Adhesion Promoter Wipes for EVA Boat Flooring
Improve surface preparation before installing self-adhesive EVA foam boat flooring. These individually sealed adhesion promoter wipes are designed to help prepare compatible deck surfaces before the flooring is applied.
Simple to use: Clean the installation area, apply the adhesion promoter to the edges of the decking installation zone, allow it to sit for approximately five minutes, and then install the self-adhesive EVA decking.
Key Features
Helps prepare the deck surface before EVA flooring installation
Convenient, ready-to-use non-woven wipe
Individually sealed to help prevent drying
Easy application with no brush required
Suitable for small installation areas, edges and corners
Five individually packaged wipes included
Product Information
Product Type: Adhesion Promoter Wipe
Quantity: 5 packs / 10 packs (individually sealed)
Volume: 2 ml per pack
Applicator: Non-woven wipe
Primary Use: Surface preparation for self-adhesive EVA boat flooring
Important Compatibility Notice
Surface materials, coatings and existing finishes may react differently to an adhesion promoter. Always test on a small, hidden area before applying it to the entire deck.
Do not apply to wet, dirty, oily or recently waxed surfaces. This product does not replace the self-adhesive backing on EVA flooring and should not be described as glue.
Safety Information
Use only in a well-ventilated area.
Avoid contact with the eyes and prolonged contact with the skin.
Do not swallow.
Keep out of reach of children and pets.
Stop using the product if irritation or an allergic reaction occurs.
In case of accidental eye contact, rinse thoroughly with plenty of clean water.
Follow all instructions and warnings printed on the packaging.
Keep the packet sealed until ready to use.