Newest Products

2001 Crownline 202 BR EVA Foam Faux Teak Boat Deck MatteMarine Flooring Marine Boat Decking Carpet

Notes:

Please confirm your boat type before adding to cart. If you are not sure if it fits your needs, you can contact us online or send us an email to confirm the size.

If you want to add logo or pattern, you can send JPG image to our email, we will design the pattern and send it to you for confirmation, of course you need to pay extra fee.

Description:

Material: EVA foam
Texture: Brushed / Embossed (Default Brushed)
Thickness: 6mm
Hardness: 60°- 65°
UV: ≥4.5G
Adhesive: 3M99786 (3M Self-Adhesive Backing - No need to buy glue)
If you need other colors, you can email eric@hjdeck.com, we are a factory and can realize the colors you want.

For Design:

1. We can design drawings according to customers' requirements (free of charge).

2. We can provide design drawings for your choice.

3. Support LOGO customization, need file, format file: DXF/AI/PDF/JPJ/PNG, etc.

Installation Notes:

1. Before installation the floor needs to be cleaned with acetone or alcohol (to remove the wax from the surface of the new boat) and make sure it is dry before starting the installation.
2. Lay all EVA flooring flat before installation. After confirming the position, tear off the adhesive backing on one corner and start the installation.
3. Fix the adhesive and do not move the EVA flooring.
4. Use the round wheel to roll during the installation process (you need to press the 5. LOGO position with your finger in advance to avoid air entry). If there is air generated, a small needle can be used to puncture the bubble exclusion.
Note: 48 hours after installation shall not be immersed in water.

Making Templates:

If we don't have a matching boat in our sales list, please provide us with a template and we can manufacture it according to your template requirements. More details of customized templates are available: https://www.hjdeck.com/pages/custom-features#section6

2008 Malibu Wakesetter 24 LSV Boat Swim Deck Pads 6mm EVA Foam Boat Decking

EVA Material Properties:

1. EVA material is a high-density sponge that does not absorb moisture, making it resistant to water damage and mold growth.

2. EVA material is known for its soft and comfortable texture, offering a pleasant tactile experience and enhancing user comfort.

3. It is easy to maintain EVA material by using common cleaning agents. It can be easily cleaned by rinsing with a brush and water, ensuring hassle-free upkeep.

4. EVA material exhibits high and low temperature resistance, allowing it to withstand extreme weather conditions and maintain its performance and integrity.

5. With excellent sound insulation and anti-vibration properties, EVA material helps reduce noise transmission and vibrations, creating a quieter and more comfortable environment.

6. EVA material is easy to replace and install, requiring no additional auxiliary materials. Its versatility and simplicity make it a convenient choice for various applications.

Precautions before payment:

1. Please make sure the boat model matches your yacht/boat model.

2. Some boat models have different configurations and options, please pay attention to choose the most suitable boat model.

3. If you are not sure if your boat matches the drawing, please send us photos of the swim platform and cockpit, we can help to determine the suitability.

Products information

Material: EVA foam
Thickness: 6mm
Hardness: 60°- 65° 
Color: Brown Black /Gray Black
Or if you need other colors, you can email us, we are a factory and can realize the colors you want
UV: ≥4.5G (UV resistant without color fading)
Adhesive: 3M99786 (Self-Adhesive Backing - No need to buy glue)
Support for customized services (Colors, Patterns, Logo, etc)

For Design:

1. We can design drawings according to customers' requirements (free of charge).

2. We can provide design drawings for your choice.

3. Support LOGO customization, need file, format file: DXF/AI/PDF/JPJ/PNG, etc.

Installation Notes:

1. Before installation the floor needs to be cleaned with acetone or alcohol (to remove the wax from the surface of the new boat) and make sure it is dry before starting the installation.

2. Lay all EVA flooring flat before installation. After confirming the position, tear off the adhesive backing on one corner and start the installation.

3. Fix the adhesive and do not move the EVA flooring.

4. Use the round wheel to roll during the installation process (you need to press the LOGO position with your finger in advance to avoid air entry). If there is air generated, a small needle can be used to puncture the bubble exclusion.

5. 48 hours after installation shall not be immersed in water.

Making Templates:

If we don't have a matching boat in our sales list, please provide us with a template and we can manufacture it according to your template requirements. More details of customized templates are available: https://www.hjdeck.com/pages/custom-features#section6

Production period:

Confirm the size with you after receiving the payment, start production after confirming the size, the production process usually takes about 5-12 working days (holidays postponed), we will send you the photos and ship the order after the production is completed.

The production period for orders with customized colors/templates takes about 15-25 working days to ship.

Other:

You can choose any parts shown in the drawing to place an order, and we can provide corresponding production and sales support.

Discounts are available for repeat orders, please feel free to contact us!

Please feel free to contact us for any other questions/issues! Email: Eric@hjdeck.com

Elevate your boat’s style and performance with our sleek, modern EVA Foam Cooler Lid/Top—designed for durability, comfort, and unmatched functionality. 

Featuring a non-slip, UV-resistant, and easy-to-clean surface, this upgrade enhances both aesthetics and usability. Choose from 33 vibrant colors and personalize it with your custom logo to make a bold statement on the water.

Crafted from Hjdeck's proprietary EVA foam blend, this cooler lid is built to withstand the toughest bass boat conditions. The 100% non-absorbent material ensures a dry, slip-free surface, while the ¼" dual-color construction offers a premium look and feel.

✔ 100% Waterproof & Non-Absorbent
✔ Guaranteed Perfect Fit
✔ Fully Customizable with Your Logo
✔ Easy Peel & Stick Installation
✔ Dedicated Customer Support

Make your Skeeter stand out—upgrade today and experience the ultimate blend of style and performance!

Available in 33 colors. Add your logo for a personalized touch!

Would you like any refinements to better match a specific brand voice?

Notes:

No dimensions, just drawings. Need to provide size production.

Description:

Material: EVA foam
Texture: Brushed / Embossed (Default Brushed)
Thickness: 6mm
Hardness: 60°- 65°
UV: ≥4.5G
Adhesive: 3M99786 (3M Self-Adhesive Backing - No need to buy glue)
If you need other colors, you can email eric@hjdeck.com, we are a factory and can realize the colors you want.

For Design:

1. We can design drawings according to customers' requirements (free of charge).

2. We can provide design drawings for your choice.

3. Support LOGO customization, need file, format file: DXF/AI/PDF/JPJ/PNG, etc.

Installation Notes:

1. Before installation the floor needs to be cleaned with acetone or alcohol (to remove the wax from the surface of the new boat) and make sure it is dry before starting the installation.
2. Lay all EVA flooring flat before installation. After confirming the position, tear off the adhesive backing on one corner and start the installation.
3. Fix the adhesive and do not move the EVA flooring.
4. Use the round wheel to roll during the installation process (you need to press the 5. LOGO position with your finger in advance to avoid air entry). If there is air generated, a small needle can be used to puncture the bubble exclusion.
Note: 48 hours after installation shall not be immersed in water.

Making Templates:

If we don't have a matching boat in our sales list, please provide us with a template and we can manufacture it according to your template requirements. More details of customized templates are available: https://www.hjdeck.com/pages/custom-features#section6

2005 Doral 36  EVA Foam Faux Teak Boat Deck MatteMarine Flooring Marine Boat Decking Carpet Yacht Vehicle Pad

Precautions

Please confirm your boat type before adding to the shopping cart. If you are not sure whether it meets your needs, you can contact us online or send us an email to confirm the size.

If you want to add your logo or want to add a pattern, you can send a JPG picture to our email, we will design a pattern and send it to you for confirmation, of course there will be a little extra cost that you need to pay.


Products information

Material: EVA foam
Thickness: 6mm
Hardness: 60°- 65°
Color：Teak Brown Black /Gray Black
Or if you need other colors, you can email us, we are a factory and can realize the colors you want
UV: ≥4.5G
Adhesive: 3M99786 （ Self-Adhesive Backing - No need to buy glue）

2003-2016 Regal 2000 EVA Foam Faux Teak Boat Deck MatteMarine Flooring Marine Boat Decking Carpet

Application:

Regal 2000 VBR 2003
Regal 2000 VBR 2004
Regal 2000 VBR 2005
Regal 2000 VBR 2006
Regal 2000 VBR 2007
Regal 2000 VBR 2008
Regal 2000 VBR 2009
Regal 2000 VBR 2010
Regal 2000 VBR 2011
Regal 2000 VBR 2012
Regal 2000 VBR 2013

Notes:

Please confirm your boat type before adding to cart. If you are not sure if it fits your needs, you can contact us online or send us an email to confirm the size.

If you want to add logo or pattern, you can send JPG image to our email, we will design the pattern and send it to you for confirmation, of course you need to pay extra fee.

Description:

Material: EVA foam
Texture: Brushed / Embossed (Default Brushed)
Thickness: 6mm
Hardness: 60°- 65°
UV: ≥4.5G
Adhesive: 3M99786 (3M Self-Adhesive Backing - No need to buy glue)
If you need other colors, you can email eric@hjdeck.com, we are a factory and can realize the colors you want.

For Design:

1. We can design drawings according to customers' requirements (free of charge).

2. We can provide design drawings for your choice.

3. Support LOGO customization, need file, format file: DXF/AI/PDF/JPJ/PNG, etc.

Installation Notes:

1. Before installation the floor needs to be cleaned with acetone or alcohol (to remove the wax from the surface of the new boat) and make sure it is dry before starting the installation.
2. Lay all EVA flooring flat before installation. After confirming the position, tear off the adhesive backing on one corner and start the installation.
3. Fix the adhesive and do not move the EVA flooring.
4. Use the round wheel to roll during the installation process (you need to press the 5. LOGO position with your finger in advance to avoid air entry). If there is air generated, a small needle can be used to puncture the bubble exclusion.
Note: 48 hours after installation shall not be immersed in water.

Making Templates:

If we don't have a matching boat in our sales list, please provide us with a template and we can manufacture it according to your template requirements. More details of customized templates are available: https://www.hjdeck.com/pages/custom-features#section6

Bison 50 QT Cooler Pad

Get the most out of your Tundra cooler with Hjdeck cooler traction pads.
Cooler Traction Pad. It features a pressure sensitive adhesive back to permanently secure the backing, so you get better traction and less worry when using your cooler as a casting platform.
In addition, your cooler becomes a more comfortable seat because Hjdeck cooler traction pads are made of 6 mm.
Made of 6mm EVA foam. Custom fit for YETI Tundra Cooler 35-160 models.

Material: EVA foam
Thickness: 6mm
Hardness: 60°- 65°
UV: ≥4.5G

1. Customized colors is available.
2. Customized thickness is available.
3. Customized size in you requirement.
4. Customized shape according to supply drawing.
5. Customized logo: We can make logo for your cooler pad.

Click here to contact us.

Bison 25 QT Cooler Pad

Get the most out of your Tundra cooler with Hjdeck cooler traction pads.
Cooler Traction Pad. It features a pressure sensitive adhesive back to permanently secure the backing, so you get better traction and less worry when using your cooler as a casting platform.
In addition, your cooler becomes a more comfortable seat because Hjdeck cooler traction pads are made of 6 mm.
Made of 6mm EVA foam. Custom fit for YETI Tundra Cooler 35-160 models.

Material: EVA foam
Thickness: 6mm
Hardness: 60°- 65°
UV: ≥4.5G

1. Customized colors is available.
2. Customized thickness is available.
3. Customized size in you requirement.
4. Customized shape according to supply drawing.
5. Customized logo: We can make logo for your cooler pad.

Click here to contact us.

Grizzly 60 Version 1 Cooler Pad

Get the most out of your Tundra cooler with Hjdeck cooler traction pads.
Cooler Traction Pad. It features a pressure sensitive adhesive back to permanently secure the backing, so you get better traction and less worry when using your cooler as a casting platform.
In addition, your cooler becomes a more comfortable seat because Hjdeck cooler traction pads are made of 6 mm.
Made of 6mm EVA foam. Custom fit for YETI Tundra Cooler 35-160 models.

Material: EVA foam
Thickness: 6mm
Hardness: 60°- 65°
UV: ≥4.5G

1. Customized colors is available.
2. Customized thickness is available.
3. Customized size in you requirement.
4. Customized shape according to supply drawing.
5. Customized logo: We can make logo for your cooler pad.

Click here to contact us.

Grizzly 40 Cooler Pad

Get the most out of your Tundra cooler with Hjdeck cooler traction pads.
Cooler Traction Pad. It features a pressure sensitive adhesive back to permanently secure the backing, so you get better traction and less worry when using your cooler as a casting platform.
In addition, your cooler becomes a more comfortable seat because Hjdeck cooler traction pads are made of 6 mm.
Made of 6mm EVA foam. Custom fit for YETI Tundra Cooler 35-160 models.

Material: EVA foam
Thickness: 6mm
Hardness: 60°- 65°
UV: ≥4.5G

1. Customized colors is available.
2. Customized thickness is available.
3. Customized size in you requirement.
4. Customized shape according to supply drawing.
5. Customized logo: We can make logo for your cooler pad.

Click here to contact us.