Wet Sounds SHIVR-55 QT Cooler Pad
Get the most out of your Tundra cooler with Hjdeck cooler traction pads.
Cooler Traction Pad. It features a pressure sensitive adhesive back to permanently secure the backing, so you get better traction and less worry when using your cooler as a casting platform.
In addition, your cooler becomes a more comfortable seat because Hjdeck cooler traction pads are made of 6 mm.
Made of 6mm EVA foam. Custom fit for YETI Tundra Cooler 35-160 models.
Material: EVA foam
Thickness: 6mm
Hardness: 60°- 65°
UV: ≥4.5G
1. Customized colors is available.
2. Customized thickness is available.
3. Customized size in you requirement.
4. Customized shape according to supply drawing.
5. Customized logo: We can make logo for your cooler pad.
Yeti Tundra Haul Cooler Pad
Get the most out of your Tundra cooler with Hjdeck cooler traction pads.
Cooler Traction Pad. It features a pressure sensitive adhesive back to permanently secure the backing, so you get better traction and less worry when using your cooler as a casting platform.
In addition, your cooler becomes a more comfortable seat because Hjdeck cooler traction pads are made of 6 mm.
Made of 6mm EVA foam. Custom fit for YETI Tundra Cooler 35-160 models.
Material: EVA foam
Thickness: 6mm
Hardness: 60°- 65°
UV: ≥4.5G
1. Customized colors is available.
2. Customized thickness is available.
3. Customized size in you requirement.
4. Customized shape according to supply drawing.
5. Customized logo: We can make logo for your cooler pad.
Yeti Tundra 250 Cooler Pad
Get the most out of your Tundra cooler with Hjdeck cooler traction pads.
Cooler Traction Pad. It features a pressure sensitive adhesive back to permanently secure the backing, so you get better traction and less worry when using your cooler as a casting platform.
In addition, your cooler becomes a more comfortable seat because Hjdeck cooler traction pads are made of 6 mm.
Made of 6mm EVA foam. Custom fit for YETI Tundra Cooler 35-160 models.
Material: EVA foam
Thickness: 6mm
Hardness: 60°- 65°
UV: ≥4.5G
1. Customized colors is available.
2. Customized thickness is available.
3. Customized size in you requirement.
4. Customized shape according to supply drawing.
5. Customized logo: We can make logo for your cooler pad.
Yeti Tundra 125 Cooler Pad
Get the most out of your Tundra cooler with Hjdeck cooler traction pads.
Cooler Traction Pad. It features a pressure sensitive adhesive back to permanently secure the backing, so you get better traction and less worry when using your cooler as a casting platform.
In addition, your cooler becomes a more comfortable seat because Hjdeck cooler traction pads are made of 6 mm.
Made of 6mm EVA foam. Custom fit for YETI Tundra Cooler 35-160 models.
Material: EVA foam
Thickness: 6mm
Hardness: 60°- 65°
UV: ≥4.5G
1. Customized colors is available.
2. Customized thickness is available.
3. Customized size in you requirement.
4. Customized shape according to supply drawing.
5. Customized logo: We can make logo for your cooler pad.
Yeti Tundra 105 Cooler Pad
Get the most out of your Tundra cooler with Hjdeck cooler traction pads.
Cooler Traction Pad. It features a pressure sensitive adhesive back to permanently secure the backing, so you get better traction and less worry when using your cooler as a casting platform.
In addition, your cooler becomes a more comfortable seat because Hjdeck cooler traction pads are made of 6 mm.
Made of 6mm EVA foam. Custom fit for YETI Tundra Cooler 35-160 models.
Material: EVA foam
Thickness: 6mm
Hardness: 60°- 65°
UV: ≥4.5G
1. Customized colors is available.
2. Customized thickness is available.
3. Customized size in you requirement.
4. Customized shape according to supply drawing.
5. Customized logo: We can make logo for your cooler pad.
Yeti Tundra 65 Cooler Pad
Get the most out of your Tundra cooler with Hjdeck cooler traction pads.
Cooler Traction Pad. It features a pressure sensitive adhesive back to permanently secure the backing, so you get better traction and less worry when using your cooler as a casting platform.
In addition, your cooler becomes a more comfortable seat because Hjdeck cooler traction pads are made of 6 mm.
Made of 6mm EVA foam. Custom fit for YETI Tundra Cooler 35-160 models.
Material: EVA foam
Thickness: 6mm
Hardness: 60°- 65°
UV: ≥4.5G
1. Customized colors is available.
2. Customized thickness is available.
3. Customized size in you requirement.
4. Customized shape according to supply drawing.
5. Customized logo: We can make logo for your cooler pad.
Yeti Tundra 50 Cooler Pad
Get the most out of your Tundra cooler with Hjdeck cooler traction pads.
Cooler Traction Pad. It features a pressure sensitive adhesive back to permanently secure the backing, so you get better traction and less worry when using your cooler as a casting platform.
In addition, your cooler becomes a more comfortable seat because Hjdeck cooler traction pads are made of 6 mm.
Made of 6mm EVA foam. Custom fit for YETI Tundra Cooler 35-160 models.
Material: EVA foam
Thickness: 6mm
Hardness: 60°- 65°
UV: ≥4.5G
1. Customized colors is available.
2. Customized thickness is available.
3. Customized size in you requirement.
4. Customized shape according to supply drawing.
5. Customized logo: We can make logo for your cooler pad.
2017 Chaparral Boats H2O 21 SPORT EVA Foam Faux Teak Boat Deck MatteMarine Flooring Marine Boat Decking Carpet Yacht Pad
Notes:
Please confirm your boat type before adding to cart. If you are not sure if it fits your needs, you can contact us online or send us an email to confirm the size.
If you want to add logo or pattern, you can send JPG image to our email, we will design the pattern and send it to you for confirmation, of course you need to pay extra fee.
Description:
Material: EVA foam
Texture: Brushed / Embossed (Default Brushed)
Thickness: 6mm
Hardness: 60°- 65°
UV: ≥4.5G
Adhesive: 3M99786 (3M Self-Adhesive Backing - No need to buy glue)
If you need other colors, you can email eric@hjdeck.com, we are a factory and can realize the colors you want.
For Design:
1. We can design drawings according to customers' requirements (free of charge).
2. We can provide design drawings for your choice.
3. Support LOGO customization, need file, format file: DXF/AI/PDF/JPJ/PNG, etc.
Installation Notes:
1. Before installation the floor needs to be cleaned with acetone or alcohol (to remove the wax from the surface of the new boat) and make sure it is dry before starting the installation.
2. Lay all EVA flooring flat before installation. After confirming the position, tear off the adhesive backing on one corner and start the installation.
3. Fix the adhesive and do not move the EVA flooring.
4. Use the round wheel to roll during the installation process (you need to press the 5. LOGO position with your finger in advance to avoid air entry). If there is air generated, a small needle can be used to puncture the bubble exclusion.
Note: 48 hours after installation shall not be immersed in water.
Making Templates:
If we don't have a matching boat in our sales list, please provide us with a template and we can manufacture it according to your template requirements. More details of customized templates are available: https://www.hjdeck.com/pages/custom-features#section6
2016 Chaparral 21 H2O Swim Platform with Extension EVA Decking Kits
2016 Chaparral 21 H2O Swim Platform with Extension EVA Decking Kits
2016 Chaparral 21 H2O EVA Foam Faux Teak Boat Deck Mat Flooring Marine Decking Carpet Pad
Precautions before payment:
- 1. Please make sure the boat model matches your yacht/boat model.
- 2. Some boat models have different configurations and options, please pay attention to choose the most suitable boat model.
- 3. If you are not sure if your boat matches the drawing, please send us photos of the swim platform and cockpit, we can help to determine the suitability.
We use the best quality Grade A EVA environmental protection material
- 1. Elastic, not easy deformation, not easy to tear.
- 2. High Density, not easy to damage. Odorless, non-toxic.
- 3. Self-adhesion, easy to installation.
- 4. Stain resistant & very easy to maintain, can also be pressure washed.
- 5. Provides a non-slippery surface for your boat in both wet & dry conditions.
Product Description:
|
Material
|
Closed Cell EVA Foam
|
|
Hardness
|
60°-65°
|
|
Thickness
|
6 mm
|
|
Textures
|
Customizable
|
|
Adhesive
|
3M99786
|
1. Customized colors is available.
2. Customized thickness is available.
3. Customized size in you requirement.
4. Customized shape according to supply drawing.
5. Customized logo: We can make logo for your marine traction pad.
For Design:
1. We can design drawings according to customers' requirements (free of charge).
2. We can provide design drawings for your choice.
3. Support LOGO customization, need file, format file: DXF/AI/PDF/JPJ/PNG, etc.
Making Templates:
If we don't have a matching boat in our sales list, please provide us with a template and we can manufacture it according to your template requirements. More details of customized templates are available: https://www.hjdeck.com/pages/custom-features#section6
Production period:
Confirm the size with you after receiving the payment, start production after confirming the size, the production process usually takes about 5-12 working days (holidays postponed), we will send you the photos and ship the order after the production is completed.
The production period for orders with customized colors/templates takes about 10-25 working days to ship.
Installation Notes:
Before installation the floor needs to be cleaned with acetone or alcohol (to remove the wax from the surface of the new boat) and make sure it is dry before starting the installation.
Lay all EVA flooring flat before installation. After confirming the position, tear off the adhesive backing on one corner and start the installation.
Fix the adhesive and do not move the EVA flooring.
Use the round wheel to roll during the installation process (you need to press the LOGO position with your finger in advance to avoid air entry). If there is air generated, a small needle can be used to puncture the bubble exclusion.
48 hours after installation shall not be immersed in water.
Upgrade your boat with stylish and functional EVA Foam Decking from Our Designs. Our EVA foam is a high performance, cushioned decking material that feels comfortable and stable underfoot. And with its stunning good looks, it adds a clean, high-end look to your vessel.
Other:
You can choose any parts shown in the drawing to place an order, and we can provide corresponding production and sales support.
Discounts are available for repeat orders, please feel free to contact us!
Application Guide:
2016 Chaparral 21 H20 Deluxe
2002 Monterey Montura 248 LS EVA Foam Faux Teak Boat Deck Mat Flooring
2002 Monterey Montura 248 LS EVA Foam Faux Teak Boat Deck Mat Flooring
2002 Monterey Montura 248LS EVA Foam Faux Teak Boat Deck MatteMarine Flooring Marine Boat Decking Pad
Notes:
Please confirm your boat type before adding to cart. If you are not sure if it fits your needs, you can contact us online or send us an email to confirm the size.
If you want to add logo or pattern, you can send JPG image to our email, we will design the pattern and send it to you for confirmation, of course you need to pay extra fee.
Description:
Material: EVA foam
Texture: Brushed / Embossed (Default Brushed)
Thickness: 6mm
Hardness: 60°- 65°
UV: ≥4.5G
Adhesive: 3M99786 (3M Self-Adhesive Backing - No need to buy glue)
If you need other colors, you can email eric@hjdeck.com, we are a factory and can realize the colors you want.
For Design:
1. We can design drawings according to customers' requirements (free of charge).
2. We can provide design drawings for your choice.
3. Support LOGO customization, need file, format file: DXF/AI/PDF/JPJ/PNG, etc.
Installation Notes:
1. Before installation the floor needs to be cleaned with acetone or alcohol (to remove the wax from the surface of the new boat) and make sure it is dry before starting the installation.
2. Lay all EVA flooring flat before installation. After confirming the position, tear off the adhesive backing on one corner and start the installation.
3. Fix the adhesive and do not move the EVA flooring.
4. Use the round wheel to roll during the installation process (you need to press the 5. LOGO position with your finger in advance to avoid air entry). If there is air generated, a small needle can be used to puncture the bubble exclusion.
Note: 48 hours after installation shall not be immersed in water.
Making Templates:
If we don't have a matching boat in our sales list, please provide us with a template and we can manufacture it according to your template requirements. More details of customized templates are available: https://www.hjdeck.com/pages/custom-features#section6
Share contact information, store details, and brand content with your customers.
Contact: eric@hjdeck.com
Share contact information, store details, and brand content with your customers.
Contact: eric@hjdeck.com