 working days (holidays postponed), we will send you the photos and ship the order after the production is completed.

The production period for orders with customized colors/templates takes about 10-25 working days to ship.

Installation Notes:

Before installation the floor needs to be cleaned with acetone or alcohol (to remove the wax from the surface of the new boat) and make sure it is dry before starting the installation.
Lay all EVA flooring flat before installation. After confirming the position, tear off the adhesive backing on one corner and start the installation.
Fix the adhesive and do not move the EVA flooring.
Use the round wheel to roll during the installation process (you need to press the LOGO position with your finger in advance to avoid air entry). If there is air generated, a small needle can be used to puncture the bubble exclusion.
48 hours after installation shall not be immersed in water.

Upgrade your boat with stylish and functional EVA Foam Decking from Our Designs. Our EVA foam is a high performance, cushioned decking material that feels comfortable and stable underfoot. And with its stunning good looks, it adds a clean, high-end look to your vessel.

Other:

You can choose any parts shown in the drawing to place an order, and we can provide corresponding production and sales support.

Discounts are available for repeat orders, please feel free to contact us!

Click here to contact us.