ⓘ Bright colors may show UV-related color changes faster than darker colors.
Estimated Delivery between Agosto 04 and Agosto 21.
¿Busca una alfombrilla para cubierta de barco que combine estilo, seguridad y comodidad? ¡No busque más allá de nuestras alfombrillas de suelo para barcoscon textura de teca !
Fabricadas con materiales de alta calidad, estas alfombrillas están diseñadas para proporcionar una tracción fiable y resistencia al deslizamiento, incluso en condiciones húmedas o resbaladizas. La textura de teca se ve muy bien y proporciona una superficie cómoda y acolchada para tus pies, lo que reduce la fatiga y la tensión mientras estás a bordo.
Nuestras alfombrillas para suelos de barcos con textura de teca son fáciles de instalar y mantener. Colóquelos sobre cualquier superficie plana, asegúrelos con adhesivo de calidad marina o utilícelos como una opción portátil. Y cuando llegue el momento de limpiar, enjuágalos con agua y jabón, ¡así de fácil!
Estos tapetes no solo agregan un toque elegante a la cubierta de su embarcación, sino que también ayudan a proteger su inversión al evitar daños por rayones y rozaduras. Y debido a que están hechos con materiales duraderos de alta calidad, puede estar seguro de que durarán temporada tras temporada.
En resumen, nuestras alfombrillas de cubierta para suelo de barco con textura de teca ofrecen comodidad, seguridad y estilo insuperables para navegantes de todo tipo. Entonces, ¿por qué esperar? ¡Actualice su embarcación hoy y disfrute de los beneficios de estas alfombrillas de alta calidad!
Lugares de uso: yate marino, RV, piscina, jardín, hoja de suelo de barco, etc.
Delivery
The use of correct abbreviations, street numbers, building or apartment numbers, and route information (if applicable) is critical for ensuring timely delivery. We do not take responsibility for lost, misplaced, or incorrectly delivered shipments if the address information provided is incorrect or incorrectly entered at the time of purchase.
PROCESSING It normally takes 1-5 business days to process your order. Please note that holidays & weekends are not included. If items are prepared in 24 hours in your order, then we can ship it in one day.
SHIPPING Shipment takes approximately 7 to 30 business days to reach destination countries.
Note: Shipping fees are non-refundable. If you refuse any shipments from https://www.hjdeck.com/, you will be held responsible for the original shipping charges, plus the cost of returning the package to us.
We have a 30-day return policy, which means you have 30 days after receiving your item to request a return.
To be eligible for a return, your item must be in the same condition that you received it, unworn or unused, with tags, and in its original packaging. You’ll also need the receipt or proof of purchase.
To start a return, you can contact us at Eric@hjdeck.com.
If your return is accepted, we’ll send you a return shipping label, as well as instructions on how and where to send your package. Items sent back to us without first requesting a return will not be accepted.
You can always contact us for any return question at Eric@hjdeck.com.
If you need to return an item, please email eric@hjdeck.com.
Sheet items are eligible for return or exchange within 30 days of receipt.
Kits and custom items are not eligible for return.
If HJDECK makes an error in processing your order, we will provide a return label free of charge. Otherwise, the customer requesting a return will be responsible for return shipping costs. If the item or packaging is damaged or used, we will charge a 30% restocking fee for items already ready to be shipped. Approved refunds will be credited to your bank account within 15 business days of HJDECK receiving the returned item.
If your return is accepted, we’ll send you a return shipping label, as well as instructions on how and where to send your package. Items sent back to us without first requesting a return will not be accepted.
Note:
We cannot accept returns on sale items or gift cards.
Shipping fees are non-refundable. If you refuse any shipments from https://www.hjdeck.com/, you will be held responsible for the original shipping charges, plus the cost of returning the package to us.
Kits and custom items: Based on our experience, even items of the same brand and model may have size variations. Size measurements can be taken on board, covered with a film. Please allow for minor errors.
Please see our return policy page for details: https://www.hjdeck.com/policies/refund-policy
Please Note:
Due to differences in monitors and device settings, actual product color may vary slightly from the image.
An absolutely amazing product. Very easy to work with, cut, and bend or fold as needed.
I completely wrapped around the edges of all my box lids on my bass boat. Exactly like the original carpet was done. A little extra glue and some clamps insured a good hold on the tough spots.
c
crimsonteardrops23
I installed in my 2022 22ft. Heartland camper and it fit perfectly in the cargo hatch! I'm installing more in the outside pantry wall because I've noticed when the su. Hits it the food is subjected to higher temperatures comparable to a solar oven lol yikes.
S
S. S. H.
I needed something to add a little extra grip to a step that I built for getting down into the cabin of a boat I am renovating. This worked great, was easy to cut and the adhesive seems extremely stick. It worked just perfectly for my application.
S
Shane
Cut to length and made nice rv step pads worked perfect!
K
Kris Tina
Used it on my center console. Covered up a bunch of holes and scratches on the top side. Should keep stuff from sliding back and forth up there and it gives it a cleaner look as well. I used large scissors to cut the mat and it was a pretty easy process. Make sure that the surface is clean before applying it, and make sure that you have it lined up where it goes, the glue on this thing is super strong. Once its on, you’re not getting it off. I am extremely happy with this product.
Al elegir una selección, se actualiza la página completa.
Se abre en una nueva ventana.
Seth Marty
The product looks great and was easy to install!
The product looks great and was easy to install. Take your time installing to get the gaps and the lines to aligned. The results are worth it. The flooring cleans easily too with water and small amount of soap. I had two pieces that did not fit quite right, but Eric made sure I received proper pieces that fit with no hassles.
HJDECK
John George
Installed HJ mats about six weeks ago and so far so good
Installed HJ mats about six weeks ago and so far so good, was meticulous on install so should adhere for years!
This kit was an exact match and replacement to the original sea deck on our 2017 Sea Ray SDX
This kit was an exact match and replacement to the original sea deck on our 2017 Sea Ray SDX. Very easy to install and the support at HJDeck were very helpful. Would definitely recommend and will purchase again.
2017-2023 Sea Ray 270 SDX Inboard Swim Platform Pad Boat Flooring
John Paulson
Was able to get all the snaps on
Was able to get all the snaps on. couple were close but a little stretching and no problem. Love it!
2012 Chaparral 287 SSX Swim Platform Flooring
Lloyd Price
Thanks Greg at hjdecks
Thanks Greg at hjdecks. You immediately got a concept going for me and very quickly had a concept ready to make. I approved it and It was very reasonably priced and came quickly. It came in with 3m backing and installed super easy. And looks great.
Recently purchased a 2013 Monterey 280 sport cruiser
Recently purchased a 2013 Monterey 280 sport cruiser, the mats obviously needed updated as they were worn and torn off by previous owner. Purchasing was easy, measurements were verified prior to production and The mats turned out perfect! Gave our boat a brand new look!
The product is great and the kit fit like a glove, even had a couple extra pieces that I am still trying to figure out where they go, but it covered everything it said it would cover.
Looks good, feels good. My purchase was for gunnel rails on my Kawasaki jet ski. Installed about two months ago. They are still attached but they release when hot or in the sun. I have to keep applying pressure to prevent release on the long axis. They need to be 2-4 inches wider probably.
